Filter
–

Hooks & Lugs

We offer the following articles in the category hooks & lugs:

  • Weld-on hooks
  • Container hooks
  • Clevis hooks
  • Round sling hooks
  • Shortening hooks
  • Swivel safety hooks
  • Eye hooks
Self-Locking Hook SLC POWERTEX (with clevis)
Self-Locking Hook SLC POWERTEX (with clevis)
WLL: 1.4
The POWERTEX Self-Locking Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed.  Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available with eye connection instead of clevis as model SL. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

18.48 €*
View product
Self-Locking Hook SLS POWERTEX (slide-bearing swivel)
Self-Locking Hook SLS POWERTEX (slide-bearing swivel)
WLL: 1.4
The POWERTEX Self-Locking Hook with slide bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed. The eye has a slide-bearing swivel and can be rotated when the hook is unloaded, enabling positioning before lifting.   Available for 6 mm up to 20 mm chain and from WLL 1.4t up to WLL 16t. Also available with ball bearing (POWERTEX SLS-B). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLS-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

27.20 €*
View product
Grab Hook GH POWERTEX (with eye)
Grab Hook GH POWERTEX (with eye)
WLL: 40
The POWERTEX Grab Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The Grab Hook is used for shortening lifting chains, and adding them to an assembly makes the lifting chain assembly much more versatile. It enables full WLL because the support wings prevent the lifting chain from deforming. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available as Grab Hook with clevis (GHC) instead of the eye connection. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (GH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

Variants from 5.88 €*
1,163.40 €*
View product
Sling Shackle CS POWERTEX (with clevis)
Sling Shackle CS POWERTEX (with clevis)
WLL: 2.5
The POWERTEX Sling Shackle CS with integrated clevis is part of the Powertex G10 Lifting Sling Chain Components range. The sling shackle is a useful shackle that can be attached directly to the chain. It offers a low-build and cost-effective solution by replacing the typical connector and link and shackle setup in situations where the assembly stays connected to the load for extended periods. A nut and a split pin secure the load-bearing pin. Available for chain size 8 mm up to 16 mm and WLL 2,5t up to 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (CS-8-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

21.88 €*
View product
Self-Locking Hook SLS-B POWERTEX (ball-bearing swivel)
Self-Locking Hook SLS-B POWERTEX (ball-bearing swivel)
WLL: 1.4
The POWERTEX Self-Locking Hook with a ball-bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed. The eye has a ball-bearing swivel and can be rotated both loaded and unloaded. Available for 6 mm up to 26 mm chain and from WLL 1.4t up to WLL 26,5t. Also available with slide-bearing (POWERTEX SLS). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLS-6-10B) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

35.76 €*
View product
Self-Locking Hook SL POWERTEX (with eye)
Self-Locking Hook SL POWERTEX (with eye)
WLL: 1.4
The POWERTEX Self-Locking Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed.  Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available with clevis instead of eye connection as model SLC. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SL-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

17.36 €*
View product
6-16 mm
Sling Hook SH POWERTEX (with eye)
WLL: 1.4
The POWERTEX Sling Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is very easy to use and can be attached rapidly to lifting points. The hook has a solid latch. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available as clevis type (POWERTEX SHC). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

11.68 €*
View product
Grab Hook GHC POWERTEX (with Clevis)
Grab Hook GHC POWERTEX (with Clevis)
WLL: 2.5
The POWERTEX Grab Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The Grab Hook is used for shortening lifting chains, and adding them to an assembly makes the lifting chain assembly much more versatile. It enables full WLL because the support wings prevent the lifting chain from deforming. Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available as Grab Hook with eye (GH) instead of the clevis connection. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (GHC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

Variants from 6.84 €*
8.80 €*
View product
Sling Hook SHS-B POWERTEX (ball bearing swivel)
Sling Hook SHS-B POWERTEX (ball bearing swivel)
WLL: 1.4
The POWERTEX Sling Hook SHS-B with a ball-bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. Using the sling hook is very easy as it can be quickly attached to lifting points. Its sturdy latch ensures security. Moreover, the eye of the hook is designed with a ball-bearing swivel, allowing for both loaded and unloaded rotation. Available for 6 mm up to 16 mm chain and from WLL 1.4t up to WLL 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SHS-6-10B) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

34.16 €*
View product
Foundry Hook FH POWERTEX
Foundry Hook FH POWERTEX
WLL: 1.4
The POWERTEX Foundry Hook FH is designed for the assembly of chain slings where wide throat openings are necessary. It is part of the Powertex G10 Lifting Sling Chain Components range. Available for chain size 6 mm up to 16 mm and WLL 1.4t up to 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (FH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Warning: Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.Safety factor: 4:1Grade: 10

13.64 €*
View product
1 ton
Sling Hook SHR POWERTEX (for round slings)
WLL: 1
The POWERTEX Sling Hook SHR with round sling connection is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is specifically designed to be combined with round slings but can also be used with other textile slings. The dimensions of the top fitting are carefully designed to provide the best possible support for the round sling. The hook colors are chosen to match those of round slings with the same capacity to make it easier for users. Additionally, the hook is designed to offer an ideal grip and features a sturdy latch. Available in WLL 1t, 2t, 3t and 5t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate & EC/UKCA Declaration of Conformity enclosed with each box of components Marking: According to standard, CE-marked, UKCA-marked, POWERTEX + Model (SHR-1T-10) + traceability code + Working Load LimitTemperature range: -40°C up to +200°C without reduction in WLLFinish: Powder paintedStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

21.28 €*
View product
Sling Hook SHC POWERTEX (with clevis)
Sling Hook SHC POWERTEX (with clevis)
WLL: 1.4
The POWERTEX Sling Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is very easy to use and can be attached rapidly to lifting points. The hook has a solid latch. Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available as eye type (POWERTEX SH). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SHC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

12.44 €*
View product
Container Hook CH POWERTEX
Container Hook CH POWERTEX
WLL: 16
POWERTEX Container Hook CH for bottom lifting of containers is available in a Left (L), Right (R) and Straight (S) version. This product is part of the Powertex G10 Lifting Sling Chain Components range. It's an easy-to-use and cost-effective component for lifting containers.  - The container hooks in Left and Right version shall be used with a spreader beam with four inclined legs (two Left and two Right) at 45°+-15°.  - The container hook Straight version shall be used with a spreader frame with four vertical legs 0° +- 15°. To hooks must be used with 20 mm chain, and have a WLL of 16t.  Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (CH-20-10x) + traceability code.Temperature range: -40 up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

124.24 €*
View product
Oval carabiner
Oval carabiner
Length: 32
Marking: AISI-316Warning: Not for lifting

6.08 €*
View product
Eye hook type 14A (Grade 8)
Eye hook type 14A (Grade 8)
WLL: 1.25
Material: Alloy steel.Marking: According to standard, CE-markedStandard: EN 1677-2 Note: Safety latch.Warning: Cannot be rotated under load

63.85 €*
View product
Concrete hook type RBH
Concrete hook type RBH
WLL: 1.3
For lifting PREFAB concrete plates. Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155

38.01 €*
View product
REH eye hook with safety latch (Grade 10)
REH eye hook with safety latch (Grade 10)
WLL: 1.4
All Rema 10 chain sling lifting components are marked with the H-stamp and have the approval of the German BG (Deutsche Berufsgenossenschaft). Rema bears its unique H-84 number, which provides a solid proof of quality. Marking: According to standard, CE-markedStandard: EN 1677-2 Safety factor: 4Grade: 10

12.67 €*
View product
RCS self locking clevis hook (Grade 10)
RCS self locking clevis hook (Grade 10)
WLL: 1.4
Marking: According to standard, CE-markedStandard: EN 1677-3 Safety factor: 4Grade: 10

20.90 €*
View product
RSS swivel self locking hook (Grade 10)
RSS swivel self locking hook (Grade 10)
WLL: 1.4
Marking: According to standard, CE-markedStandard: EN 1677-3 Safety factor: 4Grade: 10

48.65 €*
View product
REG eye shortening grab hook (Grade 10)
REG eye shortening grab hook (Grade 10)
WLL: 1.4
Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 10

8.64 €*
View product
Eye hook type 14A (Grade 8)
Eye hook type 14A (Grade 8)
WLL: 1.25
Material: Alloy steelMarking: According to standard, CE-markedStandard: EN 1677-2 Note: Safety latch.Safety factor: 4Grade: 8

15.41 €*
View product
RES eye self locking hook (Grade 10)
RES eye self locking hook (Grade 10)
WLL: 1.4
Marking: According to standard, CE-markedStandard: EN 1677-3 Safety factor: 4Grade: 10

22.80 €*
View product
RSBS swivel self locking hook (Grade 10)
RSBS swivel self locking hook (Grade 10)
WLL: 1.4
Marking: According to standard, CE-markedStandard: EN 1677-3 Note: With bearing, rotatable under load.Safety factor: 4Grade: 10

60.43 €*
View product
Hook for Multi Bucket System Vehicles
Hook for Multi Bucket System Vehicles
WLL: 6.7
Hooks for multi bucket systems for chain slings. Safety factor: 4:1Grade: 10

Variants from 216.11 €*
215.38 €*
View product