Steel wire rope accessories make an important contribution to the safe use of steel wire ropes. Rope components are products that are used in the application of ropes or the manufacture of rope end connections. By attaching rope components to the steel wire rope, various rope applications are enabled in the first place.
Steel Wire Rope Accessories for your Specific Application
In this product category you will find rope end fittings and other steel wire rope accessories such as rope clamps, swivels, shackles, thimbles and ferrules, threaded terminals, compression clamps or compression connectors. In addition, you can find as well information on steel wire rope sheaves, blocks and lower blocks.
CERTEX also assembles steel wire ropes with high-quality accessories, made specifically for your application. Just contact us, we will be happy to advise you personally!
POWERTEX Rigging screw PRSJ is durable, easy to adjust and can be used in a variety of applications where the length of the load bearing part needs to be adjusted.
It is designed to provide quick rigging using standard tools and the same time closed body design effectively protects the thread.
Compact, lightweight construction
Safe – Each rigging screw (except M6 & M8) is proof load tested 1,5 x WLL and CE-marked making them suitable for lifting operations.
Easy to adjust the length using standard tools
The adjusted length is securely locked by closing the two counter nuts
Durable all steel construction
All parts are hot dip galvanized for long service life (except M6 and M8 which are electro galvanized)
The closed body design protects the threads from damage and at the same time prevent dirt from entering into the center body
The jaws are equipped with safety bolts and nuts and stainless steel retaining pins
Safety bolts and nuts are additionally painted in blue and red for quick identification as POWERTEX original parts
Multilanguage user manuals included
Standard: Machinery directive 2006/42/EC
Marking: CE-marked, POWERTEX, batch number, WLL (except M6 and M8),Finish: Hot dip galvanized, except from M6 and M8, which are electro galvanized.Note: Avoid eccentric loading of the rigging screw. Apply the load straight/in-line.Warning: *M6 and *M8 not for lifting! Do not adjust the length under load when lifting.Safety factor: 5:1
Dee type shackle PDSP is a high quality shackle intended to be used in demanding environments.
It is supplied with screw pin for quick and easy opening/closing.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
The body is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including screw pins are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Screw pins are additionally painted in blue for quick and easy detection as original POWERTEX parts
Multilanguage user manuals
Material: Forged alloy steel, supplied with screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Screw pin additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6
Bow type shackle PBSB is a high quality shackle intended for use in demanding environments.
It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 3, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
Larger sizes equipped with arrows to indicate 45 degrees to vertical
Raised pad for dedicated and easy individual ID (3,25 t and up)
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including bolts and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Retaining pins made from stainless steel
Multilanguage user manuals
Material: Forged alloy steel, supplied with safety bolt and nuts. Stainless steel retaining pins.Marking: According to standard, CE-marked, POWERTEX (PX or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments.
It is supplied with screw pin for quick and easy opening/closing.
Blackline is suitable for use in the entertainment industry and in theatres where the dark surface gives little visual reflection.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
Blackline products are painted to give little visual reflection
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, POWERTEX (PT or PTEX) , WLL, CE, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: Up to 3/8”, matt black powder painted 1/2” and up, matt black electro galvanizedStandard: EN 13889 Safety factor: 6:1.
POWERTEX PSBS-S2 snatch block is a heavy-duty snatch block that can be used for temporary or permanent lifting and pulling installations. The block can be used to redirect a wire rope or to increase the load that the wire rope winch arrangement would be able to handle in a straight loading without block.
The wire rope is easily inserted by removing the hair needle pin, unwinding the quick bolt and turning the side plate.
Features:
Safe - Each snatch block is proof load tested 2 x WLL and examined in the factory prior delivery
Safe - The quick bolt is designed to be positively held in place also when the block is open
Safe - The swivel assembly is designed to be securely locked also when the block is open
Durable - forged/machined precision sheaves
Conical roller bearings (8t and up) or bronze bearings (2t and 4t)
2 grease nipples for quick maintenance of moveable parts
Hot dip galvanized shackle with safety bolt and nut
Sturdy side plates that protect the moveable parts
Identification plate made of metal instead of sticker
RFID equipped (chip) for easy service, inspection and asset control
Marked with QR code to allow access to user manuals at any time
2.2 Test certificate and Declaration of conformity delivered with each block
14 language user manuals delivered with each block
QR code for on-site access to multilanguage user manuals
Fulfills Machinery Directive 2006/42/EC
Material: Robust steel constructionMarking: CE-marked, POWERTEX, Model, WLL, Manufacturing date and Serial numberTemperature range: -20°C up to +50°CFinish: Red paintedSafety factor: 4:1
POWERTEX Wire rope grip PWRG is approved for lifting when assembly is made according to the user instructions.
It is designed to be used with 6 or 8 stranded steel wire rope with steel or fiber core with tensile strength up to 1960 N/mm2.
Correctly mounted the assembly will withstand 80% of the steel wire ropes minimum breaking strength.
Safe - The grips are designed to assure high friction between wire rope and grip
Quick and easy to use – Only 3 grips needed for safe assembly
Quick mounting thanks to the recessed bolt head seats that hold the bolt while tightening the nuts
Low maintenance thanks to galvanization of grips and Dacrotized bolt and nuts
Features: PWRG-4, 6, 8, 10 are drop forged. PWRG-12, 16, 20, 25, 35 are casted.Finish: Galvanized.Warning: Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope grips
Dee type shackle PDSB is a high quality shackle intended for use in demanding environments.
It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 3, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts are marked with batch number for traceability
The body is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including bolts and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Retaining pins made from stainless steel
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy safety bolt and nuts. Stainless steel retaining pinsMarking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1.Grade: 6
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments.
It is supplied with a screw pin for quick and easy opening.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and screw pins marked with batch number for traceability
Larger sizes equipped with arrows to indicate 45 degrees to vertical
Raised pad for dedicated and easy individual ID (3,25 t and up)
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including screw pins and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Screw pins are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Bolt additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6
Properties
Equipped with swivel hook.
Steel housing.
Side opening link permits quick, easy insertion of rope or cable without threading.
Sheave is made of high-quality steel with a groove.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Ropetex Heavy Duty Lube 70 is a medium thixotropic gel lubricant with stable properties over a wide temperature range. It offers excellent corrosion protection against
marine working conditions. Heavy Duty Lube 70 is formulated for long life on static or
dynamic ropes in highly aggressive environments. Additionally, it has a good wash-off
performance.
Typical applications: Offshore cranes, standing rigging, mooring ropes; tower ropes, outdoor winches.
Application methods: High pressure equipment or brushing
Minimum application temperature: -20°C
Color/texture: Glossy black gel.
NLGI Grade: NLG10
Hot salt spray test: 720 hours
4-ball weld load: > 180 kgf
Available in 12,5 kg pail.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -40°C up to +70°C
Ropetex Ultra Lube 2 is an ecofriendly, advanced high-performance hybrid grease.
It is developed to perform in dockside, offshore and deep-water environments.
Furthermore, it has superior wash-off performance and is bio-degradable,
non-toxic and non-bio accumulative.
Ropetex Ultra Lube 2 is an Environmentally Acceptable Lubricant (EAL) and is fully VGP
2013 compliant. It can therefore be used on docksides, riversides, lakes and other
environmental sensitive locations.
Due to the composition of the product, it is stable over a wide temperature range, making it suitable for tropical environments.
Typical applications: Offshore cranes, dockside cranes; offshore and harbor installations; subsea installations.
Application methods: High pressure equipment or brushing.
Minimum application temperature: -5°C (Product should be kept to at least 10°C for 48 hours before application).
Color/texture: Matte black grease
NLGI grade: NLG2
Drop point: 154°C
Break point: -60°C
Relative density: 0.9 - 0.95
Hot salt spray test: 2880 hours
4-ball weld load: > 400 kgf
4-ball weld scar: 0,55 mm
Water spray-off: < 60% retention
Environmentally Acceptable Lubricant: YES
VGP 2013 compliant: YES
Available in 12,5 kg pail.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -40°C up to +120°C
Ropetex Traction Lube 40 is a synthetic lubricant which coats wire surfaces with a slip-resistant film. It is designed for situations in which frictional grip is vital, because it provides internal lubrication whilst avoiding excessive build-up with repeated applications.
Typical applications: Lifts, elevators and traction hoists.
Application methods: Portable sprayer or brushing/dripping.
Minimum application temperature: -5°C (product should be kept to at least 10°C for 48 hours before application).
Color/texture: White water fluid.
NLGI Grade: Solvent liquid
4-ball weld load: > 110 kgf
Available in a 20 liter drum.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -55°C up to +40°C
Working principle: The deviation of the cable caused by the intervention of the sensor causes a tangential force that is proportional to the force exerted on the traction cable. In the event of an overload, a microswitch integrated in the sensor is pressed and stops. the electric wire rope hoist.
Technical specifications
Basic version: for cables from 4 to 35 mm.
Measuring sensor: integrated microswitch.
Installation: directly on the fixed part.
Sensor material: aluminum of aviation quality.
Surface treatment: colorless anodising.
Calibration system: by micrometric screw.
Switching voltage: max 220 VAC.
Switching current: max 5 Amp.
Accuracy: 5% of EM.
Operating temperature: from -30 ° to + 80 ° C.
Protection class: IP40.
Maintenance: none.
Connection: 3-wire electricity cable.
Electrical output: contact plug.
Length of cord: 2 meters, option 5 meters.
Application
This overload protection is specifically designed for overhead cranes with multiple parts.
Option
IP65.
Marking: CE-marked
Properties
Suitable both for manual and mechanical drive.
Maintenance-free design.
Sheave dimensions according to RZ-0,5 to RZ-5,0.
Steel stand.
A cable guide is provided on the support.
Self-lubricating bearings.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100
Properties
Suitable for hand and mechanical applications.
Maintenance-free design.
Steel.
Self-lubricating bearings
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Ropetex Thin Lube 30 is a semi-dry thin film lubricant that can be utilized in a wide range of applications, both in industry and construction. It has excellent penetration and
corrosion resisting properties. Thin Lube 30 also minimizes wear between the wires and
strands of a steel wire rope, and is therefore perfect for frequent use in harsh working
conditions. It also consists of components that reduce abrasive particle contamination,
the probability of lubricant ‘flinging off’ and a lubricant build-up
Typical applications: General industrial lifting, winch ropes, tower cranes, mobile cranes, dockside cranes and fishing ropes
Application methods: Portable sprayer or brushing/dripping.
Minimum application temperature: -5°C (product should be kept to at least 10°C for 48 hours before application).
Color/texture: Brown opaque fluid.
NLGI Grade: Solvent liquid
4-ball weld load: > 100 kgf
Available in 400 ml aerosol, 5 liter can and 20 liter can.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -30°C up to +60°C
General: Stainless Duplex wire rope clips for for general applications, with 2 screws.
Design: Pressed steel plate. Fixed screws.
Material: Stainless AISI 316.Finish: Polished.Warning: Not for lifting.
Turnbuckles are used for rigging or tensioning wires, ropes, rods etc. They are designed for in-line rigging, tensioning or lashing.
Standard: Generally to ASTM F1145-92 formerly U.S. Federal Specification FF-T-791b.
Certification: A works certificate, proof load test certificate and/or EC Declaration of Conformity can be supplied upon request.
Material: Drop forged high tensile steel SAE 1035 or 1045.Marking: CE-markedTemperature range: -20°C up to +200°CFinish: Hot dip galvanized.Safety factor: 5:1
CC04 is a one hand wire rope cutter for rope sizes up to 4 mm, CC12 up to 12 mm and CC18 up to 18 mm.
Note: The wire rope cutters are hand tolls. Only use with normal hand-power.