👉 Get our user manual for Powertex Shackles here
Shackles belong to steel rope accessories. Shackles are used to connect two wire ropes or a wire rope and another element. Shackles are available in different sizes and materials. Shackles are ideal for applications where a quick and secure connection point is required, such as lifting equipment or slinging loads.
Dee Shackle POWERTEX PDSB
1.84 €*
WLL:
0.5
Dee type shackle PDSB is a high quality shackle intended for use in demanding environments.
It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 3, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts are marked with batch number for traceability
The body is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including bolts and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Retaining pins made from stainless steel
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy safety bolt and nuts. Stainless steel retaining pinsMarking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1.Grade: 6
Variants from 1.90 €*
Bow Shackle POWERTEX PBSP
1.43 €*
WLL:
0.33
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments.
It is supplied with a screw pin for quick and easy opening.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and screw pins marked with batch number for traceability
Larger sizes equipped with arrows to indicate 45 degrees to vertical
Raised pad for dedicated and easy individual ID (3,25 t and up)
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including screw pins and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Screw pins are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Bolt additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6
Variants from 1.48 €*
Bow Shackle POWERTEX PBSB
1.84 €*
WLL:
0.5
Bow type shackle PBSB is a high quality shackle intended for use in demanding environments.
It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 3, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
Larger sizes equipped with arrows to indicate 45 degrees to vertical
Raised pad for dedicated and easy individual ID (3,25 t and up)
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including bolts and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Retaining pins made from stainless steel
Multilanguage user manuals
Material: Forged alloy steel, supplied with safety bolt and nuts. Stainless steel retaining pins.Marking: According to standard, CE-marked, POWERTEX (PX or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6
Variants from 1.90 €*
Bow Shackle POWERTEX PBSP Blackline
1.59 €*
WLL:
0.5
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments.
It is supplied with screw pin for quick and easy opening/closing.
Blackline is suitable for use in the entertainment industry and in theatres where the dark surface gives little visual reflection.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
Blackline products are painted to give little visual reflection
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, POWERTEX (PT or PTEX) , WLL, CE, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: Up to 3/8”, matt black powder painted 1/2” and up, matt black electro galvanizedStandard: EN 13889 Safety factor: 6:1.
Variants from 1.64 €*
Dee Shackle POWERTEX PDSP
1.59 €*
WLL:
0.5
Dee type shackle PDSP is a high quality shackle intended to be used in demanding environments.
It is supplied with screw pin for quick and easy opening/closing.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
The body is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including screw pins are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Screw pins are additionally painted in blue for quick and easy detection as original POWERTEX parts
Multilanguage user manuals
Material: Forged alloy steel, supplied with screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Screw pin additional powder painted.Standard: EN 13889 Safety factor: 6:1Grade: 6
Variants from 1.64 €*
RSH D-shackle AISI 316 (G6) AISI (Grade 6)
18.24 €*
WLL:
0.5
Material: AISI 316Marking: According to standard, CE-markedStandard: EN 818-4 Safety factor: 4Grade: 6
Screw Pin Anchor Shackle Crosby G-209
6.46 €*
WLL:
0.5
Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
Proof load: 2 x WLL.
Material: Carbon steel with headbolt in alloy steel.Marking: According to standard, CE-markedTemperature range: -40°C up to +204°CFinish: Hot dip galvanized.Standard: EN 13889 Safety factor: 6:1Grade: 6
Alloy Screw Pin Shackle, Crosby, Wide Body S-2169
0.00 €*
WLL:
18
Capacities of 7, 12.5 and 18 metric tons.
Proof Load is 2 times the Working Load Limit.
Individually proof tested and magnetic particle inspected. Crosby certification available at time of orde.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Material: Quenched and Tempered for maximum strength. Forged Alloy Steel.Marking: CE-markedFinish: Self coloredSafety factor: 5:1
Alloy Screw Pin Shackles, Crosby, Wide Body G-2169
0.00 €*
WLL:
18
Capacities of 7, 12.5 and 18 metric tons.
Proof Load is 2 times the Working Load Limit.
Individually proof tested and magnetic particle inspected.
Meets or exceeds all requirements of ASME B30.26 including identification, ductilit design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
Material: Quenched and Tempered for maximum strength. Forged Alloy Steel.Marking: CE-markedFinish: Galvanized Safety factor: 5:1
Stainless Round Steel Shackle D-type
3.52 €*
WLL is theoretical ratings. Not tested.
Material: AISI 316.Warning: Not for lifting!
Shackle Crosby G-2170 Grommet
0.00 €*
WLL:
125
Features:
For use with single or double large diameter grommets.
Extra large sling contact area improves efficiency of the grommet sling.
Increases usable sling strength minimum 60 % and greatly improves life of grommet slings.
Shackles utilize new Easy-Loc bolt system.
Large machined flat on ears that can be drilled and tapped for adapting other accessories.
All 2170 shackles are individually proof tested and magnetic particle inspected.
Material: Quenched and Tempered, Cast alloy steelMarking: According to standard, CE-marked, WLL, RFID EquippedFinish: Bows are furnished Dimetcoted and pins are Dimetcoted, then painted red.Standard: EN 13889 Safety factor: 5:1
Stainless Round Steel Shackles H-type
3.05 €*
WLL are theoretic ratings. Not tested.
Material: AISI 316.Warning: Not for lifting!
Heavy Duty Shackle Green Pin® P-6036
2,314.77 €*
WLL:
120
Bow shackles with safety bolt.
Certification: This product can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity. All shackles starting from 150 tons are supplied with a Lloyd's Register of Shipping Certificate on proof load.
Material: Bow and pin alloy steel, quenched and tempered.Marking: CE-markedFinish: Shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized).Note: This shackle can also be delivered with fixed nut (an extra AISI 316 securing bolt is drilled through both the nut and shackle pin. This securing bolt is fastened with two sets of Nord-Lock®Safety factor: 5:1Grade: 8
Bolt Type Anchor Shackle Crosby G-2130
6.18 €*
WLL:
0.5
Bolt Type Anchor shackles with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specification RR-C 271G Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
Proof load: 2 x WLL.
Material: Forged – Quenched and Tempered, with alloy boltsMarking: According to standard, CE-marked, WLL, RFID chip for 25T and higher.Temperature range: -40°C up to +204°CFinish: Galvanized with painted bolt.Standard: EN 13889 Safety factor: 6:1Grade: 6
Bow Shackles with Safety Bolt G-4163
7.86 €*
WLL:
0.5
Certification: This product can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity. All shackles starting from 2 t can be supplied with DNV 2.7-1 certificate.
Standard: EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A.
Note: This shackle can also be delivered with fixed nut (an extra AISI 316 securing bolt is drilled through both the nut and shackle pin. This securing bolt is fastened with two sets of Nord-Lock® washers and a securing nut. These washers lock when subjected to movement and keep the nut safely in position).
Material: Bow and pin high tensile steel, quenched and temperedMarking: According to standard, CE-markedTemperature range: -40°C up to +200°CFinish: Hot dip galvanizedStandard: EN 13889 Safety factor: 6:1Grade: 6
Super Shackle no 858, Gunnebo with safety Bolt
0.00 €*
WLL:
7
Bow shackle with safety bolt.
Material: High tensile steel, quenched and temperedMarking: According to standard, CE-marked, WLLTemperature range: -20°C up to 200°CFinish: All parts hot dip galvanized + brown colour markingStandard: US. FED. SPEC. RR-C-271 Safety factor: 5:1Grade: 8
Shackle Crosby G-2160, Wide Body
199.06 €*
WLL:
7
Design: Wide body shackle. Shackle with improved bow radius that greatly improves life of wire rope slings. Can be used to connect wire rope slings, high strength synthetic web slings or high strengths ynthetic round slings.
Approved for use at -40 degree C to 204 degree C. Shackles 18t and larger have DNV Type Approval to Rules for Certification of Lifting Appliances, and are produced in accordance with DNV MSA requirements.
Proof load: All 2160 shackles are individually proof tested and magnetic particle inspected. Sizes 300 metric tons and smaller are proof tested to 2 times the Working Load Limit, sizes 400 metric tons and larger are tested to 1.33 times Working Load Limit.
Material: Forged alloy steel from 7 through 300 metric tons. Cast alloy steel from 400 through 1550 metric tons.Marking: According to standard, CE-marked, WLL. Shackles, 30t and larger, are RFID EQUIPPED.Finish: 7-55 tons are galvanized with painted pin. 75t and larger, bows are furnished Dimetcoted, and pins are Dimetcoted, then painted.Standard: EN 13889 Safety factor: 7-300 t 5:1 ; 400 t < 4,5:1.
Super Bow Shackles with Safety Bolt and Fixed Nut G-5243
124.36 €*
WLL:
3.3
Fixed nut super shackles, bow shackles with safety bolt and fixed nut.
Certificaton: The bow shackles with safety bolt can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity. All shackles starting from 150 tons are supplied with a Lloyd’s Register of Shipping Certificate on proof load.
Note: Green Pin® Standard, Polar and Super shackles can be equipped with an extra AISI 316 securing bolt which is drilled through the nut and shackle pin.
This securing bolt is fastened with two sets of Nord-Lock® washers and a securing nut. This will keep the shackle nut in position. The Nord-Lock wedge-locking washers lock when subjected to extreme vibration or dynamic loads.
Standard: ASME B30.26 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B.
Material: Bow and pin alloy steel, quenched and temperedMarking: CE-markedTemperature range: -20°C up to +200°CFinish: Hot dip galvanized (175 ton shackle is painted)Safety factor: 5:1Grade: 8
Dee Shackles with Safety Bolt G-4153
1,191.46 €*
WLL:
85
Dee shackle with safety bolt.
Certification: This product can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity. All shackles starting from 2 t can be supplied with DNV 2.7-1 certificate.
Note: This shackle can also be delivered with fixed nut (an extra AISI 316 securing bolt is drilled through both the nut and shackle pin. This securing bolt is fastened with two sets of Nord-Lock® washers and a securing nut. These washers lock when subjected to movement and keep the nut safely in position).
Material: Bow and pin high tensile steel, quenched and temperedMarking: According to standard, CE-markedTemperature range: -40°C up to +200°CFinish: Hot dip galvanizedStandard: EN 13889 Safety factor: 6:1Grade: 6
Variants from 12.11 €*
Dee Shackles with Screw Collar Pin G-4151
5.38 €*
WLL:
0.33
Dee shackle with screw collar pin.
Certification: This product can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity. All shackles starting from 2 t can be supplied with DNV 2.7-1 certificate.
Standard: EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A.
Material: Bow and pin high tensile steel, quenched and temperedMarking: According to standard, CE-markedTemperature range: -40°C up to +200°CFinish: Hot dip galvanizedStandard: EN 13889 Safety factor: 6:1Grade: 6
Bow Shackles with Screw Collar Pin G-4161
5.40 €*
WLL:
0.33
Bow shackles with screw pin
Certification: This product can be supplied with a works certificate, 3.1 material certificate, manufacturer test certificate, EC Declaration of Conformity. All shackles starting from 2 t can be supplied with DNV 2.7-1 certificate.
Standard: EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A.
Material: Bow and pin high tensile steel, quenched and temperedMarking: According to standard, CE-markedTemperature range: -40°C up to +200°CFinish: Hot dip galvanizedStandard: EN 13889 Safety factor: 6:1Grade: 6