Extremely small and lightweight aluminum chain block. It weighs only approximately 50% of a similar standard chain block. The block can be used for lifting as well as pulling.
Features:
Safe - Each block is dynamic proof load tested 1,5 x WLL before leaving the factory
Compact, lightweight construction with aluminum covers
Durable construction with powder coated finish and plated frame parts
Chain block is chromium 6 free
Sealed bearings on the chain wheel maximize efficiency and serviceability.
Sprocket wheel surface treated against wear and corrosion
Safe and well covered automatic load reaction break
Equipped with double brake pawls
Fine calibrated European made load chain for smooth operation
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID (chip) equipped for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
14 language User Manual enclosed with each hoist
Spare parts available
Material: Durable aluminium/steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1
Chain Block POWERTEX Blackline PCB-S2 is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. The hoist is powder coated in matt black, and mounted with a black chain, which makes it perfect for use on stages and in the amusement industry.
The hoist is in a compact, lightweight construction.
Features:
Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory
Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation
Safe, well covered automatic load reaction brake
Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement)
Fine calibrated European made COROLIM® protected load chain for smooth operation
The unique surface treatment gives excellent corrosion protection and quiet run
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
Spare parts available
Option:
Chain bag
Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated body in matt black and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1
POWERTEX PLH-S2 Lever Hoist is a hoist of high quality which is durable and easy to operate using the ergonomic rachet lever. Compact, lightweight construction.
Features:
Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory
Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation
Safe, well covered automatic load reaction brake
Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement)
Fine calibrated European made COROLIM® protected load chain for smooth operation
Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3
The unique surface treatment gives excellent corrosion protection and quiet run
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
Spare parts available
Material: Durable all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated finish and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1
POWERTEX PCB-S2 Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain.
Features:
Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory
Compact, lightweight construction.
Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation
Safe, well covered automatic load reaction brake
Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement)
Fine calibrated European made COROLIM® protected load chain for smooth operation
Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3
The unique surface treatment gives excellent corrosion protection and quiet run
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
Spare parts available
Option:
Chain bag
Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1
POWERTEX PCB-S2OLP Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. The OLP hoists are factory equipped with Overload Protection device, which limits the maximum operating force that can be applied using the hand chain.
Features:
Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory
Compact, lightweight construction.
Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation
Safe, well covered automatic load reaction brake
Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement)
Fine calibrated European made COROLIM® protected load chain for smooth operation
Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3
The unique surface treatment gives excellent corrosion protection and quiet run
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
Spare parts available
Option:
Chain bag
Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1
POWERTEX PLH-S2OLP Lever Hoist is a hoist of high quality which is durable and easy to operate using the ergonomic ratchet lever. The OLP hoists are factory equipped with Overload Protection device, which limits the maximum operating force that can be applied using the ratchet handle.
Features:
Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory
Compact, lightweight construction
Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation
Safe, well covered automatic load reaction brake
Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement)
Fine calibrated European made COROLIM® protected load chain for smooth operation
Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3
The unique surface treatment gives excellent corrosion protection and quiet run
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
Spare parts available
Material: Durable all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated finish and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1
POWERTEX Chain bags are durable and designed to be easily mounted to chain blocks. They can contain up to 10 meter of chains.
Universal - Fits many brands and models of chain hoists in the market
Easy to mount without dismantling the hoist
Comes in two different sizes
The chain bags can be combined with POWERTEX Chain Block – both Blackline BK and standard S1 and S2 versions.
Blackline BK products are suitable to be used in theatres and entertainment industry.
Material: PVC-coated canvas, steel frame/holding pillars.Finish: Black.
Extremely small and lightweight aluminum chain block. It weighs only approximately 50% of a similar standard chain block. The block can be used for lifting as well as pulling. The hoists are factory equipped with overload protection device (OLP), which limits the maximum operating force that can be applied using the hand chain.
Features:
Safe - Each block is dynamic proof load tested 1,5 x WLL before leaving the factor
Compact, lightweight construction with aluminum covers
Durable construction with powder coated finish and plated frame parts
Chain block is chromium 6 free
Sealed bearings on the chain wheel maximize efficiency and serviceability.
Sprocket wheel surface treated against wear and corrosion
Safe and well covered automatic load reaction break
Equipped with double brake pawls
Fine calibrated European made load chain for smooth operation
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
14 language User Manual enclosed with each hoist
Spare parts available
Material: Durable aluminium/steel constructionMarking: According to standard, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1
Extremely small and lightweight aluminum lever hoist. It weighs only approximately 50% of a similar standard lever hoist. The hoist can be used for lifting as well as pulling. 250 kg-750 kg hoists are delivered with a handy carrying/belt bag.
Features:
Safe - Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory
Compact, lightweight construction with aluminum covers
Durable construction with powder coated finish and plated frame parts
Lever hoist is chromium 6 free
Sealed bearings inside maximize efficiency and serviceability.
Sprocket wheel surface treated against wear and corrosion
Safe and well covered automatic load reaction break
Equipped with double brake pawls
Fine calibrated European made load chain for smooth operation
Swivel hooks at both ends makes in line positioning easy
Hooks are designed to open at overload instead of breaking
Hooks fitted with heavy duty steel safety latches
Hook have Deformation Check Dots forged into side for overload detection
RFID equipped (chip) for easy service and inspection
QR code for on-site access to Multilanguage user manuals
Test certificate and Declaration of Conformity enclosed with each hoist
14 language User manual enclosed with each hoist
Spare parts available
Material: Durable aluminium/steel construction, rubber handleMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1
With the help of the REMA spring balancers, electric and pneumatic tools can be operated with minimal weight and posioned at the correct height.
Properties
Aluminum body.
Specially designed coil spring ensures a low-noise run.
Adjustable load capacity (button).
Carabiner attached.
Extra safety suspension, for safety chain.
Flexible stainless steel cable.
Resistance-free and wear-resistant cable guide.
Adjustable cable length.
Insulated suspension system.
Fixation at a point.
Bearing conical drum, this keeps the tension always the same.
Adjustable capacity through a screw.
Fixation of the desired cable length in several places by separate remote control.
Rotatable top hook with safety latch.
Applications
For working with heavy electric and pneumatic tools, measuring equipment etc.
On request:
Various spring balancers are also available in ATEX version. Ex II 2 GDc II T 85 ° (T 6).
Marking: According to standard, CE-markedStandard: EN 12100 , DIN-EN 15112
The Rema® RIH hand hoist is a robust manual chain hoist made entirely of stainless steel, which is suitable for use in the food industry or other environments wherethere is high humidity and there is sensitivity to corrosion.
Properties
Suitable for highly corrosive environments or dust-free rooms - clean room environment
Maximum protection against corrosion
Load and hand chain AISI 316
Cover caps AISI 304
Stainless steel components
Hooks and load chain wheel, plates: AISI 304
Electrolytically polished surface.
Standard delivery
3 meters lifting height (max. between top and bottom hook).
2.5 meters operating height.
Options
Available in any other lifing and operational heights.
Stainless steel trolley.
Material: Stainless steel AISI-316 and AISI-304Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7
The Rema® YA lever hoist is an extremely robust lever hoist for hoisting, pulling, tensioning and lashing in all directions. With one simple action the lever hoist can be set in its freewheel.
Properties
Very low self weight, compact dimensions.
The rotatable top and bottom hook are provided with safety latches.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Self locked brake that holds the load at any desired height.
Freewheel is possible in unloaded condition.
Freewheel by one simple action.
The hoist is fitted with a rubber anti-slip handle.
Galvanized load chain (Grade 10).
Standard delivery
1,5 m lifting height (max distance between top and bottom hookpositions).
Option
Available in other lifting heights.
Marking: According to standard, CE-markedStandard: EN 818-7 , EN 13157
The Rema® Beta 230 VAC electric chain hoists are light weight, compact and ideal for light installation work.
Properties
Slip clutch for overload prevention
Self-locking brake that will hold the load at any required height
Very low own weight, only 7.5 kg.
Very compact.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Grade 10 load chain.
Technical specification:
Insulation class B.
FEM 9.511 motor: 1Am.
Power supply 230VAC.
Protection class IP54
Control power supply 230VAC direct control.
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable, direct control.
3 m power cable.
Chain bag max 10 m.
Trolley not included.
Option
Other hoisting and operating height is also possible.
Push trolley.
Marking: CE-marked
The 400 V electric chain hoists are extremely solid and have a robust sheet steel housing. Very popular as it is ready to use with limit switches, 24 V control voltage, controlunit and plug connections. The high duty cycle and high lifting speed ensure trouble-free operation and a long service life.
Properties
Slip clutch against overload.
Brake that holds the load at any desired height.
Limit switches for highest and lowest hook positions.
Operation 24 Volt control voltage.
Power and control cables are equipped with plug connection.
Phase protection against incorrect rotation of the motor.
Galvanized load chain, Class DAT (Grade 8).
Operating voltage 400 VAC / 50 Hz.
In case of overload, the hooks will gradually bend and do not suddenly break off.
1 speed.
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable.
Limit switches highest and lowest hook position.
Push-button 24 V control unit.
4 m power cable.
Plastic chain bucket for 3 m lifting height.
Trolley not included.
Option
Increased lifting and/or control height.
Larger chain bucket > 3 m lifting height.
Radio remote control.
Push / electric trolley.
440 V / 60 Hz on request
Marking: According to standard, CE-markedStandard: EN 818-7 , EN 12100 , EN 14492
Model Rema® H-100 is a robust hand chain hoist designed for heavy and increased loads, bearing safety, ergonomics and low operating effort in mind.
Properties
Low operating effort at full load due to bearing shafts.
Double brake pawl system.
Self-locking brake that can hold loads at any desired height.
Suspension and load hooks equipped with safety latches.
The load hook will yield under overload instead of breaking.
Zinc-plated load chain (grade 8 in compliance with EN 818-7).
Zinc plated hand chain.
Reliable steel plate housing in orange finish.
Standard delivery
3 m hoisting height.
2,5 m operating height.
Option
Available in any other hoisting and operational heights.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7
The Elephant ALCMS 400 V electric chain hoists are compact and assembled with an electric trolley. Wide availability due to the high duty cycle in combination with a high hoisting speed.
Properties
Slip clutch against overload.
Self-locking brake that holds the load at any desired height.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Galvanized load chain, class DAT (Grade 8).
Technical specification chain hoist
Insulation class E.
FEM 9.511 motor: 2m.
Power supply 400VAC - 50Hz.
Protection class IP54.
Technical specification trolley
Travel speed trolley 10 m / min
Trolley flange width 75-125 mm.
Protection class IP54
Motor power 0.4 kW
Operating voltage 400V - 50Hz
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable.
24V pendant control station.
4 m power cable.
Plastic chain bucket up to 6 m chain, from 6 m chain bag.
Included electric trolley.
Option
Other hoisting and operating height is also possible.
Larger chain bag > 3 m.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7
The new Rema® series SR is an advanced-design electric chain hoist exhibiting such important features such as the very high duty cycle and modular assembly.
Properties
4 V, 3 phase 5 Hz, Isolation class F - direct control.
Attractive appearance, low constructional height.
Very high duty cycle thanks to an air-cooled hoisting motor used.
Easy repair & maintenance due to modular design.
The patented slip-type clutch unit meets all the safety requirements, thus loads will not fall even clutch malfunction or overload.
Brake holds loads at any desired height.
As a result of modular design, the motor, the encapsulated drive, the brake and the drive motor can be replaced independently.
Easy converting from single chain to double chain due to patented chain end locking.
Zinc-plated load chain.
DAT grade 8 complies with EN 818/7.
Standard delivery
3 m lifting height (max distance between top and bottom hook).
Control height of 1,8 meter.
1 m power cable.
Chain container.
Trolley not included.
Option
Higher lifting and control heights.
Chain containers of larger capacity.
Other operating voltages and frequencies are available.
Push or electric trolley.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7
The Rema® X-Line hand hoist is the solution for all demanding lifting tasks. With low operating force and increased safety system, you work efficiently and safely. The asbestos-free friction discs and wear-resistant load chain make use even more comfortable. The gradual bulging under overload and the orange powder coating provide additional safety and visibility. Available from 3 meters lifting height and 2.5 meters operating height, the Rema® X-Line hand hoist is suitable for any demanding task.
Properties
Low operating force at full load.
Increased operational safety due to double pawl system.
Brake is provided with astbestos free friction discs.
Load chain wheel is made of wear-resistant alloy steel.
Top and bottom hook have safety latches.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Galvanized load chain (Grade 8).
Galvanized hand chain.
Steel housing with orange colored powder coating.
Standard delivery
3 meters lifting height (max. between top and bottom hook).
2.5 meters operating height.
Option
Available in any other hoisting and operational heights.
Norm:
EN12100-1/2, EN13157, EN818-7
Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7
The Rema® Alpha 230 V electric chain hoists are compact and have a very low weight (aluminum housing). Popular hoist due to the high duty cycle in combination with a high lifting speed.
Properties
Slip clutch against overload.
Self-locking brake that holds the load at any desired height.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Galvanized load chain, class DAT (Grade 8).
Type description:
ALH = 1 speed lifting.
ALHB = 2 speed lifting.
ALHV = Variable speed.
Technical specification:
Insulation class B.
FEM 9.511 motor: 1Am.
Power supply 230VAC.
Protection class IP54
Control power supply 230VAC direct control.
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable, direct control.
4 m power cable.
Plastic chain bucket up to 6 m chain, from 6 m chain plastic bag.
Trolley not included.
Option
Other hoisting and operating height is also possible.
Larger chain container > 3 m.
Radio remote control.
Push trolley.
Marking: According to standard, CE-markedStandard: EN 818-7 , EN 14492 , EN 12100
The 400 V electric chain hoists are extremely solid and have a robust sheet steel housing. Very popular as it is ready to use with limit switches, 24 V control voltage, controlunit and plug connections. The high duty cycle and high lifting speed ensure trouble-free operation and a long service life.
Properties
Slip clutch against overload.
Brake that holds the load at any desired height.
Limit switches for highest and lowest hook positions.
Operation 24 Volt control voltage.
Power and control cables are equipped with plug connection.
Phase protection against incorrect rotation of the motor.
Galvanized load chain, Class DAT (Grade 8).
Operating voltage 400 VAC / 50 Hz.
In case of overload, the hooks will gradually bend and do not suddenly break off.
2 speed.
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable.
Limit switches highest and lowest hook position.
Push-button 24 V control unit.
4 m power cable.
Plastic chain bucket for 3 m lifting height.
Trolley not included.
Option
Increased lifting and/or control height.
Larger chain bucket > 3 m lifting height.
Radio remote control.
Push / electric trolley.
440 V / 60 Hz on request
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7
Safety factor of at least 4.8 or higher. Very compact and light body, 5.5 kg, 0.5 ton, easy to carry. Strong and dimensionally stable housing due to high-quality metal. Durable brake discs guarantee a longer life. The strongest hoist load chain B39VH, Grade 10. High quality solid forged hooks equipped with a strong and stable safety latch for even more safety.
Properties
Ideal manual chain hoist for assembly work due to its low weight.
Galvanized load chain with high tensile strength, Grade 10 according to EN 818/7.
Compact design.
Reliable load pressure brake that holds the load at any height.
Hooks fitted with safety flaps.
Patented guide for the load chain.
Equipped with a double ratchet spring for extra safety.
Load hooks bend gradually when overloaded and do not break abruptly.
Galvanized hand chain.
Standard delivery
3 m lifting height.
2,5 m operating height.
Option
Available in any other hoisting and operational heights.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7
Series SR 230 V electric chain hoists are available in several designs and they have the same advantages as standard 400V models i.e. safety slip clutch/brake assembly, low construc-tional height etc. For the 1-phase connection, wire having a minimum cross-section of 2.5 mm². For power distribution at building sites, use connection cables of as short as possible to minimize voltage drop.
Properties
230VAC, 1 phase, 50Hz, connection is to made using a wire of at least 2.5 mm².
24VAC control voltage including limit switch up and down.
Advanced motors having high thermal load capacities.
Long switch-on periods to facilitate high lifting height.
Maximum safety due to the patented slip clutch/brake assembly.
The brake holds loads at any desired height.
At the top and bottom hook positions, switch-off at limit points is ensured byu a slip clutch.
Mounted with a fixed suspension or combined with a hand-driven trolley.
Load chain (grade 8 in compliance with EN 818/7).
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable with push-buttons 24VAC
Includes limit switches.
1 m power cable.
Chain bag.
Trolley not included.
Option
Any other hoisting and operating height is also possible.
Larger chain bag.
Radio remote control.
Thermal protection against electrical overload.
Pushing or electric trolleys.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7
Rema® SR is technically advanced electric chain hoist with the most important advantages being the very high duty cycle and modular construction.
Properties
400 V, 3 Ph, 50 Hz, 24 V control voltage IP 55, isolation class F.
Equipped with limit switches for highest and lowest hook position.
Very low construction height
Very high duty cycle due to air-cooled motor.
User-friendly and maintenance-friendly due to modular design.
Patented braking system that holds the load at any desired height.
Slip clutch against overload.
Due to the modular design, the motor, closed drive, brake and drive motor can be replaced independently of each other.
Simple and quick to build from single-fall to double-fall hoist.
Load chain Class DAT (Grade 8).
Standard delivery
3 m lifting height (max distance between top and bottom hook).
Control height of 1,8 meter.
Hoist equipped with thermal overload protection
*Model 110/111 supplied with one hole suspension plate.
1 m power cable.
Chain container.
Trolley not included.
Option
Higher lifting and control heights.
Chain containers of larger capacity.
Other operating voltages and frequencies are available.
Cordless remote control.
Push or electric trolley.
Marking: According to standard, CE-markedTemperature range: Hoist equipped with thermal overload protectionStandard: EN 12100 , EN 14492 , EN 818-7
The Rema® Select 200 OD is equipped with an overload protection from 500 kg. It is a robust manual chain hoist for heavy and intensive use where safety, ergonomics and a low operating effort are paramount.
Properties
The new innovative overload protection ensures an improved safer operation of the hoist.
Overload device system makes it possible to lower the load in a controlled way.
Equipped with a double pawl system.
Brake is provided with astbestos free friction discs.
Top and bottom hooks are equipped with a robust latches.
Load hooks gradually bend and do not break off suddenly.
Galvanized load chain Grade 8.
Galvanized hand chain.
Standard delivery
3 meters lifting height (max. between top and bottom hook).
2.5 meters operating height.
Overload protection from 500 kg up to 10.000 kg.
Option
Available in any other hoisting and operational heights.
Chain bucker available up to 10 meter lifting height from 500 kg till 2000 kg.
Short height in combination with REMA 211/212 trolley bij intermediate link, which replace the top hook.
Warning
* = without overload protection.
Norm:
EN12100-1/2, EN13157, EN818-7
Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7