The POWERTEX Connecting Link C is part of the Powertex G10 Lifting Sling Chain Components range. It's a quick and cost-effective part for assembling chain slings. The locking spring is encapsulated in a protective steel bushing. Available for 6 mm up to 32 mm chain, and from WLL 1.4t up to WLL 40t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (C-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MAW (Wide) is part of the range of Powertex G10 Lifting Sling Chain Components. The MAW assembly features wider toplinks and sublinks, making it ideal for larger hooks and steel wire rope slings with thimble eyes. It serves as the top assembly for both three-leg and four-legged chain sling or steel wire rope sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 3t up to WLL 21.2t. All models are welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MAW-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MA is part of the range of Powertex G10 Lifting Sling Chain Components. The assembly MA is to be used as the top ring for three-leg and four-legged chain sling assemblies. Available for 6 mm up to 22 mm chain and from WLL 3t up to WLL 40t. All models are welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MA-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MC1 is part of the range of Powertex G10 Lifting Sling Chain Components. The MC1 assembly is made up of a master link and an integrated connector with a shortening hook. This convenient combination allows operators to easily adjust the assembly length according to the specific application requirements. Due to its integrated components, this part is more cost-efficient, user-friendly, and lightweight than traditional assemblies. The MC-1 is to be used for one leg chain sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 1,4t up to WLL 10t. All models have a welded master link and forged connector. Also available as MC2 for two-legged assemblies and MC4 for four-legged assemblies. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MC1-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MC4 is part of the range of Powertex G10 Lifting Sling Chain Components. The MC4 assembly is made up of a master link and two integrated connectors, each with two shortening hooks. This convenient combination allows operators to easily adjust the assembly lengths according to the specific application requirements. Due to its integrated components, this part is more cost-efficient, user-friendly, and lightweight than traditional assemblies. The MC-4 is to be used for four-legged chain sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 3t up to WLL 21,2t. All models have a welded master link and forged connectors. Also available as MC1 for one-leg assemblies and MC2 for two-legged assemblies. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MC4-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link M is part of the range of Powertex G10 Lifting Sling Chain Components. Master Link M is to be used as the top ring one-leg and two-legged chain sling assemblies. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 56t. All models up to M-3226-10 are forged. Model M-3632-10 is welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model(M-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are forged, except M-3632-10 which is weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link MX (Extra Large) is part of the range of Powertex G10 Lifting Sling Chain Components. The Master Link is extra large and can be fitted on crane hooks made according to DIN15401 no. 25 and DIN 15402 no. 32. Master Link MX is to be used as the top ring in one-legged chain sling assemblies. Available for 10 mm up to 20 mm chain and from WLL 4t up to WLL 16t. All models are forged. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MX-10-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: In order to mount C-10-10 to MX-10-10 one C-13-10 needs to be mounted as transition link.Safety factor: 4:1Grade: 10

Rema®'s Grade 6 Stainless Steel Chain Slings and components are meticulously crafted using top-tier stainless steel (AISI 316), our slings are not just durable but also versatile. With the availability of individual components, we ensure a sustainable and customizable solution tailored to your specific lifting requirements. Our stainless steel assemblies are trusted across a myriad of industries such as construction, food & beverage, healthcare, aerospace, marine, and beyond. Utilization Features: Durability: Made with premium AISI 316 stainless steel, ensuring longevity and resistance to corrosion. Versatility: Suitable for a range of lifting operations with various assembly options. Safety: Comes with a CE-mark and a safety factor of 4, ensuring utmost safety during operations. Adaptability: Individual component availability for a tailored lifting solution. Markets/Applications: Construction: Ideal for heavy-duty lifting and construction site operations. Food & Beverage: Stainless steel ensures hygiene and cleanliness, making it perfect for food-related lifting tasks. Medical: Suitable for lifting medical equipment and supplies. Aerospace: Can be used for lifting aerospace components. Marine: Resistant to corrosion, making it perfect for marine applications. Material: AISI 316Marking: According to standard, CE-markedStandard: EN 818-4 Safety factor: 4Grade: 6

Rema®'s Grade 6 Stainless Steel Chain Slings and components are meticulously crafted using top-tier stainless steel (AISI 316), our slings are not just durable but also versatile. With the availability of individual components, we ensure a sustainable and customizable solution tailored to your specific lifting requirements. Our stainless steel assemblies are trusted across a myriad of industries such as construction, food & beverage, healthcare, aerospace, marine, and beyond. Utilization Features: Durability: Made with premium AISI 316 stainless steel, ensuring longevity and resistance to corrosion. Versatility: Suitable for a range of lifting operations with various assembly options. Safety: Comes with a CE-mark and a safety factor of 4, ensuring utmost safety during operations. Adaptability: Individual component availability for a tailored lifting solution. Markets/Applications: Construction: Ideal for heavy-duty lifting and construction site operations. Food & Beverage: Stainless steel ensures hygiene and cleanliness, making it perfect for food-related lifting tasks. Medical: Suitable for lifting medical equipment and supplies. Aerospace: Can be used for lifting aerospace components. Marine: Resistant to corrosion, making it perfect for marine applications. Material: AISI 316Marking: According to standard, CE-markedStandard: EN 818-4 Safety factor: 4Grade: 6

Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 10

Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 10

Rema®'s Grade 6 Stainless Steel Chain Slings and components are meticulously crafted using top-tier stainless steel (AISI 316), our slings are not just durable but also versatile. With the availability of individual components, we ensure a sustainable and customizable solution tailored to your specific lifting requirements. Our stainless steel assemblies are trusted across a myriad of industries such as construction, food & beverage, healthcare, aerospace, marine, and beyond. Utilization Features: Durability: Made with premium AISI 316 stainless steel, ensuring longevity and resistance to corrosion. Versatility: Suitable for a range of lifting operations with various assembly options. Safety: Comes with a CE-mark and a safety factor of 4, ensuring utmost safety during operations. Adaptability: Individual component availability for a tailored lifting solution. Markets/Applications: Construction: Ideal for heavy-duty lifting and construction site operations. Food & Beverage: Stainless steel ensures hygiene and cleanliness, making it perfect for food-related lifting tasks. Medical: Suitable for lifting medical equipment and supplies. Aerospace: Can be used for lifting aerospace components. Marine: Resistant to corrosion, making it perfect for marine applications. Material: AISI 316Marking: According to standard, CE-markedStandard: EN 818-4 Safety factor: 4Grade: 6

Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 10

Material: Alloy steel.Marking: Code and grade.Finish: Painted.Warning: Not to be heat-treated.Safety factor: 4:1Grade: 10

Material: Alloy steel.Marking: Code and grade.Finish: Painted.Warning: Not to be heat-treated.Safety factor: 4:1.Grade: 10

General: For 2-leg slings with shortening element.Temperature range: -40 ºC up to 200 ºCSafety factor: 4:1Grade: 12

General: For 3 and 4-leg slings with shortening element. Temperature range: -40 ºC up to 200 ºCSafety factor: 4:1Grade: 12

Material: Alloy steel.Finish: Painted.Warning: Not to be heat-treated.Safety factor: 4:1Grade: 10

Stainless steel master link for 1- and 2-leg chainslings. A higher resistance to acids and caustics compared to the standard transition links G8, G10 and G12 is just one of the many benefits that make this stamped transition link truly remarkable. The use of high-grade stainless steel also ensures that this electrically welded transition and securing link will never rust. The transition link is part of welded assemblies, may also be used as an end link and is tested at 100 % of its maximum load capacity. Its dimensions are similar to DIN 5688‑1. The outstanding quality of this transition link is also reflected in its wide range of possible applications: It may be used as a connecting link for assembling I- to IV-leg assemblies in welded systems as well as an end link. In addition, it is ideally suited for use in water and wastewater applications and can also be used in connection with chemicals and food products; however, restrictions will apply. Material: 1.4404 (AISI 316L), 1.4462 (AISI 318LN).Marking: CE-markedFinish: Pickled and blasted.Safety factor: 4:1Grade: 6

Connecting link for: masterlink - chain, chain - chain, (eye)hook - chain. Material: Alloy steel.Marking: According to standard, CE-markedTemperature range: -40°C up to 380°CStandard: EN 1677-1 Note: Not to be heat-treated.Warning: For straight in-line pull only. Not to be heat-treated.Safety factor: 4:1Grade: 10

Superior weight distribution with longer lifespan. The newly developed load distributors not only conform to the requirements of a conventional load distributor, but also convince by being more effective at overall weight distribution. Due to its extremely flat design, this load distributor can be used in situations where the inclination angle is up to 60°. To improve the wear resistance of the newly developed load distributors, are produced by using Q&T steel. Should operational wear occur, the load distributor can be turned 180° – this increases the life cycle of the distributor and reduces the costs immensely. Experts value the 30% increase in carrying capacity with the same nominal diameter meaning that all four chain strands of a four-leg-sling carry the weight of the load simultaneously. Furthermore, it is possible to use a smaller dimension in order to save on weight without minimising the overall carrying capacity. Material: Alloy steel.Marking: Code, gradeSafety factor: 4:1Grade: 12

Master link with large inner diameter and length. These rings with auxiliaries have the dimensions that allow the manufacture of steel wire ropes slings with 3 or 4 legs. Material: Alloy steel — Quenched & TemperedMarking: According to standard, Manufacturers name, traceability code.Standard: EN 1677-4 Safety factor: 5:1Grade: 8

Material: Alloy steel.Marking: According to standard, CE-marked, code and grade.Finish: Painted.Standard: EN 1677-4 Safety factor: 4:1Grade: 10

Master link with shortening hook/link. Material: Alloy steel.Marking: Code and grade.Finish: Painted.Warning: Not to be heat-treated.Safety factor: 4:1Grade: 10