Lifting Eye TP
0.00 €*
WLL:
0.5
The eyes can be loaded in all directions. All the eyes are pivoted to avoid breakage in the eyes, which also make it possible to fold it aside when it is not in use. Furthermore it has a ball beared swivel which makes the lifting eye to always stand in the correct direction to the load.
Material: Eye and swivel of alloy steelMarking: CE-marked, WLL.Finish: Painted.Note: The surface that the lifting eyes shall be attatched to shall be flat and tolerate the load it is going to be exposed to.Safety factor: 4:1
Lifting Eye Theipa Point - F
124.68 €*
WLL:
0.5
The eyes can be loaded with working load limit in all directions. All the eyes are pivoted to avoid breakage in the eyes, which also make it possible to fold it aside when it is not in use. Furthermore it has a ball beared sviwel which makes the lifting eye to always stand in the correct direction to the load.
The advantages:
The stamped WLL applies to the kind of attachment by 90°.
Bolts of the quality class 10.9 crack-tested are permitted as connecting elements
Different threaded versions and lengths can be supplied on request.
Material: Eye and swivel of alloyMarking: WLL.Finish: Painted.Safety factor: 4:1
Lifting Eye TAPG/TAPG-S
27.39 €*
WLL:
3.15
The eyes can be loaded with working load limit in all directions. All the eyes are pivoted to avoid breakage in the eyes, which also make it possible to fold it aside when it is not used.
Model TAPG: Lifting D-Ring and Bridge - without Screws.
Model TAPG-S: Lifting D-ring, bridge and 2 screws 8.8 EN 24014 (DIN 931)
Attachment-point, bolt-on type, in working
load limits of 3 - 8 t.
Features:
Compact design
Secured four times against breakage
Working range 120°
Bolt on plate also serves as marking stencil
The D-link must be able to move freely. The load take-up may not be supported on edges or on the sling point.
Material: Eye of alloy steel.Marking: WLL.Note: The surface that the lifting eyes shall be attatched to shall be flat and tolerate the load it is going to be exposed to.Warning: Only screws with a minimum strength class of 8.8 EN 24014 (DIN 931) may be usedSafety factor: 4:1
Hook for Multi Bucket System Vehicles
215.38 €*
WLL:
6.7
Hooks for multi bucket systems for chain slings.
Safety factor: 4:1Grade: 10
Variants from 216.11 €*