The POWERTEX Foundry Hook FH is designed for the assembly of chain slings where wide throat openings are necessary. It is part of the Powertex G10 Lifting Sling Chain Components range. Available for chain size 6 mm up to 16 mm and WLL 1.4t up to 10t. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (FH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Warning: Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.Safety factor: 4:1Grade: 10

Stainless Steel Thimble PT316 from POWERTEX, intended for stainless steel wire rope slings and synthetic rope end terminations. Wire rope size 2,5 – 20 mm. Material: Stainless Steel AISI 316L PlateMarking: PX (Powertex), Recommended rope diameter, 316 (Model) Finish: Polished

POWERTEX Trucker lashings are available as endless or 2-part lashings and used for professional haulers. Heavy duty lashing made of high strength polyester yarn and steel ratchets and hooks Suitable for professional transporters looking for extra high strength and durability Strong and durable with LC 2500  daN and STF 350 daN Webbing having min breaking strength of 7500 daN Blue webbing with 5 + 5  black stripes for easy identification Both long part and short part carry blue identification labels Label gives information on STF and lashing capacity for different lashing connections Each part is marked with a unique serial number for safe equipment registration The blue information label is protected by additional layer of transparent plastic for long life Year/Month calendar printed on the label where latest inspection date can be marked or punched All lashings carry a white label with important warning instructions and user instruction pictogram Each lashing marked with QR code to access full user manual Cr6 free galvanization – better for health and environment Trucker can be supplied with other lengths and other end fittings on request. Safety factor: Webbing min. 3, Rachets min. 2 and Hooks min. 2 Material: Polyester and steelMarking: According to standard, POWERTEX, LC, STF, length, manufacturing year, batch number, serial number, QR code, inspection calendar, user warning instructionsTemperature range: -40°C up to +120°CStandard: EN 12195-2 Note: Protect the lashings from sharp edges

P0902 is a basic fall arrest harness that is safe, light and easy to put on.  Anchoring: Back and chest positioning. Hand-washing: Up to 40°C. Marking: According to standard, CE-marked, Supplier symbol, product id, size/length, production date, reference no, serial no.Temperature range: -35ºC to +45ºC.Standard: EN 361

The Powertex FL-1 flexible lanyard is equipped with a shock absorber and is approved for 140 kg use. This lanyard is elastic, allowing it to stretch per the user's movements. The lanyard is securely sewn to a shock absorber pack, which includes a screw gate steel carabiner for attachment to a harness. Sewn-in double-action aluminum scaffold hooks provide reliable anchorage on the other end of the lanyards. In the unlikely event of a fall, the shock absorber pack will rupture to absorb the energy of the fall. If this happens it reveals a white webbing that serves as a fall indicator. This feature lets users quickly identify if a lanyard has been used in a fall and must be removed from service. The FL-1 flexible lanyard is manufactured to the highest standards and is designed to provide reliable fall protection for those who work at heights. It's also RFID-equipped (HF 13,56 MHz chip) for easy service, inspection, and asset control. Carabiner: Screw gate carabiner (23 kN) acc to EN 362 marked with serial number Scaffold hooks: Double action scaffold hook with eye (23kN) acc to EN 362 with 60 mm opening. Hand washing: Allowed up to +40°C with mild detergent. Features: CE & UKCA approved.Material: Polyester lanyard, Polyester shock absorber, Steel carabiner, Aluminum scaffold hooks Marking: According to standard, CE-marked, UKCA-marked, Supplier symbol, Product identification, Max weight, Length (Nom), Length (Max), Production date, Serial number.Temperature range: -35°C up to +50°CStandard: EN 355

POWERTEX cam buckle lashings are suitable for fast lashing and for keeping items together. The display box contains 32 pcs mini lashings in different lengths and colours: 8 pcs. of each (1 m red, 2 m orange, 3 m blue and 5 m black). Material: Polyester webbing and zink casted cambuckleMarking: According to standard, POWERTEX, LC, length, manufacturing year, batch number, serial number, inspection calendarTemperature range: -40°C up to +120°CStandard: EN 12195-2 Note: Protect the lashings from sharp edges

Warning vest with integrated fall arrest harness. Anchoring: Back and chest positioning. Hand-washing: 40°C. Marking: According to standard, CE-marked, Supplier symbol, product id, size/length, production date, reference no, serial no.Temperature range: -35ºC up to +45ºC.Finish: Yellow.Standard: EN 361

Fall arrest harness with integrated warning vest. Anchoring: Back and chest positioning. Hand washing: Up to 40°C. Marking: According to standard, CE-marked, Supplier symbol, product id, size/length, production date, reference no, serial no.Temperature range: -35ºC up to +45ºC.Finish: Orange.Standard: EN 361 , EN ISO 20471

POWERTEX PCB-S2 Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction. Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Option: Chain bag Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

The POWERTEX Master Link assembly MA is part of the range of Powertex G10 Lifting Sling Chain Components. The assembly MA is to be used as the top ring for three-leg and four-legged chain sling assemblies. Available for 6 mm up to 22 mm chain and from WLL 3t up to WLL 40t. All models are welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MA-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

POWERTEX PLH-S2 Lever Hoist is a hoist of high quality which is durable and easy to operate using the ergonomic rachet lever. Compact, lightweight construction. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Material: Durable all steel constructionMarking: According to standard, CE-marked, POWERTEX, Model, WLL,  Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Powder coated finish and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

The POWERTEX Self-Locking Hook with slide bearing swivel is part of the Powertex G10 Lifting Sling Chain Components range. The self-locking hook closes and locks itself when lifted, making it a safe lifting hook. The hook can be opened by pressing the pawl on the back of the hook. The latch can not be removed. The eye has a slide-bearing swivel and can be rotated when the hook is unloaded, enabling positioning before lifting.   Available for 6 mm up to 20 mm chain and from WLL 1.4t up to WLL 16t. Also available with ball bearing (POWERTEX SLS-B). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SLS-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-3 (+ 25% WLL)Safety factor: 4:1Grade: 10

The POWERTEX HW PLUS fall arrest harness is very comfortable and offers higher capacity than the standard with 140 kg user capacity. It is well-designed with a comfortable waist belt and equipped with soft shoulder/back and waist paddings. The harness is very quick and easy to put on using high-quality click buckles in the chest, waist, and leg positions. On top of all that, the webbing is entirely made of recycled polyester (r-PET), making this harness also an excellent choice for customers who care about the environment and are looking to improve their sustainability performance.  Because of this sustainability enhancement, this product is approved to be part of Lifting Solution Group's Aspire range™. Features: Made from OEKO-TEX® approved fiber, the material is free from hazardous chemicals and made from recycled material. Innovative webbing provides a 14 times reduction in bacterial growth when compared with standard webbing High tensile steel D-rings in the back and front for anchoring. Padded work positioning belt with tool holders in the back. Positioning D-rings on the side of the waist belt. Click buckles with a color indicator showing if the buckle is safely locked. Max load of 140 kg allows higher user weight compared to standard harnesses. Fall indicators in the back will indicate if the harness has been exposed to shock forces (fall). RFID equipped (HF 13,56 MHz chip) for easy service, inspection, and asset control. Anchoring: Back, chest.  Hand-washing: Up to 40°C with mild detergent. Features: All webbing is made from recycled polyester (r-PET)Material: OEKO-TEX® approved ECO fiber.Marking: According to standard, CE-marked, UKCA-marked, supplier symbol, product identification, size/length, production date and serial number.Temperature range: -35°C up to 50°CStandard: EN 358 , EN 361

The POWERTEX Master Link assembly MAW (Wide) is part of the range of Powertex G10 Lifting Sling Chain Components. The MAW assembly features wider toplinks and sublinks, making it ideal for larger hooks and steel wire rope slings with thimble eyes. It serves as the top assembly for both three-leg and four-legged chain sling or steel wire rope sling assemblies. Available for 6 mm up to 16 mm chain and from WLL 3t up to WLL 21.2t. All models are welded. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (MAW-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-4 (+25% WLL)Note: All models are weldedSafety factor: 4:1Grade: 10

POWERTEX PCB-S2OLP Chain block is a hoist of high quality which is durable and easy to operate using the ergonomic hand chain. The OLP hoists are factory equipped with Overload Protection device, which limits the maximum operating force that can be applied using the hand chain. Features: Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction. Sprocket wheel equipped with needle bearings and drive shaft supported by needle bearing and slide bearing inside to ensure smooth and efficient operation Safe, well covered automatic load reaction brake Equipped with 2 brake pawls and 4 brake springs (double safety compared to EN 13157 requirement) Fine calibrated European made COROLIM® protected load chain for smooth operation Corrosion resistance of the chain is equivalent to ISO944-9 C5High / ISO9223 C3 The unique surface treatment gives excellent corrosion protection and quiet run Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist Spare parts available Option: Chain bag Material: Durable all steel constructionMarking: According to standard, CE-marked, UKCA-marked, POWERTEX, Model, WLL, Chain, Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: Red powder coated body and plated frame componentsStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Extremely small and lightweight aluminum lever hoist. It weighs only approximately 50% of a similar standard lever hoist. The hoist can be used for lifting as well as pulling. 250 kg-750 kg hoists are delivered with a handy carrying/belt bag. Features: Safe - Each hoist is dynamic proof load tested 1,5 x WLL before leaving the factory Compact, lightweight construction with aluminum covers Durable construction with powder coated finish and plated frame parts Lever hoist is chromium 6 free Sealed bearings inside maximize efficiency and serviceability. Sprocket wheel surface treated against wear and corrosion Safe and well covered automatic load reaction break Equipped with double brake pawls Fine calibrated European made load chain for smooth operation Swivel hooks at both ends makes in line positioning easy Hooks are designed to open at overload instead of breaking Hooks fitted with heavy duty steel safety latches Hook have Deformation Check Dots forged into side for overload detection RFID equipped (chip) for easy service and inspection QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each hoist 14 language User manual enclosed with each hoist Spare parts available Material: Durable aluminium/steel construction, rubber handleMarking: According to standard, CE-marked, POWERTEX, Model, WLL, Chain type , Serial number, User manual/QR codeTemperature range: -10°C up to +50°CFinish: White powder coated body, side plate assembly and hooks black powder coatedStandard: EN 13157 , EN 818-7 Safety factor: 4:1

Dee type shackle PDSB is a high quality shackle intended for use in demanding environments. It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin. The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 3, Grade A. Features: Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889 All bodies and bolts are marked with batch number for traceability The body is forged in closed dies All parts are made from alloy steel being quenched and tempered All parts including bolts and nuts are hot dip galvanized for long life High quality hot dip galvanization process giving an exclusive mat grey finish Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts Retaining pins made from stainless steel Multilanguage user manuals Material: Forged alloy steel, supplied with alloy safety bolt and nuts. Stainless steel retaining pinsMarking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1.Grade: 6

The POWERTEX HW COMFORT is an all-around harness for fall arrest safety. It is light, comfortable, and offers higher capacity than many others with 140 kg user capacity. It is well-designed and equipped with soft shoulder paddings. The harness is very quick and easy to put on using high-quality click buckles in the chest and leg positions. On top of all that the webbing is fully made of recycled polyester (r-PET), making this harness also an excellent choice for customers who care about the environment and are looking to improve their sustainability performance.  Because of this sustainability enhancement, this product is approved to be part of Lifting Solution Group's Aspire range™. Features: Made from OEKO-TEX® approved fiber, the material is free from hazardous chemicals and made from recycled material. High tensile steel D-rings in the back and front for anchoring. Click buckles with a color indicator showing if the buckle is safely locked. Max load of 140 kg allows higher user weight than standard harnesses. Fall indicators in the back will indicate if the harness has been exposed to shock forces (fall). RFID equipped (HF 13,56 MHz chip) for easy service, inspection, and asset control. Anchoring: Back and chest. Hand-washing: Up to 40°C with mild detergent. Features: All webbing is made from recycled polyester (r-PET)Material: OEKO-TEX® approved ECO fiber.Marking: According to standard, CE-marked, UKCA-marked, supplier symbol, product id, capacity, production date and serial number.Temperature range: -35°C up to 50°CStandard: EN 361

POWERTEX Endless webbing sling PWS are made from high strength polyester yarn. The PWS slings are color coded for quick and easy identification of the Working load limit. Only standard slings with full ton WLL are shown in the chart, but PWS slings can be delivered with any WLL and length on request. Safe – All Powertex PWS standard slings are made from high strength industrial polyester and tested in accordance to EN 1492-1 Flat woven webbing Each slings carry a blue label giving correct WLL for different load connection methods and angles Each sling is marked with a unique serial number for safe sling registration Year/Month calendar printed on the label where next inspection date can be marked or punched All slings carry a white label showing pictogram with important user warning instructions QR code for on-site access to Multilanguage user manuals Test certificate and Declaration of Conformity enclosed with each box Chemical resistance: Resistant to most acids, but not strong alkalizes. Stretch at working load: 2-3%. Length tolerance: Nominal length (EWL) ± 3%. Material: PolyesterMarking: According to standard, CE-marked, POWERTEX, WLL, EWL, manufacturing year, batch number, sling’s unique serial number, QR code, Inspection calendar, user warning instructionsTemperature range: -40°C up to +100°C.Standard: EN 1492-1 Note: According to EN 1492-1:2000+A1:2008: D.3.7: Slings should be protected from edges, friction and abrasion, whether from the load or the lifting appliance. Where reinforcements and protection against damage from edges and/or abrasion is supplied as part of the sling, this should be correctly positioned. It may be necessary to supplement this with additional protection.Safety factor: 7:1

The POWERTEX Sling Hook with eye is part of the Powertex G10 Lifting Sling Chain Components range. The sling hook is very easy to use and can be attached rapidly to lifting points. The hook has a solid latch. Available for 6 mm up to 32 mm chain and from WLL 1.4t up to WLL 40t. Also available as clevis type (POWERTEX SHC). Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (SH-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-2 (+ 25% WLL)Safety factor: 4:1Grade: 10

Cam buckle Mini web lashings. Available in different colours and lengths from 0,6 – 5,0 m. Webbing width is 25 or 35 mm. Suitable for fast lashing and for keeping items together. Material: Polyester webbing and zink casted cambuckleMarking: According to standard, POWERTEX, LC, length, manufacturing year, batch number, serial number, inspection calendarTemperature range: -40°C up to +120°CStandard: EN 12195-2 Note: Protect the lashings from sharp edges

POWERTEX Handy web lashings are available as endless or 2-part lashings which suits almost all situations for light and mid weight transports. Flexible and durable lashings made of high strength polyester yarn and steel ratchets and hooks. Suitable for roof-racks, trailers and pickups. Strong and durable with LC 1000 daN and STF 200 daN Orange webbing with 2 black stripes for easy identification Both long part and short part carry blue identification labels Label gives information on STF and lashing capacity for different lashing connections Each part is marked with a unique serial number for safe equipment registration Year/Month calendar printed on the label where next inspection date can be marked or punched All lashings carry a white label with important warning instructions and user instruction pictogram Each lashing marked with QR code to access full user manual Cr6 free galvanization – better for health and environment Handy can be supplied with other lengths and other end fittings on request. Safety factor Webbing min. 3, Rachets min. 2 & Hooks min. 2 Material: Polyester and steelMarking: According to standard, POWERTEX, LC, STF, Length Manufacturing year, Batch number, Serial number, QR code, Inspection calendar, User warning instructionsTemperature range: -40°C up to +120°C.Standard: EN 12195-2 Note: Protect the lashings from sharp edges

Our smart chain sling system in Grade 10 consists of 1-leg and 2-leg slings that can be used directly from the box. The smart slings can instantly be combined on the crane hook to lift loads that require 3 or 4 legs to be used. Features: Multifunctional chain slings Grade 10 packed in box having all necessary markings and documents and ready for use The smart stainless steel sling tag gives information of the WLL for the sling as configurated, but also when used in any 1-4 leg PCSB combination Two 1-leg or 2-leg PCSB slings can easy and safely be combined on the crane hook to perform 2-leg, 3-leg and 4-leg lifting operation thanks to the smart sling tag 2-leg slings can also safely be used in a 1-leg lifting operation as adequate information is given on the smart sling tag (Non-used leg should be hooked to the master link to avoid snagging) +25% higher lifting capacity (WLL) compared to standard Grade 8 slings Light weight thanks to the smart, multifunctional top com­ponents Cost effective compared to conventional slings thanks to use of multifunc­tional components Shortening function is integrated in the master link connector allowing the chain legs to be adjusted instantly Shortening can be made from either side of the shortener which is a safety advantage compared to shortening clutch. No reduction of WLL when shortening the chains thanks to the well-designed shortening pockets Robust self-locking safety hooks are standard Safe - Each welded master link and chain link is proof load tested in the factory 2,5 x WLL prior delivery Safe - Each hook and forged coupling component is crack detection tested and samples are proof load tested in factory prior delivery Components are fatigue rated to +20,000 cycles at 1.5 times the WLL acc to EN-1677 standards Each component is marked with traceability code that gives full traceability to the raw material European made lifting chains The chains are stamped with traceability code that gives full traceability to the raw material The chain slings are chromium 6 free The slings are equipped with a drop shaped stainless RFID tag (HF 13,56 Mhz) QR code for on-site access to Multilanguage user manuals Fulfills EN 818-4 (+25 % WLL) and the Machinery Directive 2006/42/EC POWERTEX 2.2 Certificate & EC Declaration of Conformity in 14 languages enclosed POWERTEX User Manual in 14 languages enclosed Material: Quenched and Tempered Alloy Steel of Grade 10 qualityMarking: According to standard, CE-marked, WLL, Chain size, Length, Grade 10, Serial number, MFG date, QR code leading to user manual Temperature range: -40ºC up to +200°C without reduction of WLLFinish: Painted blueStandard: EN 818-4 (+ 25% WLL) and ASTM A973Safety factor: 4:1Grade: 10

The POWERTEX Grab Hook with clevis is part of the Powertex G10 Lifting Sling Chain Components range. The Grab Hook is used for shortening lifting chains, and adding them to an assembly makes the lifting chain assembly much more versatile. It enables full WLL because the support wings prevent the lifting chain from deforming. Available for 6 mm up to 22 mm chain and from WLL 1.4t up to WLL 19t. Also available as Grab Hook with eye (GH) instead of the clevis connection. Powertex G10 Range benefits: 25% higher capacity compared to traditional Grade 8 components All POWERTEX G10 components are powder painted in luminous red Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings The components meet EN 1677 part 1/2/3/4 +25% WLL Each forged component is crack detection tested, and samples are proof load tested. Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL Full traceability through a batch number Replacement spare parts available All components are chromium 6 free POWERTEX 2.2 certificate enclosed with each box of components The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4. Marking: According to standard, POWERTEX + Model (GHC-6-10) + traceability code.Temperature range: -40°C up to +200°C without reduction in WLLFinish: Powder painted in luminous redStandard: EN 1677-1 (+ 25% WLL)Safety factor: 4:1Grade: 10