Lifting beams and coil hooks are individually developed by our designers for your application. Of course, we also offer standard lifting beams. Our load handling devices meet the highest demands and offer the optimal solution for your lifting application.
Properties
Make a mobile crane of your fork-lift truck.
Screw clamps on the forks for safety.
Included swivel hook (Grade 8).
IMPORTANT
Do not exceed the capacity of the forklift truck.
Pay attention to the load's centre of gravity.
Prevent wobbling of the load during transport.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 , EN 1677-1
Properties
4 welded hooks (Grade 8) for stable suspension.
Surface finish: RAL 2004 (orange).
Capacity range labelling.
Black-and-yellow safety markings at beam ends.
Hooks equipped with safety latches.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 , EN 1677-1
Properties
4 hooks for stable suspension.
Capacity range labelling.
Hooks equipped with safety latches.
Material: Stainless steel, AISI 316.Marking: According to standard, CE-markedStandard: EN 1677-1 , EN 13155 , EN 12100
Properties
Surface finish: zinc phosphate primer RAL 2004 (orange).
Capacity range labelling.
Black-and-yellow safetymarkings at beam ends.
Hooks equipped with safety latches.
High quality steel hooks grade 10.
Option
Sandblasting and painting in every RAL color.
Higher load capacity and bigger dimensions on request.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 , EN 1677-1
Properties
Surface finish: zinc phosphate primer RAL 2004 (orange).
Capacity range labelling.
Black-and-yellow safetymarkings at beam ends.
Hooks equipped with safetylatches.
High quality steel hooks grade 10.
Option
Sandblasting and painting in every RAL color.
Higher load capacity and bigger dimensions on request.
Marking: According to standard, CE-markedStandard: EN 1677-1 , EN 12100 , EN 13155
The lifting beam of the T-K-SB series has a 2-strand chain suspension for single hooks according to DIN 15401 on the crane side and rigid shackle plates on the load side. The matching shackles are included in the scope of delivery. You are able to expand the lifting beam with additional equipment from our web shop. The lifting beam is supplied in the standard color RAL 3000 (flame red), other colors are also possible on request.
For other intermediate sizes and load capacities, you can also send us an inquiry.
Material: Construction steelMarking: According to standard, CE-markedTemperature range: -20°C up to +100°C Finish: RAL 3000 (red flame)Standard: EN 13155
The lifting beam of the T-K-SL series has a 2-strand chain suspension for single hooks according to DIN 15401 on the crane side and shackle bars on the load side. The matching shackles are included in the scope of delivery. You are able to expand the lifting beam with additional equipment from our web shop. The lifting beam is supplied in the standard color RAL 3000 (flame red), other colors are also possible on request.
For other intermediate sizes and load capacities, you can also send us an inquiry.
Material: Construction steelMarking: According to standard, CE-markedTemperature range: -20 °C up to +100 °C Finish: RAL 3000 (red flame)Standard: EN 13155
General: The lifting triangle has the same function as a short beam or a spreader. Given working load limits are valid for a maximum top sling angle of 90°. For top angles between 90°-120° working load limit shall be reduced by 30%. All lifting triangles are supplied with 2 shackles according to table. Working load limit in the centre shackle hole is equal to the working load limit of the shackle according to the table.
Design: Cut sheet metal. Wear plates and spacers for the shackles.
Proof: Batch proof 2 x WLL.
Material: Plate of high-strength structural steel.Marking: WLL and CE-marking.Finish: Yellow painted.Note: Other loads and dimensions are available on request.
The lifting beam of the T-K-VR series has a 2-strand chain suspension for single hooks according to DIN 15401 on the crane side and adjustable lifting frames on the load side. The matching shackles are included in the scope of delivery. You are able to expand the lifting beam with additional equipment from our web shop. The lifting beam is supplied in the standard color RAL 3000 (flame red), other colors are also possible on request.
For other intermediate sizes and load capacities, you can also send us an inquiry.
Material: Construction steelMarking: According to standard, CE-markedTemperature range: -20°C up to +100°C Finish: RAL 3000 (flame red)Standard: EN 13155
General: Demountable lifting beams in aluminium. The beams are easily assembled and disassembled. Each beam is delivered in its entirety. The beams can be provided with other accessories such as hooks, wire rope slings, chain slings or textile slings.
Design: Aluminium spacers for light weight. The corners can be fixated to two of the spacers for easy assembly/disassembly.
Proof: 2 x WLL according to EN 131 55
Marking: According to Machinery Directive 2006/42/EGFinish: Steel details are galvanized, no other surface treatment is made.Note: Smaller sizes are made upon request. Short side must always be 80% of the long side.
The spreaders have a high point of oscillation which results in good balance. Adjustable to adapt to goods with different lengths between the connection points and a compact size for transport. Each spreader is delivered complete with 2-leg sling (wire rope, chain och synthetic) and shackles. The spreader can be equipped with other accessories such as hooks on request.
Design: Welded aluminum construction that provides low weight.
Proof: 2 x WLL according to EN 131 55.
Marking: CE-marked, according to Machinery Directive 2006/42/EGFinish: Details of steel are galvanized otherwise no surface treatment
General: Coil hook for lifting and handling of coils and similar loads with a center of gravity below the tine while transport.Design: Lifting eye, handle, rounded tine, counterweight (only for positioning the empty coil hook to improve balancing and positioning).
Note: The center of gravity of the coil must always be below the crane hook slightly toward the back of the coil hook. The tine tip will face upwards (ideally approx. 3°) to achieve an acceptable
The lifting beam of the T-A-SB series has an eye suspension for single hooks according to DIN 15401 on the crane side and rigid shackle plates on the load side. The matching shackles are included in the scope of delivery. You are able to expand the lifting beam with additional equipment from our webshop. The lifting beam is supplied in the standard color RAL 3000 (flame red), other colors are also possible on request.
For other intermediate sizes and load capacities, you can also send us an inquiry!
Material: Construction steelMarking: According to standard, CE-markedTemperature range: -20°C up to +100°C Finish: RAL 3000 (flame red).Standard: EN 13155
Low profile lifting beam for handling big bags with four lifting eyes. Fits most bags with the measurements of 75x75 cm to 105x105 cm in the bottom.
Design: The attachment points of the bag´s liftingeyes are leveled with the lifting point of the beam - see drawing. The attachment points are extra thick and round to protect the lifting eyes of the big bag and are also designed to prevent the bag from sliding.
Proof: Batch proof 2 x WLL.
Material: Plate of high-strength structural steel.Marking: WLL and CE marking.Finish: Yellow electroplated.Note: Special design lifting beams with negative lifting height for other dimensions of big bags and loads are also manufactured. We also manufacture lifting beams/spreader for simultaneous handling.
Modulift Modular Spreader Beam - MOD 6
The standard range
Modular spreader beams provide the ideal solution for most lifting requirements – versatile and cost-effective. Modulift MOD 6 is available with capacity up to 6 t at 3.6 m and up to 4.5 m at a lower capacity.
Click here to see the load v span chart for the standard range
The modular configuration and interchangeable components enable Modulift spreaders to be reused over many lifts. Designed by Modulifts engineering experts and manufactured in their own specialist facilities; the Modulift range are the leading modular spreader beams on the market.
How the spreader beam is configured
Every Modulift modular spreader beam consists of a pair of end units and a pair of drop links, with interchangeable struts that can be bolted into the assembly between the end units to either lengthen or shorten the beam to suit the requirements of the lift, making them reusable at different spans. The different components are shown in the table below. If you need help to configure your spreader beam, please contact us.
General: Low profile lifting beam for minimum head room. The table only shows a few examples of available sizes and provide an indications of dimensions, loads and weights. Other lengths and working loads can be manufactured to suit customer requirements. All beams are supplied complete with shackles according to the table. The beams can be provided with other accessories such as hooks, wire rope slings, chain slings or textile slings. Please also refer to our description in the introduction to this section on lifting beams. Design: Lightweight welded beam construction providing good torsional stiffness.Proof: 1,5 x WLL.Material: Beam and plate of high-strength structural steel.Marking: Working load limit and CE marking.Finish: Yellow painted.Note: Also manufactured with plates and/or excavator hooks in the ends.
General: Low profile lifting beam for minimum head room. The table only shows a few examples of available sizes and provide an indications of dimensions, loads and weights. Other lengths and working loads can be manufactured to suit customer requirements. All beams are supplied complete with shackles according to the table. The beams can be provided with other accessories such as hooks, wire rope slings, chain slings or textile slings. Please also refer to our description in the introduction to this section on lifting beams. Design: Lightweight welded beam construction providing good torsional stiffness.Proof: 1,5 x WLL.Material: Beam and plate of high-strength structural steel.Marking: Working load limit and CE marking.Finish: Yellow painted.Note: Also manufactured with plates and/or excavator hooks in the ends.
This type of lifting beam functions primarily as a spreader beam meaning that a 2-part sling must be used between the crane hook and the lifting beam. The lifting beam is designed with 2x3 attachment points, which makes it possible to have several different types of attachments mounted on the lifting beam at the same time. Other lengths and working loads can be manufactured upon request.
Design: Lightweight welded pipe beam construction providing good torsional stiffness.
Proof load: Usually 1,5 x WLL.
Marking: Working load limit (WLL), CE marking, manufacturer, serial number, year of manufacturing, etc.Finish: Yellow painted. Other treatments available on request.Note: Top sling, separate slings and other accessories to be ordered separately.
This type of coil hook is designed for lifting and handling of steel coils or other heavy materials. The suspension eye is placed at the centre of gravity meaning that the coil hook will always be in balance with or without load. If used correctly the coil hook will never tilt forward therefor eliminating the risk of unintended loss of the coil.
Coil hooks type CH are available in various sizes with a permissible load range from 5.000 kg to 30.000 kg.
Design: Lightweight welded beam construction providing good torsional stiffness.
Proof load: Usually 1,5 x WLL.
Material: Beam and plate of high-strength structural steel.Marking: Working load limit (WLL), CE marking, manufacturer, serial number, year of manufacturing, etc.Finish: Yellow painted. Other treatments available on request.
The lifting beam of the T-A-VR series has an eye suspension for single hooks according to DIN 15401 on the crane side and adjustable lifting frames on the load side. The matching shackles are included in the scope of delivery. You are able to expand the lifting beam with additional equipment from our web shop. The lifting beam is supplied in the standard color RAL 3000 (flame red), other colors are also possible on request.
For other intermediate sizes and load capacities, you can also send us an inquiry.
Material: Construction steelMarking: According to standard, CE-markedTemperature range: -20°C up to +100°C Finish: RAL 3000 (flame red)Standard: EN 13155
General: Low profile lifting beam for minimum head room. The table only shows a few examples of available sizes and provide an indications of dimensions, loads and weights. Other lengths and working loads can be manufactured to suit customer requirements. All beams are supplied complete with shackles according to the table. The beams can be provided with other accessories such as hooks, wire rope slings, chain slings or textile slings. Please also refer to our description in the introduction to this section on lifting beams. Design: Lightweight welded beam construction providing good torsional stiffness.Proof: 1,5 x WLL.Material: Beam and plate of high-strength structural steel.Marking: Working load limit and CE marking.Finish: Yellow painted.Note: Also manufactured with plates and/or excavator hooks in the ends.
Modulift Modular Spreader Beam - MOD 24
The standard range
Modular spreader beams provide the ideal solution for most lifting requirements – versatile and cost-effective. Modulift MOD 24 is available with capacity up to 24 t at 5 m and up to 6.5 m at a lower capacity.
Click here to see the load v span chart for the standard range.
The modular configuration and interchangeable components enable Modulift spreaders to be reused over many lifts. Designed by Modulifts engineering experts and manufactured in their own specialist facilities; the Modulift range are the leading modular spreader beams on the market.
How the spreader beam is configured
Every Modulift modular spreader beam consists of a pair of end units and a pair of drop links, with interchangeable struts that can be bolted into the assembly between the end units to either lengthen or shorten the beam to suit the requirements of the lift, making them reusable at different spans. The different components are shown in the table below. If you need help to configure your spreader beam, please contact us.
Load monitoring with Active Link
The innovative Active Link provides wireless real time data by measuring the load at either end of the spreader beam and is ideal for both weighing and dynamic load monitoring. Data is transmitted wirelessly to a USB transceiver that must be connected to a Windows computer or tablet with a spare USB port. The Active Link, which replaces the standard drop link component, offers myriad time, cost and weight advantages.
Lifting beam with low headroom to be used where the lifting height is limited. No adjusting possibilities and designed for direct attachment with the crane hook in the central lifting eye. The lifting beam is designed with one attachment point in each end. Other lengths and working loads can be manufactured upon request.
Design: Lightweight welded beam construction providing good torsional stiffness.
Proof load: Usually 1,5 x WLL.
Material: Beam and plate of high-strength structural steel.Marking: Working load limit (WLL), CE marking, manufacturer, serial number, year of manufacturing, etc.Finish: Yellow painted. Other treatments available on request.Note: Top sling, separate slings and other accessories to be ordered separately.