Magnet lifters

POWERTEX Permanent lifting magnets PLM are very strong, durable and easy to use. The lifting magnets are designed to be versatile and can be used to attach to both flat and circular objects. They need limited maintenance and are designed to keep the lifting capacity over a long lifetime. The PLM magnets are very powerful compared to their dimensions and are light in weight. Features: Safe - each lifting magnet is proof load tested to 3,5 x WLL and inspected before leaving the factory High quality powerful Neodynium permanent magnets inside Light weight Designed to lift on both flat and circular surfaces Very high safety factor 3,5 (EN 13155 require SF 3) The increased safety factor increase life time and assures that standard safety factor 3 can be met also after annual check Strong and durable powder painted steel housing with machined connection surface Wear and corrosion resistant Chrome plated shackle as top connection Handle is equipped with a positive locking device and double locking for extra safety RFID equipped (chip) for easy registration, service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each lifting magnet Spare parts available Material: High quality magnetic material in strong and solid housingMarking: According to standard, CE-marked, POWERTEX, model, WLL, individual serial number, manufacturing date, QR code, capacity chart and equipped with a warning tag.Temperature range: -40°C – +80°C.Finish: Red powder painted housing and Chrome plated shackleStandard: EN 13155 Note: Max. lifting capacity is based upon lifting clean, flat, low-carbon steel plate with the full area of the magnet’s pole area in contact with the load.Safety factor: 3,5:1.

REMA RM battery magnets with built-in 12V battery are suitable for lifting both flat and round materials (type RMP). Characteristics Equipped with 12V battery with a working time of at least 8 hours. Infrared remote control up to a distance of 4.5 meters. Direct connection to 230V to charge battery. LED indication for battery voltage. Magnet design RM is 3-pole and RMP is 2-pole. High safety requirements. By means of the additional pressure switch under the lifting eye, the magnet cannot be switched off. 2 pushbuttons must be pressed to release plates. Equipped with acoustic signaling and LED light at low battery voltage. Magnet cannot be switched on at low battery voltage. Proven with 2 x the workload. Battery type according to DIN43539-3. Application For lifting heavy, thick sheet materials up to a maximum load of 5000 kg. Type RMP is also applicable to round materials from a minimum of 25 mm to 300 mm. Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155

REMA PK and MK hand magnets are an indispensable tool in places where a lot of steel plates are used. Properties GS-approved. Oil and grease have little influence on the magnetic force. The carrying handle is robust, ergonomic and plastic-coated. It is easy to detach the magnet from the workpiece by pressing down the handle or lever at the crane magnets, the leaf spring pushing the magnet loose without damaging the workpiece. After releasing the magnet, the workpieces are not magnetic. PK type is equipped with a plastic housing. Safety factor 2. Application Horizontally or vertically stored blank steel sheets from stock to the workplace. Safe manoeuvring of steel sheets on machine. Lifting and transporting pieces of steel sheet after cutting. Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155

REMA QPM Neodymium permanent lifting magnets are suitable for lifting and transporting flat and cylindrical ferromagnetic materials ("magnetically supported as steel"). Properties Safety factor 3.5. High-quality Neodymium magnet material [NdFeB]. Virtually no residual magnetism after decoupling prevents accidents. Simple and light lever operation with safety button. V-groove makes it possible to hoist cylindrical workpieces next to flat surfaces. Compact and robust construction with a large lifting eye. Type selection: Choose the type of magnet to match the load to be lifted. Important features are the thickness, weight, size of the magnetic surface, material specification, surface structure, air gap and symmetrical load. Application: REMA QPM permanent lifting magnets can be used as grabs in lifting and hoisting applications for horizontal and vertical materials handling in stores, steel construction manufacturing plants, machine and assembly bays etc. IMPORTANT: Never exceed the safe workload. The full lifting force is only achieved if the surface of the steel plate to be lifted (St 37k and 25 mm thick) is processed, smooth and clean. Note that only one plate is lifted at a time when lifting thin sheets from a stack. Note the “peeling action” when lifting thin plates, these will bend and can become detached from the lifting magnet. Never let a lifting magnet come down hard on the ground. It is forbidden to be under the load of a lifting magnet, no persons should be put in danger while working with lifting magnets. Never lift loads on which loose objects are located. Do not lift uneven and porous workpieces. Surface must be dry, clean, oil and grease free. Lifting magnets only start on company-safe cranes and load hooks etc. Prevent shock loads during lifting and place the load in a controlled manner. Always check the quality of the control knob on the handle, guide and safety pin before use. Have the lifting magnet inspected and inspected by an authorized person or body every year. Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 Safety factor: 3,5

REMA MK-250KS and MK-500KS are suitable for both vertical and horizontal lifting and transporting steel plates, allowing the steel plate can be rotated, which is an advantage in vertical storage. Both types are suitable for lifting steel sheets from 4 mm thick. With 20 mm thick steel plates the maximum lifting force is achieved. A lifting magnet is sufficient for steel sheets with a size of 1 x 2 m. For steel plates of 1.5 x 3 m two lifting magnets with a crossbar are required. Properties Tiltable lifting eye. Can be used where high safety requirements apply and / or the surface of the steel plate is not 100% smooth or clean. IMPORTANT! The full lifting force is only achieved if the surface of the steel plate to be lifted (St 37k and 25 mm thick) is processed, smooth and clean. Never exceed the safe workload. Hand magnets have safety factor 2. Crane magnets have safety factor 3. It is forbidden to be under the load of a crane magnet. Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100

REMA PFR permanent lifting magnets are manufactured from neodymium magnetic material resulting in very powerful lifting magnets in relation to the own weight and dimensions. REMA PFR permanent lifting magnets are suitable for both round and flat workpieces. Properties Safety factor 3. Powerful Neodymium magnet material. Very high lifting capacity. Easy operation. Light mechanical operation with safety lever. Large lifting eye. Compact design. Low own weight. Robust construction of house and magnet. Application Workshops, warehouses and machine tools such as cutting, milling, grinding and sawing machines, bending machines and lathes. Option Tilt arm for PFR 250 (3601013) and PFR500 (3601015) Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Safety factor: 3

For lifting and tilting steel plates up to 500 kg. From horizontal to vertical. Properties HA-250 for plates with a width of 250-800 mm and a length of 200-1500 mm. HA-500 for plates with a width of 250-1000 mm and a length of 250-2000 mm. Application The tilting of steel plates in warehouses and workshops. Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155