Working principle: The deviation of the cable caused by the intervention of the sensor causes a tangential force that is proportional to the force exerted on the traction cable. In the event of an overload, a microswitch integrated in the sensor is pressed and stops. the electric wire rope hoist.
Technical specifications
Basic version: for cables from 4 to 35 mm.
Measuring sensor: integrated microswitch.
Installation: directly on the fixed part.
Sensor material: aluminum of aviation quality.
Surface treatment: colorless anodising.
Calibration system: by micrometric screw.
Switching voltage: max 220 VAC.
Switching current: max 5 Amp.
Accuracy: 5% of EM.
Operating temperature: from -30 ° to + 80 ° C.
Protection class: IP40.
Maintenance: none.
Connection: 3-wire electricity cable.
Electrical output: contact plug.
Length of cord: 2 meters, option 5 meters.
Application
This overload protection is specifically designed for overhead cranes with multiple parts.
Option
IP65.
Marking: CE-marked
Ropetex Traction Lube 40 is a synthetic lubricant which coats wire surfaces with a slip-resistant film. It is designed for situations in which frictional grip is vital, because it provides internal lubrication whilst avoiding excessive build-up with repeated applications.
Typical applications: Lifts, elevators and traction hoists.
Application methods: Portable sprayer or brushing/dripping.
Minimum application temperature: -5°C (product should be kept to at least 10°C for 48 hours before application).
Color/texture: White water fluid.
NLGI Grade: Solvent liquid
4-ball weld load: > 110 kgf
Available in a 20 liter drum.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -55°C up to +40°C
Ropetex Thin Lube 30 is a semi-dry thin film lubricant that can be utilized in a wide range of applications, both in industry and construction. It has excellent penetration and
corrosion resisting properties. Thin Lube 30 also minimizes wear between the wires and
strands of a steel wire rope, and is therefore perfect for frequent use in harsh working
conditions. It also consists of components that reduce abrasive particle contamination,
the probability of lubricant ‘flinging off’ and a lubricant build-up
Typical applications: General industrial lifting, winch ropes, tower cranes, mobile cranes, dockside cranes and fishing ropes
Application methods: Portable sprayer or brushing/dripping.
Minimum application temperature: -5°C (product should be kept to at least 10°C for 48 hours before application).
Color/texture: Brown opaque fluid.
NLGI Grade: Solvent liquid
4-ball weld load: > 100 kgf
Available in 400 ml aerosol, 5 liter can and 20 liter can.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -30°C up to +60°C
Ropetex Ultra Lube 2 is an ecofriendly, advanced high-performance hybrid grease.
It is developed to perform in dockside, offshore and deep-water environments.
Furthermore, it has superior wash-off performance and is bio-degradable,
non-toxic and non-bio accumulative.
Ropetex Ultra Lube 2 is an Environmentally Acceptable Lubricant (EAL) and is fully VGP
2013 compliant. It can therefore be used on docksides, riversides, lakes and other
environmental sensitive locations.
Due to the composition of the product, it is stable over a wide temperature range, making it suitable for tropical environments.
Typical applications: Offshore cranes, dockside cranes; offshore and harbor installations; subsea installations.
Application methods: High pressure equipment or brushing.
Minimum application temperature: -5°C (Product should be kept to at least 10°C for 48 hours before application).
Color/texture: Matte black grease
NLGI grade: NLG2
Drop point: 154°C
Break point: -60°C
Relative density: 0.9 - 0.95
Hot salt spray test: 2880 hours
4-ball weld load: > 400 kgf
4-ball weld scar: 0,55 mm
Water spray-off: < 60% retention
Environmentally Acceptable Lubricant: YES
VGP 2013 compliant: YES
Available in 12,5 kg pail.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -40°C up to +120°C
Ropetex Heavy Duty Lube 70 is a medium thixotropic gel lubricant with stable properties over a wide temperature range. It offers excellent corrosion protection against
marine working conditions. Heavy Duty Lube 70 is formulated for long life on static or
dynamic ropes in highly aggressive environments. Additionally, it has a good wash-off
performance.
Typical applications: Offshore cranes, standing rigging, mooring ropes; tower ropes, outdoor winches.
Application methods: High pressure equipment or brushing
Minimum application temperature: -20°C
Color/texture: Glossy black gel.
NLGI Grade: NLG10
Hot salt spray test: 720 hours
4-ball weld load: > 180 kgf
Available in 12,5 kg pail.
Extra:
Do not forget to download the white paper with a lot of useful information about wire rope lubricants. It is free! (see the 'documents' tab).
Temperature range: -40°C up to +70°C
Cable sock - a tool for mounting of wire ropes.
Design: Double with both ends open.
Also available in special editions in larger sizes and stainless material.
Also available with a swivel.
Material: Galvanized wire netting.Warning: Not approved for lifting!
The cable grip ”Little Mule” is a device for gripping, pulling and tensioning wire rope and cables up to a tensile strength of 1770N/mm2.
Features:
The parallel jaws provide a firm grip without causing damage to the wire rope.
A special spring-loaded guide prevent the grip from dropping off the wire rope and allowes instant relaese without jamming.
The model LMG II-X is supplied with grooved jaws and is suitable for wire ropes up to a tensile strength of 1960Nmm2.
The grip is always depandant on the surface condition and rope diameter.
Warning: The clamp can not be used on greased wire rope. Not to be used for lifting and hoisting purposes.
Tool for mounting of wire ropes.
Design: One end closed with pressed thimble one end open.
Also available in special editions in larger sizes and stainless material.
Also with wire clamp.
Material: Galvanized wire netting.Warning: Not approved for lifting!
These wire grips are the ideal tool to safely tensioning of copper and steel cables. They have a wide range of applications in manufacturing, agriculture and bridge construction. The profile of the clamping jaws is specifically designed for copper and steel cables so that the stretched material does not become damaged.
Universal application: long, parallel tension clamping jaws made out of hardened and high-grade steel
Corrosion protection: galvanized and burnished components
Extremely durable and long-lasting: reliable, sophisticated process of cold-forming technology for the manufacturing of the jaws
Easy handling: ergonomic
Remote release possible: hole in clamping jaw
Self-acting holding: spring effect on the tensioned cable
Slip-resistant holding of the cable even at maximum traction
Note: With a tensile strength of 700N/mm2
2-component casting compound for the socketing of wire ropes in conical end fittings. Can be used for all types of wire ropes, giving 100% breaking load efficiency of the rope.
Note: At temperatures below 9°C Wirelock Booster should be used.
Cable sock is a tool for mounting of wire ropes.
Design: Both ends open with double pressed thimbles.
Also available in special editions in larger sizes and stainless material.
Also with double wire clamp (type 507).
Material: Galvanized wire netting.Warning: Not approved for lifting!
Verolube Spray is used for lubrication and is a very fluid rope lubricant. It penetrates well into the cable strands and provides corrosion protection, wear protection, water resistance, weather resistance and adhesion.
The wire rope lubricant has two major tasks: it should protect the rope from corrosion and it should minimize the friction between the rope elements themselves and between the rope and the sheave or the drum. A reduction of the friction reduces the actuating power and minimizes the wear of the rope, the sheaves and the drums. We differentiate between wax-based lubricants and oil-based lubricants. While wax-based lubricants offer a better handling of the ropes, the oil-based lubricants advantage is a better closing of the lubrication film due to the gravitational force of the oil. The quality of the wire rope lubricant has a great impact on the fatigue resistance of a wire rope
Packaging: Spray can 600 ml.
Colour: Black
Due to oil: Min
Fixed lubricants: C
Temperature range: -35 up to +65°
The STGL sailors tong is light weighted and can swage alu and cupper ferrules from size 1-3,5 mm. No need for extra tools.
STGS from 4-4,5 mm/5-6 mm.
Note: For full strength we recommend a swagger, to press the ferrule with full length in one stage.
CC04 is a one hand wire rope cutter for rope sizes up to 4 mm, CC12 up to 12 mm and CC18 up to 18 mm.
Note: The wire rope cutters are hand tolls. Only use with normal hand-power.