Our smart chain sling system in Grade 10 consists of 1-leg and 2-leg slings that can be used directly from the box. The smart slings can instantly be combined on the crane hook to lift loads that require 3 or 4 legs to be used. Features: Multifunctional chain slings Grade 10 packed in box having all necessary markings and documents and ready for use The smart stainless steel sling tag gives information of the WLL for the sling as configurated, but also when used in any 1-4 leg PCSB combination Two 1-leg or 2-leg PCSB slings can easy and safely be combined on the crane hook to perform 2-leg, 3-leg and 4-leg lifting operation thanks to the smart sling tag 2-leg slings can also safely be used in a 1-leg lifting operation as adequate information is given on the smart sling tag (Non-used leg should be hooked to the master link to avoid snagging) +25% higher lifting capacity (WLL) compared to standard Grade 8 slings Light weight thanks to the smart, multifunctional top com­ponents Cost effective compared to conventional slings thanks to use of multifunc­tional components Shortening function is integrated in the master link connector allowing the chain legs to be adjusted instantly Shortening can be made from either side of the shortener which is a safety advantage compared to shortening clutch. No reduction of WLL when shortening the chains thanks to the well-designed shortening pockets Robust self-locking safety hooks are standard Safe - Each welded master link and chain link is proof load tested in the factory 2,5 x WLL prior delivery Safe - Each hook and forged coupling component is crack detection tested and samples are proof load tested in factory prior delivery Components are fatigue rated to +20,000 cycles at 1.5 times the WLL acc to EN-1677 standards Each component is marked with traceability code that gives full traceability to the raw material European made lifting chains The chains are stamped with traceability code that gives full traceability to the raw material The chain slings are chromium 6 free The slings are equipped with a drop shaped stainless RFID tag (HF 13,56 Mhz) QR code for on-site access to Multilanguage user manuals Fulfills EN 818-4 (+25 % WLL) and the Machinery Directive 2006/42/EC POWERTEX 2.2 Certificate & EC Declaration of Conformity in 14 languages enclosed POWERTEX User Manual in 14 languages enclosed Material: Quenched and Tempered Alloy Steel of Grade 10 qualityMarking: According to standard, CE-marked, WLL, Chain size, Length, Grade 10, Serial number, MFG date, QR code leading to user manual Temperature range: -40ºC up to +200°C without reduction of WLLFinish: Painted blueStandard: EN 818-4 (+ 25% WLL) and ASTM A973Safety factor: 4:1Grade: 10

The POWERTEX Sling Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is very easy to use and can be attached rapidly to lifting points. The hook has a solid latch. Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available as eye type (POWERTEX SH). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SHC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Master Link M is part of the range of Powertex G10 Lifting Sling Chain Components. Master Link M is to be used as the top ring one-leg and two-legged chain sling assemblies. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 56t. All models up to M-3226-10 are forged. Model M-3632-10 is welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model(M-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are forged, except M-3632-10 which is weldedSafety factor: 4:1Grade: 10

The POWERTEX Foundry Hook FH is designed for the assembly of chain slings where wide throat openings are necessary. It is part of the Powertex G10 Lifting Sling Chain Components range. Available for chain size 6 mm up to 16 mm and WLL 1.4t up to 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (FH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Warning: Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.Safety factor: 4:1Grade: 10

The PRFID (POWERTEX Radio-Frequency IDentification) chip is intended to be used for quick and easy asset control. The chip has a unique ID-number making it possible to connect the chip to a certain product, using an asset control program like CertMax+ to plan that inspections etc. are carried out in time. Adhere the chip on the product so it can be read by the RFID scanner Features: RFID chip type: Self-adhesive token Operation frequency: HF – 13,56 MHz Reading distance: Min. 25 mm Adhesive: 3M 9495LE foam glue and anti-metal layer Protection class: IP66 Material: ABSTemperature range: -20°C up to +70°C

High quality calibrated lifting chain intended for use in demanding applications like Grade 10 chain slings. The chains are delivered in sturdy barrels or cages and can quick and easy be cut locally to fit the end-customer’s needs. Features: Safe - each chain link is proof load tested 2,5 x WLL in the factory prior delivery Safe - each production batch is tested to meet the min. breaking force Ductile - Min. 20% elongation shall be achieved before failure Accurate - each length of chain is calibrated in the factory prior delivery Consistent – PSL chains are made in automatic chain welding machines Compliant - the chains are made in Europe - fulfill the Machinery directive 2006/42/EC Each barrel includes a 14 language 2.2 Certificate and EC/UKCA Declaration of Conformity Each chain length carries a chain tag for quick and positive identification The barrel is marked with an info sticker that allow quick and positive identification of the chain inside Material: Quenched and Tempered Alloy Steel of Grade 10 qualityMarking: According to standard, CE-marked, UKCA Marked, Factory symbol, Grade (10), Traceability batch marking Temperature range: -40°C up to +200°C without reduction in WLLFinish: Painted blueStandard: EN 818-2 (+ 25% WLL) and ASTM A973Safety factor: 4:1Grade: 10

The POWERTEX Self-Locking Hook with a ball-bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed. The eye has a ball-bearing swivel and can be rotated both loaded and unloaded. Available for 6 mm up to 26 mm chain and from WLL 1.4t up to WLL 26,5t. Also available with slide-bearing (POWERTEX SLS). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLS-6-10B) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Master Link MX (Extra Large) is part of the range of Powertex G10 Lifting Sling Chain Components. The Master Link is extra large and can be fitted on crane hooks made according to DIN15401 no. 25 and DIN 15402 no. 32. Master Link MX is to be used as the top ring in one-legged chain sling assemblies. Available for 10 mm up to 20 mm chain and from WLL 4t up to WLL 16t. All models are forged. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MX-10-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: In order to mount C-10-10 to MX-10-10 one C-13-10 needs to be mounted as transition link.Safety factor: 4:1Grade: 10

The POWERTEX Self-Locking Hook with slide bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed. The eye has a slide-bearing swivel and can be rotated when the hook is unloaded, enabling positioning before lifting.   Available for 6 mm up to 20 mm chain and from WLL 1.4t up to WLL 16t. Also available with ball bearing (POWERTEX SLS-B). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLS-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Self-Locking Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed.  Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available with eye connection instead of clevis as model SL. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Grab Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The Grab Hook is used for shortening lifting chains, and adding them to an assembly makes the lifting chain assembly much more versatile. It enables full WLL because the support wings prevent the lifting chain from deforming. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available as Grab Hook with clevis (GHC) instead of the eye connection. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (GH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Sling Hook SHS-B with a ball-bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. Using the sling hook is very easy as it can be quickly attached to lifting points. Its sturdy latch ensures security. Moreover, the eye of the hook is designed with a ball-bearing swivel, allowing for both loaded and unloaded rotation. Available for 6 mm up to 16 mm chain and from WLL 1.4t up to WLL 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SHS-6-10B) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Self-Locking Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed.  Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available with clevis instead of eye connection as model SLC. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SL-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MC4 is part of the range of Powertex G10 Lifting Sling Chain Components. The MC4 assembly is made up of a master link and two integrated connectors, each with two shortening hooks. This convenient combination allows operators to easily adjust the assembly lengths according to the specific application requirements. Due to its integrated components, this part is more cost-efficient, user-friendly, and lightweight than traditional assemblies. The MC-4 is to be used for four-legged chain sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 3t up to WLL 21,2t. All models have a welded master link and forged connectors. Also available as MC1 for one-leg assemblies and MC2 for two-legged assemblies. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MC4-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MC1 is part of the range of Powertex G10 Lifting Sling Chain Components. The MC1 assembly is made up of a master link and an integrated connector with a shortening hook. This convenient combination allows operators to easily adjust the assembly length according to the specific application requirements. Due to its integrated components, this part is more cost-efficient, user-friendly, and lightweight than traditional assemblies. The MC-1 is to be used for one leg chain sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 1,4t up to WLL 10t. All models have a welded master link and forged connector. Also available as MC2 for two-legged assemblies and MC4 for four-legged assemblies. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MC1-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Sling Hook SHR with round sling connection is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is specifically designed to be combined with round slings but can also be used with other textile slings. The dimensions of the top fitting are carefully designed to provide the best possible support for the round sling. The hook colors are chosen to match those of round slings with the same capacity to make it easier for users. Additionally, the hook is designed to offer an ideal grip and features a sturdy latch. Available in WLL 1t, 2t, 3t and 5t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate & EC/UKCA Declaration of Conformity enclosed with each box of components Marking: According to standard, CE-marked, UKCA-marked, POWERTEX + Model (SHR-1T-10) + traceability code + Working Load LimitTemperature range: -40°C up to +200°C without reduction in WLLFinish: Powder paintedStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Grab Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The Grab Hook is used for shortening lifting chains, and adding them to an assembly makes the lifting chain assembly much more versatile. It enables full WLL because the support wings prevent the lifting chain from deforming. Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available as Grab Hook with eye (GH) instead of the clevis connection. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (GHC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MA is part of the range of Powertex G10 Lifting Sling Chain Components. The assembly MA is to be used as the top ring for three-leg and four-legged chain sling assemblies. Available for 6 mm up to 22 mm chain and from WLL 3t up to WLL 40t. All models are welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MA-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The POWERTEX Master Link assembly MAW (Wide) is part of the range of Powertex G10 Lifting Sling Chain Components. The MAW assembly features wider toplinks and sublinks, making it ideal for larger hooks and steel wire rope slings with thimble eyes. It serves as the top assembly for both three-leg and four-legged chain sling or steel wire rope sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 3t up to WLL 21.2t. All models are welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MAW-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

The PRFIDT (POWERTEX Radio-Frequency Identification) drop tag is intended to be used for quick and easy asset control. PRFIDT has a well-protected chip mounted on stainless drop shaped tag. The tag can easily be mounted to a chain sling or a wire rope sling using POWERTEX heavy duty key ring. The chip has a unique ID-number making it possible to connect the chip to a certain product using an asset control program like CertMax+ to plan so that inspections etc. are carried out in time. The chip´s UID number is also marked on the tag. Features: RFID chip type: Drop shaped tag Operation frequency: HF – 13,56 MHz Protection class: IP68 Material: Stainless steel tag, PA encapsulationTemperature range: -30°C up to +125°C

The POWERTEX Sling Shackle CS with integrated clevis is part of the Powertex G10 Lifting Sling Chain Components range. The sling shackle is a useful shackle that can be attached directly to the chain. It offers a low-build and cost-effective solution by replacing the typical connector and link and shackle setup in situations where the assembly stays connected to the load for extended periods. A nut and a split pin secure the load-bearing pin. Available for chain size 8 mm up to 16 mm and WLL 2,5t up to 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (CS-8-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

POWERTEX Container Hook CH for bottom lifting of containers is available in a Left (L), Right (R) and Straight (S) version. This product is part of the Powertex G10 Lifting Sling Chain Components range. It's an easy-to-use and cost-effective component for lifting containers.  - The container hooks in Left and Right version shall be used with a spreader beam with four inclined legs (two Left and two Right) at 45°+-15°.  - The container hook Straight version shall be used with a spreader frame with four vertical legs 0° +- 15°. To hooks must be used with 20 mm chain, and have a WLL of 16t.  Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (CH-20-10x) + traceability code.Temperature range: -40 up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Sling Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is very easy to use and can be attached rapidly to lifting points. The hook has a solid latch. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available as clevis type (POWERTEX SHC). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX Connecting Link C is part of the Powertex G10 Lifting Sling Chain Components range. It's a quick and cost-effective part for assembling chain slings. The locking spring is encapsulated in a protective steel bushing. Available for 6 mm up to 32 mm chain, and from WLL 1.4t up to WLL 40t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (C-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10