POWERTEX PPT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails.
The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams).
The trolley can easily be positioned along the beam by pushing or pulling thanks to high quality steel wheels with bearings.
Features:
Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL
Mechanical stops integrated in the design to prevent derailing
Equipped with connection plate with eye to hoist’s upper hook or direct connection
Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye
Rubber bumpers to absorb shock loads on impact to rail ending
Equipped with RFID for quick registration and maintenance
Marked with QR code to allow access to user manuals at any time
PPT-S2 is easy to mount and dismount on a horizontal rail or beam
The 3 piece design makes installation quick and ergonomically
The shaft is easily locked using the lock plate (No need to use large castle nut nor collar pins)
Wheel shafts are robotic welded for high quality weld seams
Large steel wheels equipped with double sided sealed bearings that do not need maintenance
Powder painted side panels gives a nice lasting finish
Fits most types of beam profiles and most brands of lifting blocks and electric hoists
Longer shafts for wider beams can be supplied from stock in EU
Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate.
Blackline BT products are suitable to be used in theatres and entertainment industry.
Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1
POWERTEX Chain bags are durable and designed to be easily mounted to chain blocks. They can contain up to 10 meter of chains.
Universal - Fits many brands and models of chain hoists in the market
Easy to mount without dismantling the hoist
Comes in two different sizes
The chain bags can be combined with POWERTEX Chain Block – both Blackline BK and standard S1 and S2 versions.
Blackline BK products are suitable to be used in theatres and entertainment industry.
Material: PVC-coated canvas, steel frame/holding pillars.Finish: Black.
POWERTEX Geared Trolley PGT-S2 is a high quality, durable low built push trolley that is easy to install on horizontal beams and rails.
The trolleys can be used for I-beams with plane flanges (such as IPE, HEA or HEB types) or beams with sloping flanges (such as INP-beams).
The trolley can easily be positioned along the beam using the hand chain thanks to high quality steel wheels with bearings.
Features:
Safe - All POWERTEX trolleys are proof load tested 1,5 x WLL
Mechanical stops integrated in the design to prevent derailing
Equipped with connection plate with eye to hoist’s upper hook or direct connection
Connection plate can be turned 90 degrees to allow direct connection to POWERTEX S2 hoists without need of intermediate hook/eye
Rubber bumpers to absorb shock loads on impact to rail ending
Equipped with RFID for quick registration and maintenance
Marked with QR code to allow access to User manuals at any time
PGT-S2 is easy to mount and dismount on a horizontal rail or beam
The 3 piece design makes installation quick and ergonomically
The shaft is easily locked using the Lock plate (No need to use large castle nut nor collar pins)
Wheel shafts are robotic welded for high quality weld seams
Large steel wheels equipped with double sided sealed bearings that do not need maintenance
Powder painted side panels gives a nice lasting finish
Fits most types of beam profiles and most brands of lifting blocks and electric hoists
Longer shafts for wider beams can be supplied from stock in EU
Can be turned into Blackline version BT by adding the included grey label over the shiny nameplate
Option:
Black painted hand chain instead of galvanized hand chain
Blackline BT products are suitable to be used in theatres and entertainment industry.
Marking: According to standard, CE-marked, WLL, beam width, individual serial numberTemperature range: -10°C up to +50°C.Finish: Black powder painted (Matt finish)Standard: EN 13157 Safety factor: 4:1
Adjustable spindle hand trolley with rod-type securing nuts.
Properties
Robust design.
Can be mounted quickly by means of a spindle.
Rod-type securing nuts for added safety.
With wheel fracture support device.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
For lifting, handling, tipping and emptying of steel barrels (210 liter of liquid).
Properties
Tipping arrangement with locking function both in vertical and horizontal positions.
Marking: According to standard, CE-markedStandard: EN 12100
A simple aid for handling steel barrels of 210 liter.
Properties
Frame welded from steel band.
Steer wheels with zinc-coated brackets.
The threads of wheels are of oil- and water-resistant.
Zinc-coated bolts and nuts.
Marking: According to standard, CE-markedStandard: EN 12100
REMA adjustable buffers are applied to a monorail I / H profile track with a flat flange as an addition to your trolley-hoist system.
KB1 = Yellow coated.
Marking: CE-marked
REMA adjustable buffers are applied to a monorail I / H profile track with a flat flange as an addition to your trolley-hoist system.
KB2 zinc coated
Marking: CE-marked
Hinged hand trolley with automatic locking.
Properties
Can be mounted on rails easily and very quickly.
With wheel fracture support device.
Maximum beam thicknes for type A1=28 mm and A2/A3 = 30 mm.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Properties
Adjustable flange by adding or removing rings.
Equipped with solid stainless steel wheels.
Wheel rupture supports and tilt protection provide extra safety.
Stainless steel AISI-304.
Material: AISI-304Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Properties
Adjustable flange by adding or removing rings.
Equipped with solid steel machined wheels.
Wheel rupture supports and tilt protection provide extra safety.
Galvanized hand chain 5 x 23.7.
Suitable for various beam flat or bevel profiles.
2-axis.
Standard delivery
Operating height 3 meters.
Option
Every other operating height.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Properties
Suitable for flat or bevel profiles.
Equipped with solid steel wheels with maintenance-free bearings.
Compact and lightweight.
Quick assembly through threaded adjustable.
Safe by locking lever.
With wheel rupture supports.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Simple and quick assembly by folding the self-closing trolley close to the flange of the beam.
Properties
Suitable for flat or bevel profiles.
Equipped with steel wheels with maintenance-free bearings.
Compact and lightweight.
With wheel rupture supports.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
For handling steel barrels containing liquid in standing position (210 liter).
Properties
Easy operation due to the hydraulic pump provided.
Excellent rolling properties due to the combination of two large side wheels and a steer wheel.
Marking: According to standard, CE-markedStandard: EN 12100
Properties
Adjustable flange by adding or removing rings.
Suitable for various profiles, with flat or bevel flange.
Equipped with solid steel machined wheels.
Bearing by maintenance-free ball bearings.
Wheel rupture supports and tilt protection provide extra safety.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Suitable for various profiles, with both a straight and an inclined flange.
Properties
Suitable for flat or bevel flange
Adjustable flange width by adding or removing rings.
Solid steel wheels, bearing of maintenance-free ball bearings.
Short construction height in combination with REMA Select 200 OD hoist 0.5 / 1.0 / 2.0T, by link that replaces the upper hook.
Wheel rupture supports and anti-surge protection ensure optimum safety.
211 type, standard version.
211BF type, wide flange version.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
EEFS 1-axle trolleys can ideally be combined with any electric chain hoist.
Properties
2 speed.
Wheel rupture supports and anti-surge devices.
Push-button box not included.
Technical properties
Driving speed 5/20 m/min
Operating voltage: 400V
Control voltage: 24V
Protection class: IP54
Duty cycle 120 sw/h ED 40%
isolation class: F
Motor power 0.04/0.18 kW
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 , EN 1492-2 Note: Always specify flange width in mm.
REMA HFN trolleys can only be assembled together with the REMA SR electric chain hoists.
Properties
Double axle design.
Wheel rupture supports and anti-surge devices.
Equipped with steel machined wheels.
Assembly and suspension plates not included.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 Note: Allways mention the right flange width in mm.
Adjustable beam clamps for establishing a semi-permanent suspension point for steel profiles.
Properties
Easy and quick mounting.
Suitable for various steel profiles.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Suitable for various profiles, both for flat or bevel flange.
Properties
Suitable for flat or bevel flange
Adjustable flange width by adding or removing rings.
Solid steel wheels, bearing of maintenance-free ball bearings.
Short construction height in combination with REMA Select 200 OD hoist 0.5 / 1.0 / 2.0T, by link that replaces the upper hook.
Wheel rupture supports and anti-surge protection ensure optimum safety.
211 type, standard version.
211BF type, wide flange version.
Galvanised hand chain 5 x 23,7 mm.
Standard delivery
3 meter operating height.
Option
Longer or shorter operating chain.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
The Rema Select 30 S spindle push trolley is suitable for various steel profiles. They are simple, quick and safe to install, ideal for assembly work.
Properties
Suitable for flat or bevel profiles.
Equipped with solid steel wheels with maintenance-free bearings.
Compact and light weight.
Quick assembly through threaded adjustable.
Safe by extra locking lever.
With wheel rupture supports.
Robust steel version with a low own weight.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Adjustable spindle hand trolley with rod-type securing nuts.
Properties
Compact design and low tare weight.
Can be mounted quickly by means of a spindle.
Rod-type securing nuts for added safety.
With wheel fracture support device.
Maximum beam thicknes for type A1=28 mm and A2/A3 = 3 mm.
Marking: According to standard, CE-markedStandard: EN 13157 , EN 12100
This trolley is only available in combination with an FAH / FBH electric hoist 400V.
Properties
Single axle design.
1 driving speed.
Wheel rupture supports and anti-surge devices.
Including 24V push-button box with emergency stop.
Simple plug connection.
Technical properties
Driving speed 10 m/min
Operating voltage: 400V
Control voltage: 24V
Protection class: IP54
Duty cycle 120 sw/h ED 30%
isolation class: E
Motor power 0.4 kW
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 Warning: Always specify flange width in mm.
Properties
Double axle design.
1 or 2 travel speeds.
Wheel rupture supports and anti-surge devices.
Supporting rollers not included.
Assembly and suspension plates not included.
Technical properties
Operating voltage: 400V
Protection class: IP55
isolation class: F
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157 , EN 1492-2 Note: Allways mention the right flange width in mm.