Wire Ropes & Accessories in modern lifting technology, wire ropes and related accessories are indispensable components that ensure safe and efficient load movement. Each installation and lifting need requires a specific wire rope / steel cable. Wire ropes / steel cables are sling ropes that you equip with appropriate hooks and use to lift and move loads. Here at CERTEX you will find wire ropes / steel cables in all possible sizes and compositions. From standard and special wire ropes, to long-lift or cross ropes, to high-performance ropes.
The right wire rope - Non-binding advice
At CERTEX, we offer a wide selection of wire ropes / steel cables, rope end terminations and matching accessories, as well as a variety of fabrication options. In addition to our own produced wire ropes / steel ropes of the brand ROPETEX, we also keep a large number of other ropes in stock for you - also in longer lengths.
Wire rope clips for rigging of static loads.Material: Stainless steel AISI 316Marking: According to standard, Recommended rope size in mmFinish: Polished surfaceStandard: DIN 741 Note: Follow the fitting instruction of wire rope clip drawing Warning: Not for lifting!
POWERTEX PSBS-S2 snatch block is a heavy-duty snatch block that can be used for temporary or permanent lifting and pulling installations. The block can be used to redirect a wire rope or to increase the load that the wire rope winch arrangement would be able to handle in a straight loading without block.
The wire rope is easily inserted by removing the hair needle pin, unwinding the quick bolt and turning the side plate.
Features:
Safe - Each snatch block is proof load tested 2 x WLL and examined in the factory prior delivery
Safe - The quick bolt is designed to be positively held in place also when the block is open
Safe - The swivel assembly is designed to be securely locked also when the block is open
Durable - forged/machined precision sheaves
Conical roller bearings (8t and up) or bronze bearings (2t and 4t)
2 grease nipples for quick maintenance of moveable parts
Hot dip galvanized shackle with safety bolt and nut
Sturdy side plates that protect the moveable parts
Identification plate made of metal instead of sticker
RFID equipped (chip) for easy service, inspection and asset control
Marked with QR code to allow access to user manuals at any time
2.2 Test certificate and Declaration of conformity delivered with each block
14 language user manuals delivered with each block
QR code for on-site access to multilanguage user manuals
Fulfills Machinery Directive 2006/42/EC
Material: Robust steel constructionMarking: CE-marked, POWERTEX, Model, WLL, Manufacturing date and Serial numberTemperature range: -20°C up to +50°CFinish: Red paintedSafety factor: 4:1
Dee type shackle PDSB is a high quality shackle intended for use in demanding environments.
It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
The shackle comply to EN 13889, AS 2741 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 3, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts are marked with batch number for traceability
The body is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including bolts and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Retaining pins made from stainless steel
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy safety bolt and nuts. Stainless steel retaining pinsMarking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 , AS 2741 Safety factor: 6:1.Grade: 6
Bow type shackle PBSB is a high quality shackle intended for use in demanding environments.
It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 3, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
Larger sizes equipped with arrows to indicate 45 degrees to vertical
Raised pad for dedicated and easy individual ID (3,25 t and up)
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including bolts and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Retaining pins made from stainless steel
Multilanguage user manuals
Material: Forged alloy steel, supplied with safety bolt and nuts. Stainless steel retaining pins.Marking: According to standard, CE-marked, POWERTEX (PX or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized + head-bolt and nut additional powder painted.Standard: EN 13889 , AS 2741 Safety factor: 6:1Grade: 6
POWERTEX Wire rope grip PWRG is approved for lifting when assembly is made according to the user instructions.
It is designed to be used with 6 or 8 stranded steel wire rope with steel or fiber core with tensile strength up to 1960 N/mm2.
Correctly mounted the assembly will withstand 80% of the steel wire ropes minimum breaking strength.
Safe - The grips are designed to assure high friction between wire rope and grip
Quick and easy to use
Quick mounting thanks to the recessed bolt head seats that hold the bolt while tightening the nuts
Low maintenance thanks to galvanization of grips and Dacrotized bolt and nuts
Tested according to 13411-5
Features: PWRG-4 and 6 are drop forged. PWRG-8, 10, 12, 16, 20, 25, 35 are casted.Finish: Galvanized.Warning: Not for use with compacted or hammered wire ropes. It is not recommended to use plastic covered ropes for lifting purposes with wire rope grips
Wire rope clips for rigging of static loads.
Chrome 6 free.
Material: Mild steel Marking: According to standard, Recommended rope size in mmFinish: ElectrogalvanizedStandard: DIN 741 Note: Follow the fitting instruction of wire rope clip drawing Warning: Not for lifting!
Dee type shackle PDSP is a high quality shackle intended to be used in demanding environments.
It is supplied with screw pin for quick and easy opening/closing.
The shackle comply to EN 13889 , AS 2741 and meets the performance requirements of US Federal Specification RR-C-271 Type IVB Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
The body is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including screw pins are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Screw pins are additionally painted in blue for quick and easy detection as original POWERTEX parts
Multilanguage user manuals
Material: Forged alloy steel, supplied with screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Screw pin additional powder painted.Standard: EN 13889 , AS 2741 Safety factor: 6:1Grade: 6
The general duty Thimble PT6899P from POWERTEX, intended for general duty steel wire rope slings and synthetic rope end termination. Wire rope size 2,5 – 9 mm.
Standard: Generally according to DIN6899B
Material: Steel plateFinish: Electrogalvanized
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments.
It is supplied with screw pin for quick and easy opening/closing.
Blackline is suitable for use in the entertainment industry and in theatres where the dark surface gives little visual reflection.
The shackle comply to EN 13889, AS 2741 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and bolts marked with batch number for traceability
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
Blackline products are painted to give little visual reflection
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, POWERTEX (PT or PTEX) , WLL, CE, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: Up to 3/8”, matt black powder painted 1/2” and up, matt black electro galvanizedStandard: EN 13889 , AS 2741 Safety factor: 6:1.
POWERTEX Rigging screw PRSJ is durable, easy to adjust and can be used in a variety of applications where the length of the load bearing part needs to be adjusted.
It is designed to provide quick rigging using standard tools and the same time closed body design effectively protects the thread.
Compact, lightweight construction
Safe – Each rigging screw (except M6 & M8) is proof load tested 1,5 x WLL and CE-marked making them suitable for lifting operations.
Easy to adjust the length using standard tools
The adjusted length is securely locked by closing the two counter nuts
Durable all steel construction
All parts are hot dip galvanized for long service life (except M6 and M8 which are electro galvanized)
The closed body design protects the threads from damage and at the same time prevent dirt from entering into the center body
The jaws are equipped with safety bolts and nuts and stainless steel retaining pins
Safety bolts and nuts are additionally painted in blue and red for quick identification as POWERTEX original parts
Multilanguage user manuals included
Standard: Machinery directive 2006/42/EC
Marking: CE-marked, POWERTEX, batch number, WLL (except M6 and M8),Finish: Hot dip galvanized, except from M6 and M8, which are electro galvanized.Note: Avoid eccentric loading of the rigging screw. Apply the load straight/in-line.Warning: *M6 and *M8 not for lifting! Do not adjust the length under load when lifting.Safety factor: 5:1
General duty Thimble PT6899F from POWERTEX, intended for general duty steel wire rope slings and synthetic rope end terminations.
Wire rope size 7 – 28 mm.
Standard: Generally according to DIN6899B
Material: Forged steelMarking: PX (Powertex), Recommended rope diameter, F (model) Finish: Hot dip galvanized
Bow type shackle PBSP is a high quality shackle intended for use in demanding environments.
It is supplied with a screw pin for quick and easy opening.
The shackle comply to EN 13889, AS 2741 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 2, Grade A.
Features:
Safe – All POWERTEX shackles are manufactured and tested in accordance to EN 13889
All bodies and screw pins marked with batch number for traceability
Larger sizes equipped with arrows to indicate 45 degrees to vertical
Raised pad for dedicated and easy individual ID (3,25 t and up)
The bow is forged in closed dies
All parts are made from alloy steel being quenched and tempered
All parts including screw pins and nuts are hot dip galvanized for long life
High quality hot dip galvanization process giving an exclusive mat grey finish
Screw pins are additionally painted in blue and red for quick and easy detection as original POWERTEX parts
Multilanguage user manuals
Material: Forged alloy steel, supplied with alloy screw pin.Marking: According to standard, CE-marked, POWERTEX (PT or PTEX) , WLL, size, grade and batch number.Temperature range: -20°C up to +200°CFinish: All parts hot dip galvanized. Bolt additional powder painted.Standard: EN 13889 , AS 2741 Safety factor: 6:1Grade: 6
Properties
Equipped with swivel hook.
Steel housing.
Side opening link permits quick, easy insertion of rope or cable without threading.
Sheave is made of high-quality steel with a groove.
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Steel wire rope ROPETEX S33 in stainless steel is a good choice for basic lifting applications in environments where corrosion resistance is important.
ROPETEX S33 is equipped with a Wire Strand Core (WSC) which gives the rope a good strength and a reasonable balance between fatigue and wear resistance.
ROPETEX S33 can be used for applications where the rope runs over sheaves or is spooled on a drum.
Typical applications:
lifting applications
slings
winch rope
stay ropes
Rope construction: 6x19M-WSCMaterial: AISI316 / EN 1.4401Marking: According to standardTemperature range: -40°C up to +200°CStandard: EN 12385-4 except materialFill factor: 0,53
Properties
Suitable for hand and mechanical applications.
Maintenance-free design.
Steel.
Self-lubricating bearings
Marking: According to standard, CE-markedStandard: EN 12100 , EN 13157
Rema®'s Grade 6 Stainless Steel Chain Slings and components are meticulously crafted using top-tier stainless steel (AISI 316), our slings are not just durable but also versatile. With the availability of individual components, we ensure a sustainable and customizable solution tailored to your specific lifting requirements. Our stainless steel assemblies are trusted across a myriad of industries such as construction, food & beverage, healthcare, aerospace, marine, and beyond.
Utilization Features:
Durability: Made with premium AISI 316 stainless steel, ensuring longevity and resistance to corrosion.
Versatility: Suitable for a range of lifting operations with various assembly options.
Safety: Comes with a CE-mark and a safety factor of 4, ensuring utmost safety during operations.
Adaptability: Individual component availability for a tailored lifting solution.
Markets/Applications:
Construction: Ideal for heavy-duty lifting and construction site operations.
Food & Beverage: Stainless steel ensures hygiene and cleanliness, making it perfect for food-related lifting tasks.
Medical: Suitable for lifting medical equipment and supplies.
Aerospace: Can be used for lifting aerospace components.
Marine: Resistant to corrosion, making it perfect for marine applications.
Material: AISI 316Marking: According to standard, CE-markedStandard: EN 818-4 Safety factor: 4Grade: 6
ROPETEX S49 in stainless steel is a wire rope often used as stay rope, stående rigning, hanging signs, and fencing rope.
Due to it's high quality stainless steel material grade it has an excellent corrosion resistance. It's most used in small diameters up to 12 mm.
ROPETEX S49 is equipped with a steel core (WSC).
Rope construction: 6x7-WSC (7x7)Material: AISI 316 / EN 1.4401Marking: According to standardTemperature range: -40°C up to +200°CStandard: EN 12385-4 except materialWarning: Not to be used for lifting purposesFill factor: 0,55
ROPETEX S49 is a wire rope for general purposes like hanging signs, control and signaling devices, but not for lifting. It's most used in small diameters up to 6 mm. ROPETEX S49 is equipped with a Steel Core (WSC).
ROPETEX S42 is the same rope but has a Fibre Core (FC) and is therefore more flexible.
Rope construction: 6x7-WSC (7x7)Marking: According to standardTemperature range: -40°C up to +200°C, for operating temperatures between 100°C and 200°C reduce MBF by minus 10 %.Standard: EN 12385-4 Warning: Not to be used for lifting purposesFill factor: 0,55
ROPETEX S42 is a wire rope for general purposes like hanging signs, small stays and in agriculture, but not for lifting. It's most used in small diameters up to 6 mm. ROPETEX S42 is equipped with a Fibre Core (FC).
ROPETEX S49 is the same rope but has a Wire Strand Core (WSC).
Rope construction: 6x7-FCMarking: According to standardTemperature range: -40°C up to +100°CStandard: EN 12385-4 Warning: Not to be used for lifting purposesFill factor: 0,47
Ropetex Traction Lube 40 is a synthetic lubricant which coats wire surfaces with a slip-resistant film. It is designed for situations in which frictional grip is vital, because it provides internal lubrication whilst avoiding excessive build-up with repeated applications.
Typical applications: Lifts, elevators and traction hoists.
Application methods: Portable sprayer or brushing/dripping.
Minimum application temperature: -5°C (product should be kept to at least 10°C for 48 hours before application).
Color/texture: White water fluid.
NLGI Grade: Solvent liquid
4-ball weld load: > 110 kgf
Available in a 20 liter drum.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -55°C up to +40°C
ROPETEX PERFORM 35C is a flexible high-quality rotation resistant steel wire rope. The strands are compacted giving it a high breaking load and making it wear resistant. ROPETEX PERFORM 35C is very well suited for multi-layer spooling.
Key product benefits
Rotation resistant steel wire rope
Excellent lifetime
Suitable for multi-layer drum spooling
Very resistant against crushing
Very wear resistant
High breaking load (MBL)
Main applications
Hoist ropes
Auxilary Hoist ropes
Standard: EN12385
Rope Category Number acc. to ISO4309:2017: 23-2
Rope construction: 35xK7WS Marking: According to standardTemperature range: -40°C up to +60°C with standard lubricant, wider range on requestStandard: EN 12385-4 Fill factor: 0,72RCN: 23-2Tolerance Ø: +2to: +4
Steel wire rope ROPETEX S14 is a galvanized rope equipped with a Fibre Core (FC) and has a transparent PVC coating. It can be used for various applications such as lifting slings, locking rope, etc. lt's most used in small diameters up to 12 mm. ROPETEX S14 is equipped with a Fiber Core (FC), which makes the rope very flexible with reasonable strength.
The PVC coating is UV stabilized which makes it suitable for longterm outdoor use and it is fully compliant with REACH Directive 1907/2006.
Rope construction: 6x19M-FCMarking: According to standardTemperature range: -30°C up to +70°CStandard: EN 12385-4 except from coatingNote: End terminations must be placed on exposed steel wire rope. PVC-coating must be removed before applying a ferrule, and ferrule size is to be determined by the steel wire ropes dimensions. Periodic inspections of the steel wire rope can be made difficult due to the PVC-coating. The end user must handle this risk in a proper way, by for instance replacing the wire rope in time.Fill factor: 0,45
ROPETEX S42 is a galvanized rope equipped with a Fibre Core (FC) and has a PVC coating. It can be used for various applications such as locking rope, signaling devices, etc but not for lifting. lt's most used in small diameters up to 8 mm.
Available with transparent, matt black or a matt Red (RAL 3020) PVC coating.
The PVC coating is UV stabilized which makes it suitable for longterm outdoor use and it is fully compliant with REACH Directive 1907/2006.
Rope construction: 6x7 FCMarking: According to standardTemperature range: -30°C up to +70°CStandard: EN 12385-4 except from coatingWarning: Not to be used for lifting purposesFill factor: 0,47