Lifting eyes ensure a safe connection of load and sling. In this product category you will find information on rigid and swivel lifting points in screwable or weldable design in various load capacities. Special anchor points for PPE against falls from a height or in stainless steel design offer optimal solutions for your individual application.
The safe working load is only suitable for hoisting and pulling in line.
The lifting eye must not be loaded sideways.
Material: C-15EMarking: According to standard, CE-markedStandard: DIN 580 Note: Only use in a straight lifting position.
Features: Tighten hand-tight in load direction.Marking: According to standard, CE-markedStandard: EN 1677-1 Note: Rotatable through 360°.Warning: Not rotatable under load.Safety factor: 4Grade: 10
Welding hooks can be used on trucks, trailers, excavators, draglines, cross beams etc. The hook can be welded. REMA welding hooks are fitted with stable and strong safety latches. All hooks have a powder coated surface.
Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 8
The safe working load is only suitable for hoisting and pulling in line.
The lifting eye must not be loaded sideways.
Material: C-15Marking: According to standard, CE-markedStandard: DIN 582 Note: Only use in a straight lifting position.
High-alloyed steel eyebolt. Eye bolts may only be tightened by hand.
Safe workload, under a maximum angle of 60° as shown.
The lifting eye must not be loaded sideways.
Marking: According to standard, CE-markedStandard: EN 1677-1 , DIN 580 Safety factor: 4Grade: 8
Type description
Type C811 has a safety coefficient 5 in all loading directions.
Type C812 has a safety coefficient 4 in all loading directions.
Marking: According to standard, CE-markedStandard: EN 1677-1 Note: Rotatable through 360°, foldable 90°.Warning: Not rotatable under load.Safety factor: 4
Can be loaded in a tilting device.
For bolt mounting on machine parts or truck construction, Ideal for hooking and lashing equipment.
Marking: According to standard, CE-markedStandard: EN 1677-1 Note: 120° Foldable.Safety factor: 4
Marking: According to standard, CE-markedStandard: EN 1677-1 Note: Rotatable through 360°, foldable 90°.Warning: Not rotatable under load.Safety factor: 4
Marking: According to standard, CE-markedStandard: EN 1677-1 Note: Rotatable through 360°, foldable 180°. Rotates into the correct lifting direction.Safety factor: 4
Features: Tighten hand-tight in load direction.Marking: According to standard, CE-markedStandard: EN 1677-1 Note: Rotatable through 360°Warning: Not rotatable under load.Safety factor: 4Grade: 10
High-alloyed steel eyebolt. Eye bolts may only be tightened by hand.
Safe workload, under a maximum angle of 60° as shown.
The lifting eye must not be loaded sideways.
Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4Grade: 8
Red finish. For welding on machine parts or truck chassis. Ideal for anchoring and cargo fixation. Can be loaded in any direction. Adhere to welding requirements!
Marking: According to standard, CE-markedStandard: EN 1677-1 Safety factor: 4
The eyes can be loaded with working load limit in all directions. All the eyes are pivoted to avoid breakage in the eyes, which also make it possible to fold it aside when it is not in use. Furthermore it has a ball beared sviwel which makes the lifting eye to always stand in the correct direction to the load.
The advantages:
The stamped WLL applies to the kind of attachment by 90°.
Bolts of the quality class 10.9 crack-tested are permitted as connecting elements
Different threaded versions and lengths can be supplied on request.
Material: Eye and swivel of alloyMarking: WLL.Finish: Painted.Safety factor: 4:1
Eye nut to be screwed by hand.
Material: Alloy steel 8.8.Marking: Marked with WLL, sizes, steel quality, CE, producername, tracability.Finish: Red painted.Note: Approved for lifting.Safety factor: 4:1
Ball-bearing 360° under load rotatable lifting point. High resistant lifting eye 180° movable. The special screws are 100% crack-tested as well as protected against corrosion. The table with the load capacities depending on the method of lifting as lifting gear, number of legs and angle of inclination is a part of the user manual and packed together with each lifting point.
Permissible usage
Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull (see picture 1).
Non permissible usage
Make sure when choosing the assembly that improper load can not arise e.g. if:
The direction of pull is obstructed
Direction of pull is not in the foreseen area (see picture 2)
Loading ring rests against edges or load
To calculate the necessary thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
Material: Alloy steelMarking: According to standard, WLL, thread size and an individual serial number.Standard: EN 1677-1 except grade/WLLNote: Also available in special length (SL) and maximum lenght (MAXL) as well.Safety factor: 4:1
Screwable, 360° rotatable lifting point. The load ring is 180° movable and can be positioned at any required angle due to its replaceable and patented spring. Likewise interchangeable is the hexagon-special screw of grade 10.9 material, which is secured against loss.
The screw is 100% crack-tested as well as covered with a chromate VI-free protection against corrosion. It can be tightened with a hexagon wrench or spanner wrench.
Pewag winner profilift beta is available with metric or UNC-thread, whereas the lifting points with metric thread are also obtainable with customized thread lengths.
Permissible usage
Load capacity acc. to the inspection certificate respectively table of WLL in the mentioned directions of pull – see picture 1 and 2.
Non permissible usage
Make sure when choosing the assembly that improper load can not arise e.g. if:
The direction of pull is obstructed.
Direction of pull is not in the foreseen area (see picture 3).
Loading ring rests against edges or load (picture 4).
The load ring must be placed in the direction of pull before loading – do not turn under load.
To calculate the necessary thread length (L):
L= H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.
pewag provides, along with the standard and maximum thread lengths, specially customised thread lengths. Supplied customised and maxium thread lengths include a washer and a crack-tested, corrosion-proofed screw nut.
Material: Alloy steelMarking: According to standard, WLL, thread size and an individual serial number.Standard: EN 1677-1 except grade/WLLSafety factor: 5:1
The eyes can be loaded with working load limit in all directions. All the eyes are pivoted to avoid breakage in the eyes, which also make it possible to fold it aside when it is not used.
Model TAPG: Lifting D-Ring and Bridge - without Screws.
Model TAPG-S: Lifting D-ring, bridge and 2 screws 8.8 EN 24014 (DIN 931)
Attachment-point, bolt-on type, in working
load limits of 3 - 8 t.
Features:
Compact design
Secured four times against breakage
Working range 120°
Bolt on plate also serves as marking stencil
The D-link must be able to move freely. The load take-up may not be supported on edges or on the sling point.
Material: Eye of alloy steel.Marking: WLL.Note: The surface that the lifting eyes shall be attatched to shall be flat and tolerate the load it is going to be exposed to.Warning: Only screws with a minimum strength class of 8.8 EN 24014 (DIN 931) may be usedSafety factor: 4:1
The eye bolt PLGWI is the stainless variant of the lifting point PLGW from pewag. Equipped with the same advantages in terms of measurement, carrying capacity and application, the PLGWI expands the application tremendously. The lifting point PLGWI is available in the version "Supreme" with the patented tool-free mounting options, and on request in the version "Basic". The pewag PLGW Basic differs solely in the assembly: mounting and removing requires the use of a hexagon Allen wrench.
Further benefits of the lifting point PLGWI compared to a conventional DIN 580 eye bolt are:
• Same thread size but much higher working load limit
• Rotatable 360° – can be aligned in the direction of pull
• 4-fold safety against breakage in all directions
• 100% crack tested screw
• extended applications by using a duplex steel with higher resistance to corrosion. (PRE/N-value* of 34 at variant PLGWI Basic)
Each lifting point is marked with the allowed WLL, the thread size and an individual serial number that allows traceability. The table with the load capacities depending on the different methods of lifting, number of legs and angle of inclination is part of the user manual, which is added to each lifting point. This new lifting point has been developed and tested according to the valid technical standards (MSV 2010, MD 2006/42/EC, BGR 500, EN 1677, etc).
* The PRE (n) value is determined by the alloy composition, and thus the corrosion resistance.
Safety factor: 4:1
Available in UNC and Metric thread sizes.
UNC threads available in sizes fom 650 pounds to 29,000 pounds Working Load Limit, with a design factor of 5 to 1.
Metric threads available in sizes from 300kg to 13,000kg and dual rated in both a 4 to 1 and 5 to 1 design factor.
360° swivel and 180° pivot action.
100% individually proof tested to 21/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected. (Can be furnished 100% Magnetic Particle inspected when requested at time of order). Bolts are individually Proof Tested.
Fatigue rated to 20,000 cycles at 11/2 times the Working Load Limit.
Bolt is secured with patented retaining ring which requires no modification to threads. This method allows for easy disassembly and assembly of hoist ring for thorough examination of all components. Replacement kits are available.
Top washer has the following features: The Working Load Limit and Recommended Torque value are permanently stamped into each washer.
Design: CrosbyFeatures: Rated at 100% at 90° angleMaterial: Alloy Steel - Quenched and TemperedMarking: Product Identification Code (PIC) for material traceability along with a working Load Limit and the name Crosby or “CG” stamped into it.Finish: Washer is colour coded for easy identification Silver Metric threadSafety factor: 5:1
The eyes can be loaded in all directions. All the eyes are pivoted to avoid breakage in the eyes, which also make it possible to fold it aside when it is not in use. Furthermore it has a ball beared swivel which makes the lifting eye to always stand in the correct direction to the load.
Material: Eye and swivel of alloy steelMarking: CE-marked, WLL.Finish: Painted.Note: The surface that the lifting eyes shall be attatched to shall be flat and tolerate the load it is going to be exposed to.Safety factor: 4:1
The QLR is a double swivel ring that allows particularly fast anchoring. At the push of a button, it can be fixed in the threaded hole in a matter of seconds. Its double swivel ensures a perfect alignment with the sling.
The QL.DSR saves up to 80 % of time compared to screwing in a conventional lifting ring. The system works purely mechanically and thus requires no complex maintenance.
The swivel lifting ring QL.DSR is made of gradup steel, which stands for a better quality of the used raw materials. It has higher lifting capacities than fixed rings and has a safety factor of 5, which means that its breaking load is five times greater than the capacity indicated in the technical data sheet.
Compliant to directive machine 2006/42/CE
Material: AISI 316LMarking: According to standard, CE-marked, WLL , safety factor, individual traceability number (linked to Coditracer)Temperature range: -20°C up to +200°CStandard: EN 1677-1 except gradeSafety factor: 5:1