POWERTEX PCB-S2OLP Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. The OLP hoists are factory equipped with Overload Protection device, which limits the maximum operating force that can be applied using the hand chain. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction. Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Option: Chain bag Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Chain Block POWERTEX Blackline PCB-S2 is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. The hoist is powder coated in matt black, and mounted with a black chain, which makes it perfect for use on stages and in the amusement industry. The hoist is in a compact, lightweight construction. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Option: Chain bag Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated body in matt black and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX PPT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails. The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams). The trolley can easily be positioned along the beam by pushing or pulling thanks to high quality steel wheels with bearings. Features: Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL Mechanical stops integrated in the design to prevent derailing Equipped with connection plate with eye to hoist’s upper hook or direct connection Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye Rubber bumpers to absorb shock loads on impact to rail ending Equipped with RFID for quick registration and maintenance Marked with QR code to allow access to user manuals at any time PPT-S2 is easy to mount and dismount on a horizontal rail or beam The 3 piece design makes installation quick and ergonomically The shaft is easily locked using the lock plate (No need to use large castle nut nor collar pins) Wheel shafts are robotic welded for high quality weld seams Large steel wheels equipped with double sided sealed bearings that do not need maintenance Powder painted side panels gives a nice lasting finish Fits most types of beam profiles and most brands of lifting blocks and electric hoists Longer shafts for wider beams can be supplied from stock in EU Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate. Blackline BT products are suitable to be used in theatres and entertainment industry. Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1

POWERTEX Chain bags are durable and designed to be easily mounted to chain blocks. They can contain up to 10 meter of chains. Universal - Fits many brands and models of chain hoists in the market Easy to mount without dismantling the hoist Comes in two different sizes The chain bags can be combined with POWERTEX Chain Block – both Blackline BK and standard S1 and S2 versions. Blackline BK products are suitable to be used in theatres and entertainment industry. Material: PVC-coated canvas, steel frame/holding pillars.Finish: Black.

POWERTEX Aluminum wire rope hoist PAPH-S1 is a compact and lightweight hoist that can be used for lifting, pulling and tightening offering very long lifting heights. It works with a steel wire rope running through the jaws of the hoist with a pulling speed of app. 3 m/min. The double sets of jaws open in turns so that the wire rope will always stay tight during the lifting/lowering operation. 20 m coiled steel wire rope with latch hook is included. Features: Safe – Each hoist is dynamic proof load tested 1,25 x WLL before leaving the factory. Compact, lightweight construction with aluminum covers. Durable construction with powder coated finish and plated frame components. Equipped with replaceable shear safety pin that prevents overloading (5 spare pins included). Equipped with rubber protection at the top opening preventing dirt from entering the hoist. Carrying handle for easy transportation and handling. 20 m coiled steel wire rope with latch hook is included and other lengths can be offered. Hooks are designed to open at overload instead of breaking. Hooks fitted with heavy duty steel safety latches. RFID equipped (chip) for easy service and inspection. QR code for on-site access to Multilanguage user manual. Test certificate and Declaration of Conformity enclosed with each hoist. 14 language User manual enclosed with each hoist. Spare parts available. Material: Durable aluminium/steel construction, Rubber handleMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Wire rope type, Serial number, User manual/QR code.Temperature range:  -10°C up to +50°CFinish: White powder coated body, plated steel parts and galvanized wire rope / hook.Standard: EN 13157 , EN 13414-1 Note: Only original rope can be used with the hoist!Safety factor: 4:1

POWERTEX PCB-S2 Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction. Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Option: Chain bag Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX Permanent lifting magnets PLM are very strong, durable and easy to use. The lifting magnets are designed to be versatile and can be used to attach to both flat and circular objects. They need limited maintenance and are designed to keep the lifting capacity over a long lifetime. The PLM magnets are very powerful compared to their dimensions and are light in weight. Features: Safe - each lifting magnet is proof load tested to 3,5 x WLL and inspected before leaving the factory High quality powerful Neodynium permanent magnets inside Light weight Designed to lift on both flat and circular surfaces Very high safety factor 3,5 (EN 13155 require SF 3) The increased safety factor increase life time and assures that standard safety factor 3 can be met also after annual check Strong and durable powder painted steel housing with machined connection surface Wear and corrosion resistant Chrome plated shackle as top connection Handle is equipped with a positive locking device and double locking for extra safety RFID equipped (chip) for easy registration, service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each lifting magnet Spare parts available Material: High quality magnetic material in strong and solid housingMarking: According to standard, CE-marked, POWERTEX, model, WLL, individual serial number, manufacturing date, QR code, capacity chart and equipped with a warning tag.Temperature range: -40°C – +80°C.Finish: Red powder painted housing and Chrome plated shackleStandard: EN 13155 Note: Max. lifting capacity is based upon lifting clean, flat, low-carbon steel plate with the full area of the magnet’s pole area in contact with the load.Safety factor: 3,5:1.

POWERTEX Beam Clamp PBC-S1 is durable and easy to install on different beam types. The beam clamp is designed to provide quick rigging and hoisting points for a great variety of applications. Features: Safe - All POWERTEX Beam Clamps are proof load tested 2 x WLL Compact, lightweight construction Low headroom design Durable all steel construction with powder coated finish and black plated spindle and grip RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each beam clamp Can be turned into Blackline version by adhering the included grey label over the shiny nameplate Blackline products are suitable for use in theatres and the entertainment industry. Marking: According to standard, CE-marked, POWERTEX, Model, WLL, Serial number, QR code Temperature range: -10°C up to +50°C.Finish: Black powder coating.Standard: EN 13155 Safety factor: 4:1.

POWERTEX Geared Trolley PGT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails. The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams). The trolley can easily be positioned along the beam using the hand chain thanks to high quality steel wheels with bearings. Features: Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL Mechanical stops integrated in the design to prevent derailing Equipped with connection plate with eye to hoist’s upper hook or direct connection Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye Rubber bumpers to absorb shock loads on impact to rail ending Equipped with RFID for quick registration and maintenance Marked with QR code to allow access to User manuals at any time PGT-S2 is easy to mount and dismount on a horizontal rail or beam The 3 piece design makes installation quick and ergonomically The shaft is easily locked using the Lock plate (No need to use large castle nut nor collar pins) Wheel shafts are robotic welded for high quality weld seams Large steel wheels equipped with double sided sealed bearings that do not need maintenance Powder painted side panels gives a nice lasting finish Fits most types of beam profiles and most brands of lifting blocks and electric hoists Longer shafts for wider beams can be supplied from stock in EU Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate Option: Black painted hand chain instead of galvanized hand chain  Blackline BT products are suitable to be used in theatres and entertainment industry. Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1

POWERTEX PRJ- S2 Mechanical rack jacks are easy and safe to operate as lifting can be made from the head or claw (same capacity). This jack model is suitable for working in both vertical and horizontal position. Features: Safe - each jack is proof load tested 1,25 x WLL and inspected before delivery from the factory Very stable thanks to the large ground plate Equipped with double brake pawls Durable – all steel housing that protects the mechanical parts inside Durable - mechanical parts made from quenched and tempered alloy steel The crank handle is foldable and equipped with ergonomic handle grip Strong powder coating (Chromium 6 free) RFID equipped (chip) for easy service, inspection and asset control 2.2 test certificate and Declaration of conformity delivered with each jack 14 language User manuals delivered with each hoist QR code for on-site access to Multilanguage user manuals Fulfills Machinery Directive 2006/42/EC Material: Robust all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Manufacturing date and Serial numberTemperature range: -20°C up to +50°CFinish: Powder coatedStandard: EN 1494

Extremely small and lightweight aluminum chain block. It weighs only approximately 50% of a similar standard chain block. The block can be used for lifting as well as pulling. The hoists are factory equipped with overload protection device (OLP), which limits the maximum operating force that can be applied using the hand chain. Features: Safe - Each block is dynamic proof load tested 1,5 x WLL before leaving the factor Compact, lightweight construction with aluminum covers Durable construction with powder coated finish and plated frame parts Chain block is chromium 6 free Sealed bearings on the chain wheel maximize efficiency and serviceability. Sprocket wheel surface treated against wear and corrosion Safe and well covered automatic load reaction break Equipped with double brake pawls Fine calibrated European made load chain for smooth operation Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist 14 language User Manual enclosed with each hoist Spare parts available Material: Durable aluminium/steel constructionMarking: According to standard, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1

PTJ-S1 is easy to operate using the detachable handle. The jack can lift using the toe of the jack or from the top plate and the capacity is the same for both lifting points. Features: • Safe - Each hydraulic jack is dynamic proof load tested using load of 1 x WLL throughout a full travel cycle and examined before delivery. • Safe – the jack is equipped with overload protection device • Housing allows 360 degree rotation for easy positioning • Pressure relief valve operated by turning knob • Adjustable lowering speed using the turning knob for smooth lowering • Chromium 6 free surface treatment • Equipped with RFID chip • POWERTEX 2.2 certificate & EC Declaration delivered with each jack • 14 language User manuals delivered with each jack • QR code for on-site access to Multilanguage user manuals • Fulfills Machinery Directive 2006/42/EC • Low height allows easy positioning under machines Material: Robust all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Manufacturing date and Serial numberTemperature range: -20°C up to +50°CFinish: Powder paintedStandard: EN 1494

Extremely small and lightweight aluminum lever hoist. It weighs only approximately 50% of a similar standard lever hoist. The hoist can be used for lifting as well as pulling. 250 kg-750 kg hoists are delivered with a handy carrying/belt bag. Features: Safe - Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction with aluminum covers Durable construction with powder coated finish and plated frame parts Lever hoist is chromium 6 free Sealed bearings inside maximize efficiency and serviceability. Sprocket wheel surface treated against wear and corrosion Safe and well covered automatic load reaction break Equipped with double brake pawls Fine calibrated European made load chain for smooth operation Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist 14 language User manual enclosed with each hoist Spare parts available Material: Durable aluminium/steel construction, rubber handleMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX PLH-S2 Lever Hoist is a hoist of high quality which is durable and easy to operate using the ergonomic rachet lever. Compact, lightweight construction. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Material: Durable all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL,  Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated finish and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Extremely small and lightweight aluminum chain block. It weighs only approximately 50% of a similar standard chain block. The block can be used for lifting as well as pulling. Features: Safe - Each block is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction with aluminum covers Durable construction with powder coated finish and plated frame parts Chain block is chromium 6 free Sealed bearings on the chain wheel maximize efficiency and serviceability. Sprocket wheel surface treated against wear and corrosion Safe and well covered automatic load reaction break Equipped with double brake pawls Fine calibrated European made load chain for smooth operation Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID (chip) equipped for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist 14 language User Manual enclosed with each hoist Spare parts available Material: Durable aluminium/steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range:  -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1

POWERTEX PLH-S2OLP Lever Hoist is a hoist of high quality which is durable and easy to operate using the ergonomic ratchet lever. The OLP hoists are factory equipped with Overload Protection device, which limits the maximum operating force that can be applied using the ratchet handle. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Material: Durable all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated finish and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Adjustable spindle beam clamp for establishing a semi-permanent suspension point when loading at an angle. Properties Compact design and low tare weight. Easy mounting. Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100

Properties Safety crank with foldable handle. Type VHS standard model Type VHS-R with Ratchet crank Type KBH short model Type KBH-R short model with ratchet crank. Marking: According to standard, CE-markedStandard: DIN-EN 7355 , EN 13157 , EN 12100

Properties Load capacity on pawl 4000 kg Load capacity on head 5000 kg Double lifting heights Overload prevention 2 lifting speeds normal or fast; with or without load. Marking: According to standard, CE-markedStandard: EN 12100 , EN 1494

Properties Load pressure brake. Adjustable crank length; backwind-free. Drums and axes run on needle bearings. Models above load capacity of 2 kg have two speeds, which is operated by changing the crank over. Paint finish and enamel varnish are standard. Standard delivery Does not include wire rope. Option Steel wire rope on request. Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100

The Elephant ALCMS 400 V electric chain hoists are compact and assembled with an electric trolley. Wide availability due to the high duty cycle in combination with a high hoisting speed. Properties Slip clutch against overload. Self-locking brake that holds the load at any desired height. In case of overload, the hooks will gradually bend and do not suddenly break off. Galvanized load chain, class DAT (Grade 8). Technical specification chain hoist Insulation class E. FEM 9.511 motor: 2m. Power supply 400VAC - 50Hz. Protection class IP54. Technical specification trolley Travel speed trolley 10 m / min Trolley flange width 75-125 mm. Protection class IP54 Motor power 0.4 kW Operating voltage 400V - 50Hz Standard delivery 3 m lifting height (maximum distance between top and bottom hook). 1.8 m control cable. 24V pendant control station. 4 m power cable. Plastic chain bucket up to 6 m chain, from 6 m chain bag. Included electric trolley. Option Other hoisting and operating height is also possible. Larger chain bag > 3 m. Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7

Series SR 230 V electric chain hoists are available in several designs and they have the same advantages as standard 400V models i.e. safety slip clutch/brake assembly, low construc-tional height etc. For the 1-phase connection, wire having a minimum cross-section of 2.5 mm². For power distribution at building sites, use connection cables of as short as possible to minimize voltage drop. Properties 230VAC, 1 phase, 50Hz, connection is to made using a wire of at least 2.5 mm². 24VAC control voltage including limit switch up and down. Advanced motors having high thermal load capacities. Long switch-on periods to facilitate high lifting height. Maximum safety due to the patented slip clutch/brake assembly. The brake holds loads at any desired height. At the top and bottom hook positions, switch-off at limit points is ensured byu a slip clutch. Mounted with a fixed suspension or combined with a hand-driven trolley. Load chain (grade 8 in compliance with EN 818/7). Standard delivery 3 m lifting height (maximum distance between top and bottom hook). 1.8 m control cable with push-buttons 24VAC Includes limit switches. 1 m power cable. Chain bag. Trolley not included. Option Any other hoisting and operating height is also possible. Larger chain bag. Radio remote control. Thermal protection against electrical overload. Pushing or electric trolleys. Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7

Lifting clamps for safely transporting steel plates in vertical position.   Properties Equipped with standard lifting eye, movable in one direction. Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. WLL and size of the jaw opening are clearly indicated on the clamp. Safety factor of at least 5 x WLL. Each clamp is 2x WLL testloaded. Application For lifting steel plates up to a hardness of 50 RC (485 HB). Suitable for lifting, 180 ° turning and vertical transport of steel plates. Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: Minimum weight to be lifted is 10% of the safe workload.Safety factor: 5

Model Rema® YA lever hoist is a robust lever hoist suitable for lifting, pulling, spanning and clamping in any directions. Properties Grade 10 Galvanized load chain with high tensile strength (EN 818/7). Compact construction and very low self-weight. Reliable self-locked brake which will retain the load at every required height. Hooks provided with safety latches. In case of overload, the hooks will gradually bend and do not suddenly break off. Patented guide for the load chain. A double spring on each catch for additional safety. Standard delivery 1,5 m lifting height (max distance between top and bottom hookpositions). Option Available in other lifting heights. Marking: According to standard, CE-markedStandard: EN 818-7 , EN 13157