HFN push trolley
326.35 €*
WLL:
0.5
REMA HFN trolleys can only be assembled together with the REMA SR electric chain hoists.
Properties
Double axle design.
Wheel rupture supports and anti-surge devices.
Equipped with steel machined wheels.
Assembly and suspension plates not included.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 Note: Allways mention the right flange width in mm.
Safety retaining rope
86.15 €*
Length:
1.5
Properties
Article-No. 1730140 has 1 carabiner on one side and a loop on the other side.
Article-No. 1730121 has 1 large and 1 small hook
Article-No. 1730180 is adjustable by the buckle between 1.4 and 2.0 m.
Marking: According to standard, CE-markedStandard: EN 354
Overload limiter REMA HF, for wire ropes
0.00 €*
WLL:
3.2
Working principle: The deviation of the cable caused by the intervention of the sensor causes a tangential force that is proportional to the force exerted on the traction cable. In the event of an overload, a microswitch integrated in the sensor is pressed and stops. the electric wire rope hoist.
Technical specifications
Basic version: for cables from 4 to 35 mm.
Measuring sensor: integrated microswitch.
Installation: directly on the fixed part.
Sensor material: aluminum of aviation quality.
Surface treatment: colorless anodising.
Calibration system: by micrometric screw.
Switching voltage: max 220 VAC.
Switching current: max 5 Amp.
Accuracy: 5% of EM.
Operating temperature: from -30 ° to + 80 ° C.
Protection class: IP40.
Maintenance: none.
Connection: 3-wire electricity cable.
Electrical output: contact plug.
Length of cord: 2 meters, option 5 meters.
Application
This overload protection is specifically designed for overhead cranes with multiple parts.
Option
IP65.
Marking: CE-marked
PT Pallet truck
1,170.62 €*
WLL:
2.5
The new REMA PT pallet trucks fitted with pump (model 25) are very manoeuvrable and user-friendly. The tandem fork rollers are advantageous when using these pallet truck on a less smooth floor. Single truck roller designs are frequently used in the transport sector (rubber steer wheels and polyurethane rollers).
Properties
Quick-Lift pump (model 25) for a quick lifting of pallets.
The pump unit has an overload protection function.
A chromate-coated and polished piston rod provides a long life for the hydraulic cylinder.
Operation:
All pump functions can be operated precisely by means of the three-position control lever.
Variable lowering speed even under load.
The tow bar will automatically return to vertical position.
Fork:
The robust plate steel fork profiles have flattened ends and they are fitted with in- and outrunning rollers to move pallets easier.
Optional footbrake:
Optional only for the polyurethane and rubber steering wheels.
The brake can be operated with a simple foot movement, for both locking and unlocking the brake.
An advantage is that the pallet truck can remain in the highest position, e.g. on a tailgate (inclined angle), since the steering wheels are blocked.
This prevents unnecessary lifting / pumping of a pallet.
If you already own a Rema PT pallet truck, it is possible to provide the pallet truck with the foot brake, it can be retrofitted and ordered separately.
Technical specifications:
Highest fork position: 200 mm.
Steering wheel: 200 mm.
Fork rolls: 82 mm.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 3691-5 , EN 1757-2
RWSH Webbing sling hook with safety latch
36.23 €*
WLL:
1
The REMA sling hook is ideal to use in combination with webbing slings and round slings.
Properties
Powder coated in the color of the sling
Marking: According to standardStandard: EN 1492-1 , EN 1492-2 , EN 1677-1
RKL Elephant round cable trolley
54.35 €*
Elephant round cable trolleys are designed to relieve round power cables on cranes so that they do not hang down along the track. Cable sagging approx. 60 to 1000 mm.
Properties
Easy and simple to mount on a monorail, wall or column crane.
Types
RKL 75-125 for rail or beam profile width from 75 to 125 mm.
RKL 125-175 for rail or beam profile width from 125 to 175 mm.
Marking: CE-marked
RIH stainless steel hand chain hoist
5,789.23 €*
WLL:
0.5
|
Lifting height m:
3
The Rema® RIH hand hoist is a robust manual chain hoist made entirely of stainless steel, which is suitable for use in the food industry or other environments wherethere is high humidity and there is sensitivity to corrosion.
Properties
Suitable for highly corrosive environments or dust-free rooms - clean room environment
Maximum protection against corrosion
Load and hand chain AISI 316
Cover caps AISI 304
Stainless steel components
Hooks and load chain wheel, plates: AISI 304
Electrolytically polished surface.
Standard delivery
3 meters lifting height (max. between top and bottom hook).
2.5 meters operating height.
Options
Available in any other lifing and operational heights.
Stainless steel trolley.
Material: Stainless steel AISI-316 and AISI-304Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7
HRA Fall arrester with rescue winch
1,658.37 €*
Length:
12
In the event of a possible fall, the person can be quickly and safely secured by means of the rescue winch on the fall arrest device.
Properties
Aluminium housing, with a galvanised steel cable lifeline
With release pin and two-way winding handle, to engage rescue/recovery mode
Fixed handle anchor attachment point
Attachment/connection handle or can be fitted to a davit or tripod via a bracket
Aluminium double action hook on end of lifeline to EN362
Marking: According to standard, CE-markedStandard: EN 360 , EN 362
Select 2 OD lever hoist (with overload device)
143.67 €*
WLL:
250
|
Lifting height m:
1.5
The Rema® Select 2 OD ratchet hoist with serial built-in overload device, except 250 kg *, for safe working during lifting, pulling, tensioning or lashing.
Properties
The innovative overload device ensures safer operation of the hoist.
Overload device system makes it possible to lower the load in a controlled way.
Overload device prevents dangerous overloading of the hoist and construction.
Low leverage at full load due to bearing.
Equipped with a double pawl system.
Brake fitted with asbestos free friction discs.
Load chain wheel is made of precision and wear-resistant alloy steel.
Freewheel is possible in unloaded condition.
Top and bottom swivel hook with robust safety latches.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Galvanized load chain Grade 8.
Lever with REMA rubber anti-slip handle.
* = without overload protection.
Standard delivery
1,5 m lifting height (max distance between top and bottom hook).
250 kg without overload device.
Option
Available in other lifting heights.
Marking: According to standard, CE-markedStandard: EN 818-7 , EN 13157 Safety factor: 3
Variants from 113.19 €*
Aluminum tripod D / DW
1,660.15 €*
Length:
1180-1880
REMA aluminum tripods are very light and easy to transport in any trunk because they can be retracted, so ideal for work.
Properties
Light aluminum construction.
Easy to transport through the telescopic version.
Type D is equipped with suspension eye, height adjustment and pointed legs.
Type DW is equipped with galvanized winch with load pressure brake, complete with steel cable and rotatable load hook, height adjustment and pointed legs.
Option
Steel tripods on request.
3050025 flat footplates with anti-slip coating.
3050026 securing chain against leg slip.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
S20P Low headroom Hoist/Push trolley combination
508.03 €*
WLL:
0.5
|
Lifting height m:
3
These low headroom hoist-trolley combinations are only supplied with Rema® Select 200OD hand chain hoist.
Properties
Low headroom.
Push trolley.
Technical detail hand chain hoist, see Select 200OD.
Wheel fracture support devices for additional safety.
Adjustable to allow attachment to different beam sizes..
Standard delivery
Included trolley.
3 meters lifting height (max. between top and bottom hook).
2.5 m operating height.
Option
Available in other lifting and operating height on request.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 818-7
MK-250KS and MK-500KS compact crane magnets
1,251.70 €*
WLL:
0.25
REMA MK-250KS and MK-500KS are suitable for both vertical and horizontal lifting and transporting steel plates, allowing the steel plate can be rotated, which is an advantage in vertical storage. Both types are suitable for lifting steel sheets from 4 mm thick. With 20 mm thick steel plates the maximum lifting force is achieved. A lifting magnet is sufficient for steel sheets with a size of 1 x 2 m. For steel plates of 1.5 x 3 m two lifting magnets with a crossbar are required.
Properties
Tiltable lifting eye.
Can be used where high safety requirements apply and / or the surface of the steel plate is not 100% smooth or clean.
IMPORTANT!
The full lifting force is only achieved if the surface of the steel plate to be lifted (St 37k and 25 mm thick) is processed, smooth and clean.
Never exceed the safe workload.
Hand magnets have safety factor 2.
Crane magnets have safety factor 3.
It is forbidden to be under the load of a crane magnet.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100
Hoist traverse beam REMA , with 2 fixed hooks.
823.50 €*
WLL:
1
Properties
Surface finish: zinc phosphate primer RAL 2004 (orange).
Capacity range labelling.
Black-and-yellow safetymarkings at beam ends.
Hooks equipped with safety latches.
High quality steel hooks grade 10.
Option
Sandblasting and painting in every RAL color.
Higher load capacity and bigger dimensions on request.
Marking: According to standard, CE-markedStandard: EN 13155 , EN 12100 , EN 1677-1
Portal crane REMA PKAV Mobile, Aluminum
8,675.22 €*
Height:
1.5-2
|
WLL:
1
Properties
Mobile with load.
Very short assembly and disassembly time of a few minutes.
3-part dismountable, two columns and a support beam.
Foldable columns for easy transport.
Height adjustment, installation in low spaces is possible.
Adjustable span by one, movable columns.
Very low own weight because the crane is made entirely of aluminum and plastic.
Applications
If a non-permanent lifting point has to be created quickly and easily.
Ideal for use when changing tools on machines or as an aid for repairs and replacement of parts, machines and pumps.
Standard delivery
Trolley included.
Exclusive hoist (see Chapter 1).
Option
Other designs on request
Material: Aluminum.Marking: According to standard, CE-markedStandard: EN 15011 , EN 12100 , EN 13157
EOB eye-bolt (Grade 8)
28.96 €*
WLL:
0.4
High-alloyed steel eyebolt. Eye bolts may only be tightened by hand.
Safe workload, under a maximum angle of 60° as shown.
The lifting eye must not be loaded sideways.
Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 8
S2 endless polyester flat slings
10.49 €*
WLL:
1
|
EWL:
0.5
This professional webbing sling is extremely suitable for intensive industrial use.
Properties
Simplex design.
WLL stripes, each stripe is 1 ton (up to 10 tons).
1 t load capacity for each 30 mm webbing width.
Available up to 10 Ton.
Material: polyester Marking: According to standard, CE-markedStandard: EN 1492-1 Note: Packed in plastic including REMA manual.
RSBS swivel self locking hook (Grade 10)
60.43 €*
WLL:
1.4
Marking: According to standard, CE-markedStandard: EN 1677-3 Note: With bearing, rotatable under load.Safety factor: 4Grade: 10
Concrete pipe lifting clamp CBA, vertical.
582.52 €*
WLL:
1.5
Properties:
Specifically developed for safe lifting of concrete pipes in vertical position.
On special order supplied with chains and crane eyes.
Optional:
Lifting chain: 3-legs chain/8mm/RMA-8/C-link/1500mm
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13155 Note: WLL and weight is allways per set of 3 pcs.Warning: Always to be used per 3 pieces.
Elephant ALCMS Electric chain hoist combined with trolley 400V
0.00 €*
WLL:
0.25
|
Lifting height m:
7
The Elephant ALCMS 400 V electric chain hoists are compact and assembled with an electric trolley. Wide availability due to the high duty cycle in combination with a high hoisting speed.
Properties
Slip clutch against overload.
Self-locking brake that holds the load at any desired height.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Galvanized load chain, class DAT (Grade 8).
Technical specification chain hoist
Insulation class E.
FEM 9.511 motor: 2m.
Power supply 400VAC - 50Hz.
Protection class IP54.
Technical specification trolley
Travel speed trolley 10 m / min
Trolley flange width 75-125 mm.
Protection class IP54
Motor power 0.4 kW
Operating voltage 400V - 50Hz
Standard delivery
3 m lifting height (maximum distance between top and bottom hook).
1.8 m control cable.
24V pendant control station.
4 m power cable.
Plastic chain bucket up to 6 m chain, from 6 m chain bag.
Included electric trolley.
Option
Other hoisting and operating height is also possible.
Larger chain bag > 3 m.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 14492 , EN 818-7
C-15E DIN-580 Eye bolt type
1.95 €*
WLL:
0.14
The safe working load is only suitable for hoisting and pulling in line.
The lifting eye must not be loaded sideways.
Material: C-15EMarking: According to standard, CE-markedStandard: DIN 580 Note: Only use in a straight lifting position.
REMA 10 chain (Grade 10)
17.10 €*
Chain diameter:
6
|
WLL:
1.4
Marking: According to standard, CE-markedStandard: EN 1677-1 , EN 818-4 Safety factor: 4Grade: 10
YA mini lever hoist
316.73 €*
WLL:
250
|
Lifting height m:
1.5
The Rema® YA lever hoist is an extremely robust lever hoist for hoisting, pulling, tensioning and lashing in all directions. With one simple action the lever hoist can be set in its freewheel.
Properties
Very low self weight, compact dimensions.
The rotatable top and bottom hook are provided with safety latches.
In case of overload, the hooks will gradually bend and do not suddenly break off.
Self locked brake that holds the load at any desired height.
Freewheel is possible in unloaded condition.
Freewheel by one simple action.
The hoist is fitted with a rubber anti-slip handle.
Galvanized load chain (Grade 10).
Standard delivery
1,5 m lifting height (max distance between top and bottom hookpositions).
Option
Available in other lifting heights.
Marking: According to standard, CE-markedStandard: EN 818-7 , EN 13157
GHC hydraulic forklift jack
638.52 €*
WLL:
5
|
Lifting height m:
0.414-0.724
Properties
Load capacity on pawl 4000 kg
Load capacity on head 5000 kg
Double lifting heights
Overload prevention
2 lifting speeds normal or fast; with or without load.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 1494