Talurit

End Stops for crane rope applications.

Featueres:These end stops are designed for full load applications of rotation resistant and low rotation ropes. The chamfered surface around the cylinder matches different fitting devices. The bore of the end stop is slightly conical to distribute the stress over a larger area.
The exact diameter and length of the end stop assembly should be confirmed when an order is placed to ensure a good match between stop and device.
The end stop is specifically manufactured for rotation resistant and low rotational ropes with a fill factor between 0.61 and 0.76 for other rope types please contact Certex.

  • Material: Mild carbon steel.
  • Marking: ID code and Manufacturer's symbol.
  • Temperature range: -40°C to 150°C
  • Finish: Ungalvanised.
  • Safety factor: 5:1
Crane stop with pad eye
Select a row from the table below, then click the add to quote button
Part Code Diameter
mm
Finish dia.
mm
Finish length
mm
CAD
10.09ESP23D52 23 52 178
10.09ESP24D52 24 52 178
10.09ESP25D52 25 52 178
10.09ESP26D52 26 52 178
10.09ESP27D58 27 58 203
10.09ESP28D58 28 58 203
10.09ESP29D58 29 58 203
10.09ESP30D64 30 64 219
10.09ESP31D64 31 64 219
10.09ESP32D64 32 64 219

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download