Chain Sing CSY-180 Grade 12
0.00 €*
Chain diameter:
10
|
WLL:
5
Design: Master link in each end. Dimension: Ø 7-13 mm.Material: Alloy steel grade 12.Marking: According to standardStandard: EN 818-4 Grade: 12
Connecting Link Pewag CWP connex
30.67 €*
Chain diameter:
8
|
WLL:
3
Universal connecting link consisting of two die-forged identical halves, a bolt and a safety sleeve.
Material: Alloy steelMarking: According to standard, CE-marked, Pewag or PW, winner pro or 12, H16, batch code and type.Temperature range: -60ºC up to +300ºC.Finish: Light blue powdercoated.Standard: EN 1677-1 Warning: Not to be heat-treated.Safety factor: 4:1Grade: 12
Eye Sling Hook Pewag HSWP
31.38 €*
WLL:
3
This eye sling hook is ideally suited for the pewag winner pro Connex system. It is universally usable and comes with a forged and galvanised safety catch that locks into the tip of the hook, thereby providing excellent protection against lateral shifts. The safety catch with a latch, the safety pin and the stainless spring are available as a spare parts set for each hook and easy and quick to replace by a competent person.
Material: Alloy steel.Marking: According to standard, CE-marked, Pewag or PW, winner pro or 12, H16, batch code and type.Temperature range: -60ºC up to +300ºC.Finish: Light blue powdercoated.Standard: EN 1677-2 Warning: Not to be heat-treated.Safety factor: 4:1Grade: 12
pewag winner lashing Example of order text
0.00 €*
Below you will find a detailed example of a finished and commercially available pewag lashing chain.pewag winner 8 mm - single lashing chain with shortening hooks an hook mounted with Connex connecting links, length: 3.500 mm.
pewag winner pro lashing Example of order text
0.00 €*
Below you will find an example of a finished pewag lashing chain that can be commercially ordered.pewag winner pro 8 mm - one-piece lashing chain with shortener and clevis sling hook, assembled with connex-connecting links. Lenght: 3.500 mm.
Direct lashing G12
0.00 €*
This table provides information on how to get the best use from the pewag lashing systems. The loads specified are maximum loads which can be secured with 4 equal lashing systems given the angles and dynamic friction factors referred to. Additional securing methods (i.e. wedges, or similar) have not been taken into account. These could be used to secure loads with even higher weights. Please contact our customer service. Every lashing system has its own table. The maximum forces occurring due to acceleration, braking and avoidance maneuvers in road traffic acc. EN 12195-1 were taken into account. Other tables are applicable for transport by rail and sea. Please contact our customer service.Grade: 12
Safety Latch G6+ SFGWI Stainless
0.00 €*
Stainless steel safety latch set with extra strong spring and rivetable safety pin.
Grade: 6
Transition Link Pewag BWI Stainless
12.08 €*
WLL:
0.9
Stainless steel master link for 1- and 2-leg chainslings.
A higher resistance to acids and caustics compared to the standard transition links G8, G10 and G12 is just one of the many benefits that make this stamped transition link truly remarkable. The use of high-grade stainless steel also ensures that this electrically welded transition and securing link will never rust.
The transition link is part of welded assemblies, may also be used as an end link and is tested at 100 % of its maximum load capacity. Its dimensions are similar to DIN 5688‑1.
The outstanding quality of this transition link is also reflected in its wide range of possible applications: It may be used as a connecting link for assembling I- to IV-leg assemblies in welded systems as well as an end link. In addition, it is ideally suited for use in water and wastewater applications and can also be used in connection with chemicals and food products; however, restrictions will apply.
Material: 1.4404 (AISI 316L), 1.4462 (AISI 318LN).Marking: CE-markedFinish: Pickled and blasted.Safety factor: 4:1Grade: 6
Chain Sling CSY-275 Grade 12
0.00 €*
Chain diameter:
10
|
WLL:
7.1
Design: Master link in one end and load hook - clevis in each leg.Dimension: Ø 7-13 mm.Material: Alloy steel grade 12.Marking: According to standardStandard: EN 818-4 Safety factor: 4:1Grade: 12
Identification, Documentation
0.00 €*
Lashing chains meet the EN 12195-3 standard an are supplied with:● Identification tag● Manufacturer certificate● User information● Test certificate
Chain Sling CSY-375 Grade 12
0.00 €*
Chain diameter:
10
|
WLL:
10.6
Design: Master link in one end and load hook - clevis in each leg. Dimension: Ø 7-13 mm.Material: Alloy steel grade 12.Marking: According to standardStandard: EN 818-4 Safety factor: 4:1Grade: 12
Grab Hook with Safety Pin Pewag PSWP
55.54 €*
WLL:
3
For pewag winner pro connex system. Hook for shortening which prevents the accidential release of the chain. Special design of the chain contact area for optimal interaction between chain and hook.
Material: Alloy steel Marking: According to standard, CE-marked, Pewag or PW, winner pro or 12, H16, batch code and type.Temperature range: -60ºC up to +300ºC.Finish: Light blue powdercoated.Standard: EN 1677-1 Warning: Not to be heat-treated.Safety factor: 4:1Grade: 12
Frictional lashing G12
0.00 €*
This table provides information on how to get the best use from the pewag lashing systems. This table also shows you the maximum load which can be secured with 1 lashing system given the angles and dynamic friction factors referred to. Please note that when friction lashing min. 2 lashing systems are needed. Additional securing methods (i.e. wedges, or similar) have not been taken into account. These could be used to secure loads with even higher weights. Please contact our customer service. The values in the table are applicable in the event that the same tension force (STF) is not effective in the lashing system on both sides of the load due to the deflection and edges. If this can be determined (e.g. using a pretensioning gauge), the values in the table may be increased by a factor of 1.3. The maximum loading weight depends on the STF value of the tensioning system – the value is shown on the lashing system‘s tag. Every lashing system has its own table. The maximum forces occurring due to acceleration, braking and avoidance maneuvers in road traffic acc. EN 12195-1 were taken into account. Other tables are applicable for transport by rail and sea. Please contact our customer service.Grade: 12
Chain Shortener Pewag VLWI Stainless
0.00 €*
WLL:
0.9
Stainless steel shortener for shortening of stainless steel chains, extremely convenient in applications, in assembled systems or for retrofitting.
Preferred areas of application for the VLWI shortener are water and wastewater applications and the product can also be used in connection with chemicals and food products; however, restrictions will apply and we recommend that you contact the manufacturer for advice prior to exposing the product to such use.
Material: VLWI 5/6 - 7/8 1.4571 (shortener) and 1.4404 (BWI) / AISI 316 TI (shortener) and AISI 316 L (BWI).
VLWI 10 - 16 1.4571 (shortener) and 1.4462 (BWI) / AISI 316 TI (shortener) and AISI 318 LN (BWI).
Marking: CE-markedFinish: Pickled and blasted.Safety factor: 4:1Grade: 6
Stainless Steel Snap Hook SS
2.35 €*
Length:
50
Typical applications: For connecting 2 chains.
Material: AISI 316.Warning: Not for lifting.Grade: 5
Lifting Eye Pewag PLBW
97.12 €*
WLL:
0.3
Screwable, 360° rotatable lifting point. The load ring is 180° movable and can be positioned at any required angle due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw of grade 10.9 material, which is secured against loss.
The screw is 100% crack-tested as well as covered with a chromate VI-free protection against corrosion. It can be tightened with a hexagon wrench or spanner wrench.
Pewag winner profilift beta is available with metric or UNC-thread, whereas the lifting points with metric thread are also obtainable with customized thread lengths.
Permissible usage
Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull – see picture 1 and 2.
Non permissible usage
Make sure when choosing the assembly that improper load can not arise e.g. if:
The direction of pull is obstructed.
Direction of pull is not in the foreseen area (see picture 3).
Loading ring rests against edges or load (picture 4).
The load ring must be placed in the direction of pull before loading – do not turn under load.
To calculate the necessary thread length (L):
L= H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
pewag provides, along with the standard and maximum thread lengths, specially customised thread lengths. Supplied customised and maxium thread lengths include a washer and a crack-tested, corrosion-proofed screw nut.
Material: Alloy steelMarking: According to standard, WLL, thread size and an individual serial number.Standard: EN 1677-1 except grade/WLLSafety factor: 5:1
Master Link Assembly Pewag VWI Stainless
93.98 €*
WLL:
1.3
Stainless steel master link for 3- and 4-leg chainslings.
This stainless steel chain sling is electrically welded for a clean finish, stamped and ideally suited for assembling III- and IV-leg chain slings in welded or assembled systems. The dimensions are similar to DIN 5688‑1.
The VWI Master link assembly is tested at 100 % of its load capacity. It is made from high-grade stainless steel with a higher resistance to acids and caustics than the standard four-leg chain slings G8, G10 and G12.
It is ideally suited for use in water and wastewater applications and can also be used in connection with chemicals and food products; however, restrictions will apply.
Material: 1.4404 (AISI 316L), 1.4462 (AISI 318LN).Marking: CE-markedFinish: Pickled and blasted.Safety factor: 4:1Grade: 6
Fall Protection Anchorage Eye Bolt PLGW-PSA
77.51 €*
The pewag PLGW-PSA anchorage point is part of the anchorage system on which personal fall protection equipment can be fastened.
The PLGW-PSA is available in „Basic“ and „Supreme“: PLGW-PSA Basic is intended for permanent assembly to the anchorage system (e.g. tripod) and is mounted using a commercial Allen key.
The PLGW-PSA Supreme version has a patented system which allows for tool-free assembly and disassembly once the anchorage point is no longer in use and needs to be removed.
Material: Alloy steel grade 10.Marking: According to standard, permitted number of persons, standards, individual serial number, manufacturer, production year, product ID.Finish: Orange powder coated.Standard: EN 795 , CEN/TS/16415 Warning: Anchor point must always be tested after installation.
Safety Latch G5 SFGWI Stainless
30.52 €*
Stainless steel safety latch set with extra strong spring and rivetable safety pin.
Grade: 5
Chain Sling CSY-176 Grade 12
0.00 €*
Chain diameter:
7
|
WLL:
2.36
|
EWL:
5
Design: Master link in one end and safety hook - clevis in the other end. Dimension: Ø 7-13 mm.Material: Alloy steel grade 12.Marking: According to standardStandard: EN 818-4 Safety factor: 4:1Grade: 12
Chain Sling CSY-376 Grade 12
0.00 €*
Chain diameter:
7
|
WLL:
5
|
EWL:
5
Design: Master link in one end and safety hook - clevis in each leg. Dimension: Ø 7-13 mm.Material: Alloy steel grade 12.Marking: According to standardStandard: EN 818-4 Safety factor: 4:1Grade: 12
Chain WOX Stainless Pewag - Short Link
25.76 €*
Chain diameter:
4
|
Min. Breaking force kN.:
16
|
WLL:
0.4
Stainless steel lifting chain, electrically welded and stamped, guaranteed compatible with Connex CWI connectors.
Standard: Similar DIN 5687-1
The WOX chain is particularly suited for use in water and wastewater applications. It can also be used in connection with chemicals and food products; however, restrictions will apply.
Material: 1.4404 (AISI 316L).Marking: According to standardFinish: Brightly polished.Standard: EN 818-2Safety factor: 4:1Grade: 6