Lifting clamps
Beam Clamp POWERTEX PBC-S1
66.64 €*
WLL:
1
POWERTEX Beam Clamp PBC-S1 is durable and easy to install on different beam types. The beam clamp is designed to provide quick rigging and hoisting points for a great variety of applications.
Features:
Safe - All POWERTEX Beam Clamps are proof load tested 2 x WLL
Compact, lightweight construction
Low headroom design
Durable all steel construction with powder coated finish and black plated spindle and grip
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each beam clamp
Can be turned into Blackline version by adhering the included grey label over the shiny nameplate
Blackline products are suitable for use in theatres and the entertainment industry.
Marking: According to standard, CE-marked, POWERTEX, Model, WLL, Serial number, QR code Temperature range: -10°C up to +50°C.Finish: Black powder coating.Standard: EN 13155 Safety factor: 4:1.
Variants from 68.79 €*
CU universal plate lifting clamps
427.83 €*
WLL:
0.75
Lifting clamps for safely transporting steel plates in vertical position.
Properties
Equipped with universal lifting eye, movable in two directions.
Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
WLL and size of the jaw opening are clearly indicated on the clamp.
Safety factor of at least 5 x WLL.
Each clamp is 2x WLL testloaded.
Application
For lifting steel plates up to a hardness of 37 RC (345 HB).
Suitable for lifting, 180 ° turning and vertical transport of steel plates.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Note: Minimum weight to be lifted is 10% of the safe workload.
REMA RMBC Beam clamp
202.70 €*
WLL:
2
Adjustable spindle beam clamp for establishing a semi-permanent suspension point.
Properties
Compact design and low own weight.
Easy mounting.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Safety factor: 4
CNMH horizontal lifting clamp
940.67 €*
WLL:
1
REMA horizontal clamps are for the safe transport of flat sheets where the surface may not be damaged eg stainless steel, aluminum, wood etc. The clamp and bed of the clamp are covered with a high-quality pressure-resistant plastic.
Application
For the horizontal transport of stainless steel plates, various wooden panels, aluminum etc.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100
Superclamp R1 and R2
625.85 €*
WLL:
3
Developed for standard rail sections, the ‘SUPERCLAMP’ rail lifting clamp provides a reliable and secure grip on the rail when tightened.
Its light weight, versatile adjustability and low maintenance requirements makes this ‘SUPERCLAMP’ product a popular unit for all engaged in rail construction, rail maintenance and rail manufacture.
Properties
For rail-laying, rail maintenance and rail manufacturing
Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100
CBL bulb lifting clamp with extra large jaw opening
1,408.92 €*
WLL:
1.5
Properties
Standard with 3 pivots for extra powerful clamping force.
Clamp is locked in closed as well as open position.
Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
Application
For vertical lifting, handling and transporting of Holland Profile (HP) shipbuilding structures, steel plates and structures.
Adjustable jaw opening available from: 0 to 155 mm.
Lifting of longer sections should be performed with a spreader beam fitted with multiple clamps.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155
CBKN block lifting clamps
1,347.60 €*
WLL:
0.5
Properties
2 special synthetic anti-friction pads to guarantee non-marking.
Lightweight design and easy to use.
Tough quality heavy duty body.
Maintenance-friendly, easy to exchange parts which are available upon request.
Application
For vertical lifting and transporting of all plates, blocks and structures with parallel sides without marking, scratching and or damaging the material surface.
Perfect for lifting materials such as (stainless) steel, aluminum, nature stone, composite, painted materials, wood, glass, plastic, etc.
The clamp is locked in the open position.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Warning: The surface roughness of the material to be hoisted must have a minimum roughness of 25 µm or more rough.
CS vertical plate lifting clamps
335.86 €*
WLL:
0.75
Lifting clamps for safely transporting steel plates in vertical position.
Properties
Equipped with standard lifting eye, movable in one direction.
Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
WLL and size of the jaw opening are clearly indicated on the clamp.
Safety factor of at least 5 x WLL.
Each clamp is 2x WLL testloaded.
Application
For lifting steel plates up to a hardness of 37 RC (345 HB).
Suitable for lifting, 180 ° turning and vertical transport of steel plates.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: Minimum weight to be lifted is 10% of the safe workload.Safety factor: 5
CHV horizontal adjustable lifting clamps
2,061.12 €*
WLL:
1.5
Adjustable lifting clamp for safe lifting and moving of packages and single plates in horizontal position. Always use these clamps per pair.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Safety factor: 5
CHT horizontal lifting clamps for thin plates
592.28 €*
WLL:
1
HT lifting clamps with reverse segments for safe transportation of thin steel plates sagging during lifting.
Properties
Always use per pair.
WLL and the size of the jaw opening are clearly marked on the clamp.
Safety factor of at least 5 x WLL.
Each clamp is 2 x WLL test load.
Application
For lifting thin sheet steel plates in horizontal position to a hardness of 37RC (345 HB).
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155
REMA RMBCV Beam clamp with swivel jaw
503.72 €*
WLL:
3
REMA RMBCV with adjustable jaws is an adjustable spindle beam clamp that grips the flange of the beam in an optimal way.
Properties
Robust design.
Wide jaw openings.
Quick assembly.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Safety factor: 4
CSEU vertical lifting clamp
1,477.21 €*
WLL:
3
For hoisting and transporting plates and constructions from any position.
Properties
When 1 Clamp with a varying jaw opening is required.
Adaptable in steps of 30 mm.
Strong and lightweight construction.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: Minimum weight to be lifted is 10% of the safe workload.Safety factor: 5
CU-H universal plate lifting clamps for plates till 50RC (485 HB)
621.54 €*
WLL:
0.75
Lifting clamps for safely transporting steel plates in vertical position.
Properties
Equipped with universal lifting eye, movable in two directions.
Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
WLL and size of the jaw opening are clearly indicated on the clamp.
Safety factor of at least 5 x WLL.
Each clamp is 2x WLL testloaded.
Application
For lifting steel plates up to a hardness of 50 RC (485 HB).
Suitable for lifting, 180 ° turning and vertical transport of steel plates.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: Minimum weight to be lifted is 10% of the safe workload.Safety factor: 5
CSV spindle beam clamps
377.66 €*
WLL:
1
Suitable for lifting steel beams or can be utilized as semi-permanent lifting eyes.
Properties
Beam clamp equipped with spindle for quick and easy mounting on a beam.
Safety factor of at least 5 x WLL.
Each clamp is 2 x WLL test.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Safety factor: 5
REMA RMMC Clamp
386.02 €*
WLL:
0.2
REMA RMMC mounting clamps have been developed to easily raise heavy loads. for mounting use 2 hoists, provided there is sufficient space above the beam.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155
REMA RMAC Beam clamp
355.37 €*
WLL:
1
Adjustable spindle beam clamp for creating a semi-permanent suspension point. With a second screw fastens the clamp to prevent movement.
Properties
Simple and quick assembly.
Suitable for various sizes of angle profile.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Safety factor: 4
Superclamp USC-serie
1,345.57 €*
WLL:
3
Adjustable beam clamps for rail profiles.
Properties
Fitted with a special catch to prevent beams from displacement.
With fixed suspension eyes allowing loads at any angles.
Application:
To be use as a semi-permanent suspension point at angle beams.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100
CDK fluted sheet lifting clamps
735.82 €*
WLL:
3
Application
Specifically developed for safe lifting and transportation fluted plates of dams. These clamps must always be used in pairs.
Option
Schackle (3011011)
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Note: Always apply these clamps per pair.Warning: WLL 3t is per pair
CBS bulb screw clamps fot HP-profiles
423.65 €*
WLL:
1.5
Properties
Equipped with a thread spindle for easy attachment, providing a powerful clamping force on the workpiece
Lightweight design for easy handling.
Maintenance-friendly, easy to exchange parts which are available upon request.
Application
For use as a (temporary) lifting point in spaces with HP- (bulb) profiles, like sectional ship parts and ship engine rooms.
Used for HP-100 to HP-240 (bulb) profiles.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100
CBU Lightweight Holland profile (Hp) clamp for universal lifting
1,794.94 €*
WLL:
3
Specifically developed for lifting and transportation HP profiles and ship constructions using HP profiles. Fitted with 2 cams and universal lifting eyes.
Application
For vertical lifting, handling and transporting of Holland Profile (HP) shipbuilding structures from all positions
Jaw openings available from: 0 to 45 mm
Higher WLL available upon request.
Lifting of longer sections should be performed with a spreader beam fitted with multiple clamps.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Warning: Min . WLL is 10% of max . WLL.Safety factor: 5
PU-20 pallet puller
156.46 €*
WLL:
2.2
Properties
Single clippers with wider jaw openings.
Application
Suitable for wooden pallets and crates.
Marking: CE-marked
CS-H vertical plate lifting clamps for plate till 50RC (485 HB)
511.45 €*
WLL:
0.75
Lifting clamps for safely transporting steel plates in vertical position.
Properties
Equipped with standard lifting eye, movable in one direction.
Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
WLL and size of the jaw opening are clearly indicated on the clamp.
Safety factor of at least 5 x WLL.
Each clamp is 2x WLL testloaded.
Application
For lifting steel plates up to a hardness of 50 RC (485 HB).
Suitable for lifting, 180 ° turning and vertical transport of steel plates.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: Minimum weight to be lifted is 10% of the safe workload.Safety factor: 5
Concrete pipe lifting clamp CBA, vertical.
582.52 €*
WLL:
1.5
Properties:
Specifically developed for safe lifting of concrete pipes in vertical position.
On special order supplied with chains and crane eyes.
Optional:
Lifting chain: 3-legs chain/8mm/RMA-8/C-link/1500mm
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: WLL and weight is allways per set of 3 pcs.Warning: Always to be used per 3 pieces.
CUER plate lifting clamps for hoisting stainless steel plates
780.41 €*
WLL:
1
For safe lifting and transporting in vertical position of stainless steel plates.
Properties
Segment, segment axis and pivots are made of stainless steel.
The housing and the latch pin are nickel plated to prevent the contact between carbon steel and stainless steel plates.
Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Note: Minimum weight to be lifted is 10% of the safe workload.