CERTEX offers different winches and hoists. A winch is a device that allows you to pull something with the help of a rope. In this case, the rope is usually pulled by muscle power or a motor. Electric wire rope hoists are used to lift and lower freely moving and guided loads that cannot tilt.
POWERTEX Aluminum wire rope hoist PAPH-S1 is a compact and lightweight hoist that can be used for lifting, pulling and tightening offering very long lifting heights. It works with a steel wire rope running through the jaws of the hoist with a pulling speed of app. 3 m/min. The double sets of jaws open in turns so that the wire rope will always stay tight during the lifting/lowering operation.
20 m coiled steel wire rope with latch hook is included.
Features:
Safe – Each hoist is dynamic proof load tested 1,25 x WLL before leaving the factory.
Compact, lightweight construction with aluminum covers.
Durable construction with powder coated finish and plated frame components.
Equipped with replaceable shear safety pin that prevents overloading (5 spare pins included).
Equipped with rubber protection at the top opening preventing dirt from entering the hoist.
Carrying handle for easy transportation and handling.
20 m coiled steel wire rope with latch hook is included and other lengths can be offered.
Hooks are designed to open at overload instead of breaking.
Hooks fitted with heavy duty steel safety latches.
RFID equipped (chip) for easy service and inspection.
QR code for on-site access to Multilanguage user manual.
Test certificate and Declaration of Conformity enclosed with each hoist.
14 language User manual enclosed with each hoist.
Spare parts available.
Material: Durable aluminium/steel construction, Rubber handleMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Wire rope type, Serial number, User manual/QR code.Temperature range: -10°C up to +50°CFinish: White powder coated body, plated steel parts and galvanized wire rope / hook.Standard: EN 13157 , EN 13414-1 Note: Only original rope can be used with the hoist!Safety factor: 4:1
Electric hoisting winches are constructed to meet the requirements for machines listed in class of use K3 in EN14492 that is an applicable standard for European norms. In some European countries, application of overload limiters and/or limit switches is compulsory. Maritime design available on special order
Properties
Lifting force range: 2 kg to 17 kg.
Drums run on bearings at both sides (from model EHL 58).
Steel base plate (from model EHL 58).
Grooved drums (from model EHL 58).
Larger drum diameters.
Maximum number of wire rope levels on drums: 3.
Brake motor properties
Operating voltage 400V - 3 phase - 50 Hz.
Class of protection F.
Electric protection class motor IP56.
Electric protection class brake IP55.
Standard delivery
RAL2004 Orange painting.
Does not include steel wire rope.
Excluded control pendant.
Option
Steel cable on request.
A load limiter is above 1000 kg.
Deviating speeds and drum diameters.
Infinitely adjustable speed by means of frequency converter.
Shared drum.
Spindle tire brake on drum.
Hydraulic or air-driven.
230V up to 750kg.
Special coating / final color according to RAL.
Slack wire contact.
2nd shaft end with hand crank (example: manual drive).
Anti-condensation heating.
Maritime design on special order
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 Warning: Above 1000 kg, overload limiter is required.
Sling belt set according to EN 1492-1 loop and with hook with safety hook.
Marking: According to standardStandard: EN 1492-1 Warning: Not suitable for lifting.
Properties:
Control cable + pushbutton cabinet with emergency stop IP65 included.
Electronic magnet brake.
Design with bearing.
Steel cable + hook included.
Planetary transmission.
Technical specifications:
CP-300 Motor IP44, 4 poles - 1.15 kW.
CP-500 Motor IP44, 4 poles - 1.8 kW.
230 VAC, 1 Phase, 50 Hz.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492
Properties
One side with hook included safety latch, one side pointed.
Standard delivery:
Wire rope length 20 m.
Option
Longer length on request.
Marking: According to standard, CE-markedStandard: EN 13414-1 , EN 12385-3 , EN 10204
Properties
Zinc-plated housing (DL2500G has a ungalvanized drum).
Fitted with automatic load pressure brakes.
For extra safety, they are fitted with locking pawls.
Standard delivery
Does not include cable.
Options
Steel wire rope according DIN 3060 with safety hook.
Sling belt according DIN 3060 with safety hook.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 Warning: For lifting, select another wire rope diameter, taking tensile strength into consideration. Minimum load required for winch to operate properly.
Lightweight POWER PULLER. With many applications when it comes to pulling, lashing and tensioning.
Properties
Safety factor 4.
Hooks equipped with safety latches.
Anti-slip safety handle.
Safe workload only with horizontal use.
Option
0310012 Wire pulling chain.
0310014 Barbed wire puller.
Note: Before use, check the steel cable for damage. Before use, check that the hooks are not bent out and the safety latches are still attached. Never extend the handle with a pipe for more power. Warning: NOT FOR LIFTING.
Lightweight and extremely robust POWER PULLER. Ideally suited for assembly work. With many application possibilities when it comes to pulling, lashing and tensioning.
Properties
Safety factor 4.
Hooks equipped with safety latches.
Anti-slip safety handle.
Non-conducting properties.
Safe workload only with horizontal use.
Option
Rope.
Note: Before use, check steel wire rope and flexible sheath for damages. Before use, check suspension and/or load hooks for tilting and for missing safety latches. Never use an extension pipe on the lever to exert a higher force on the puller.Warning: NOT FOR LIFTING.
The compact REMA TWZ and TWR winches are self locking; they are manufactured from pressed steel plate to ensure durable strength. These winches are utilized in many areas such as: food industry, maritime sector, poultry breeding, trailer manufacturing etc.
TWZ: Galvanized.
TWR: Stainless steel. (AISI 304)
Properties
Automatic load pressure brake that can hold loads at any desired height.
Double locking pawl system for extra safety (82 and 12 kg).
Drive and brake in an enclosed housing.
Demountable crank.
Simple wire rope equipment.
Standard delivery
Does not include wire rope.
Option
Steel wire rope with hook and safety latch.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 Warning: For lifting, select another wire rope diameter, taking tensile strength into consideration.
DL zinc winch only for pulling.
Properties
Demountable crank (DL-2500 en DL-3500).
Zinc-plated housing with zinc-plated drum (Model DL-35 is fitted with a black drum).
Hardened steel gears.
The DL-900A, DL-1000A and DL-1402A versions have a pawl that works in one direction with freewheel mode.
The DL-2500AB and DL-3500B versions have a double speed and are also equipped with a manually operated brake.
Standard delivery
Without cable.
Option
Steel wire rope with safety hook.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 Warning: Not suitable for lifting.
Properties
Braked design.
Crank gradually adjustable in length.
Drum and shafts provided with bearings.
Freewheel, through protected pawl system.
Powdercoating RAL2004.
Standard delivery
Does not include wire rope.
Option
Steel wire rope on request and hook with safety latch.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Properties
Construction according to DIN 152.
Braked design with double pawl system.
Crank gradually adjustable in length.
Drum and shafts provided with bearings.
Freewheel, through protected pawl system.
Powdercoating RAL 2004.
Standard delivery
Does not include wire rope.
Option
Steel wire rope on request with hook and safety latch.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
The REMA Gripper is a very robust wire rope hoist that can be used vertically, horizontally or at other angles, with a capacity of 800 kg, 1600 kg and 3200 kg. The shear pin and lever are reliable indicators for overloading.
Properties:
Accurate operation.
Virtually maintenance free.
The house is made of cast aluminum with a low own weight.
The safety pin breaks at approximately 25% overload.
The handle bends at about 50% overload.
The safety pin (s) can be replaced under load.
Spare safety pins are located in the carrying handle or in the operating handle (GP-0,8).
Standard delivery
Excluding wire rope.
Option
Steel wire rope, standard length is 20 meters.
Marking: According to standardStandard: EN 12100 , EN 13157 , EN 13414-1 , EN 12385-3 Note: Before use, check that the safety pins are in good condition. If the safety pin is broken, replace it. Before use, check that the steel cable is not damaged. Before use, check that the steel cable has been correctly inserted through both clamping jaws. Never use a longer lever or make the lever longer than the original one.
The flexible belt prevents damage to the material and controls the load.
Properties
Safety factor 4.
Hooks equipped with safety latches.
Anti-slip safety handle.
Non-conducting properties.
Safe workload only with horizontal use.
Note: Before use, check steel wire rope and flexible sheath for damages. Before use, check suspension and/or load hooks for tilting and for missing safety latches. Never use an extension pipe on the lever to exert a higher force on the puller.Warning: NOT FOR LIFTING.
Properties
Load pressure brake.
Adjustable crank length; backwind-free.
Drums and axes run on needle bearings.
Models above load capacity of 2 kg have two speeds, which is operated by changing the crank over.
Paint finish and enamel varnish are standard.
Standard delivery
Does not include wire rope.
Option
Steel wire rope on request.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100
Properties
Load pressure brake.
Adjustable crank length; backwind-free.
The drums and the shaft supported by needle bearings.
Paint finish and enamel varnish are standard.
Capacity min. 2%
Standard delivery:
Does not include wire rope.
Option:
Wire rope on request with hook and safety latch.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100
Price/quality ratio of series Rema® EWL electric self locking worm gear winches is very fair; they are available in designs complying with various classifications and norms.
Properties
Pulling force: 250 kg to 2800 kg.
Drums run on bearings at both sides (from model EWL 1000).
Steel base plate (from model EWL 1000).
Standard delivery
Does not include steel wire rope.
Does not include control pendant.
Above 1000 kg overload limiter is required.
Option
Steel wire rope.
Control pendant included switch box.
Overload limiter ( above 1000 kg required).
Maritime design on special order.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 Warning: Not suitable for lifting.
Electrical winch with remote control for loads up to 230 kg.
Lightweight and compact design: Allows easy installation.
Upper hoisting limit switch: When rope disc touches the limit arm, hoisting is automatically stopped.
Lower hoisting limit switch: Sensor arm automatically stops motor if the wire rope is under-wound.
Mechanical ratchet brake: Double ratchet pawls brake provide instant and safe braking.
Can operate on standard domestic power supply.
Wire rope comes with a safety-latch weight hook.
Emergency stop function switch is available upon request.
Power supply: 220V-240V x 1ph AC.
Braking methods: For motor: Electromagnetic, for gear: Double mechanical ratchets.
Remote control: Switch cord 10 m.
Option accessory: Crane CRH-0710.
Electric hoist for material lifting and pulling.
Proven technology in numerous applications.
The models of our Tirak™ X-type traction hoist are lighter and can therefore ideally be used when a low weight for the application is essential. The X models have only a single drive disc. The grip of the wire rope on the pulley is obtained by springloaded pressure rollers.
The advantage of the T type models is their ability to pull into both directions. The hoists of the T-series have two clamping wheels. The wire rope travels around the two pulleys along an „S“-path.
Technical details Tirak X- and T-type hoists for material handling:
Our Tirak models are available in following wire rope speed versions:
for X 300 to X 1530 (depending on model):
4,5 m/min, 9 m/min, 18 m/min, 4,5/9 m/min, 4,5/18 m/min, 9/18 m/min for X 3050 P:
6 m/min, 12 m/min, 6/12 m/min
Unlimited height of lift; the wire rope is not stored in the machine.
Compared to its capacity (up to 3.000 kg), the Tirak is very easy to handle and extremely compact, and may be simply moved from site to site.
Centrifugal brake for controlled descent in case of powerfailure.
Pendant control with up/down and emergency stop.
Cable length 3 m.
They can move loads to-and-from.
Extremely reliable: Less maintenance, higher productivity and better efficiency.
Compact design: Easy installation and incorporation in your specific application.
Light weight: This maximizes the usable workload for better efficiency.
Stability: Constant lifting torque and speed, independent from lifting height.
Flexibility: Power supply in your required voltage, or also air powered possible.
Note: Excl. wire (to be ordered separately).
The Minifor™ TR125 SY hoist is equipped with a special synthetic rope. It can be used to lift over great heights (standard rope length up to 200 m, longer ropes upon request). The torque is steady and speed is also stable at 30 m/min. The motor integrated brake makes it intrinsically safe in operation. The Minifor™ TR125 SY hoist is available with different voltages and is suitable for various applications. It is operated through a push button pendant control.
Options:
Plugin pendant control + 10, 15 or 25 m extensions cable.
Radio remote control.
Synthetic rope with hook 20 m. Other lengths on request.
Plastic storage box.
Combi Pro bag for rope storage.
Reeler for rope storage.
Note: Excl. wire (to be ordered separately).
Hand rope winch with transmission gear box for heavy loads, safety crank with folding handle, wall mounting.
Robust and safe.
Higher efficiency.
Self-locking, blow-back proof safety crank with folding handle.
Load reaction brake.
Maintenance free bearings.
Corrosion resistant.
Finish: painted.
Easy, space saving installation.
In compliance with the German Safety Regulations for Lifting and Pulling Equipment DGUV 54 (earlier BGV D 8).
Note: Excl. wire (to be ordered separately).