pewag
This table provides information on how to get the best use from the pewag lashing systems. This table also shows you the maximum load which can be secured with 1 lashing system given the angles and dynamic friction factors referred to. Please note that when friction lashing min. 2 lashing systems are needed. Additional securing methods (i.e. wedges, or similar) have not been taken into account. These could be used to secure loads with even higher weights. Please contact our customer service. The values in the table are applicable in the event that the same tension force (STF) is not effective in the lashing system on both sides of the load due to the deflection and edges. If this can be determined (e.g. using a pretensioning gauge), the values in the table may be increased by a factor of 1.3. The maximum loading weight depends on the STF value of the tensioning system – the value is shown on the lashing system‘s tag. Every lashing system has its own table. The maximum forces occurring due to acceleration, braking and avoidance maneuvers in road traffic acc. EN 12195-1 were taken into account. Other tables are applicable for transport by rail and sea. Please contact our customer service.
  • Grade: 12
Frictional lashing of loads on trucks_1
Currently this product cannot be added to an online quote. Please contact us directly for enquires.

 

Load binder with STF of: 1900 daN 

Angle to loading surface
Max. load/chain with dynamic friction factor
 
 
 
 
 
α
0,1
0,2
0,3
0,4
0,5
0,6
90
430
1.010
1.820
3.040
5.060
9.120
85
430
1.000
1.810
3.020
5.040
9.080
80
420
990
1.790
2.990
4.980
8.980
70
400
950
1.710
2.850
4.760
8.560
60
370
870
1.570
2.630
4.380
7.890
50
330
770
1.390
2.320
3.880
6.980
40
270
650
1.170
1.950
3.250
5.880
30
210
500
910
1.520
2.530
4.560

 

Load binder with STF of: 2200 daN 

Angle to loading surface
Max. load/chain with dynamic friction factor
 
 
 
 
 
α
0,1
0,2
0,3
0,4
0,5
0,6
90
500
1.170
2.110
3.520
5.860
10.560
85
500
1.160

2.100

3.500
5.840
10.510
80
490
1.150
2.070
3.460
5.770
10.390
70
470
1.100
1.980
3.300
5.510
9.920
60
430
1.010
1.820
3.040
5.080
9.140
50
380
890
1.610
2.690
4.490
8.080
40
320
750
1.350
2.260
3.770
6.780
30
250
580
1.050
1.760
2.930
5.280

 

Load binder with STF of: 2500 daN 

Angle to loading surface
Max. load/chain with dynamic friction factor
 
 
 
 
 
α
0,1
0,2
0,3
0,4
0,5
0,6
90
570
1.330
2.400
4.000
6.600
12.000
85
660
1.320
2.390
3.980
6.640
11.950
80
560
1.310
2.360
3.930
6.560
11.810
70
530
1.250
2.250
3.750
6.260
11.270
60
490
1.150
2.070
3.460
5.770
10.390
50
430
1.020
1.830
3.060
5.100
9.190
40
360
850
1.540
2.570
4.280
7.710
30
280
660
1.200
2.000
3.330
6.000

 

Load binder with STF of: 3000 daN 

Angle to loading surface
Max. load/chain with dynamic friction factor
 
 
 
 
 
α
0,1
0,2
0,3
0,4
0,5
0,6
90
680
1.600
2.880
4.800
8.000
14.400
85
680
1.590
2.880
4.780
7.960
14.340
80
670
1.570
2.830
4.720
7.870
14.180
70
640
1.500
2.710
4.510
7.510
13.530
60
590
1.380
2.490
4.150
6.920
12.480
50
520
1.220
2.200
3.670
6.120
11.030
40
440
1.020
1.850
3.080
5.140
9.250
30
340
800
1.440
2.400
4.000
7.200

Download CAD

Download CAD by choosing the desired product from the table above and the format from the menu below. Click "Get CAD" and after the load reaches 100% you can click on the download icon to download it. Please note that CAD drawings are only available if the icon at the right side of the table above is colored and not grayed out.

Get CAD
Download